Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor Protected environment (IEC 61753-131-03:2021)

This part of IEC 61753 contains the minimum tests, test severities and measurement requirements which a mechanical fibre splice need to satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in category OP (Outdoor protected) environments, as defined in IEC 61753-1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 131-3: Mechanische Spleiße für Einmoden- Lichtwellenleiter für die Kategorie OP - Freiluft, geschützte Umgebung (IEC 61753-131-03:2021)

Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 131-03 : Épissure mécanique de fibres unimodales pour catégorie OP - Environnement extérieur protégé (IEC 61753-131-03:2021)

IEC 61753-131-03:2021 indique les exigences minimales relatives aux essais, aux sévérités des essais ainsi qu’aux mesurages auxquelles il est nécessaire qu’une épissure mécanique de fibre satisfasse pour être classée comme satisfaisant aux exigences des épissures de fibres unimodales destinées à être utilisées dans des environnements de catégorie extérieur protégé (OP – Outdoor protected), tels qu’ils sont définis dans l’IEC 61753-1. Le présent document applicable aux épissures mécaniques définit les exigences de performance optique normalisée selon un ensemble de conditions spécifiées. La norme contient une série ou un ensemble d'essais et de mesurages dont les conditions, les sévérités et les critères d’acceptation/de rejet sont clairement indiqués. La série d'essais, à laquelle il est généralement fait référence en tant que catégorie de performance ou d'environnement de service de fonctionnement, est destinée à servir de base pour démontrer la capacité du produit à satisfaire aux exigences d'un secteur de marché, d'un groupe d'utilisateurs ou d'une application spécifique. Cette première édition annule et remplace l’IEC 61753-131-3 la première édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) ajout de définitions; b) ajout de l’IEC 60068-2-10 essai de moisissure et sévérité d'essai pour les matériaux; c) remplacement des essais de catégorie U de l’IEC 61753-1:2007 et de leurs sévérités par les essais de catégorie OP de l’IEC 61753‑1:2018; d) ajout de l’exigence de conformité des dimensions à l’IEC 61756-1; e) ajout de l'essai de moment de flexion; f) modification de la température basse dans l’essai de froid et l’essai de variations de température à −25°C. Si 40°C est exigé, l’utilisateur peut se reporter à la catégorie OP+.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 131-03. del: Enorodovna mehanska optična spojnica za kategorijo OP - Zunanje zaščiteno okolje (IEC 61753-131-03:2021)

General Information

Status
Published
Publication Date
08-Dec-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Nov-2021
Due Date
03-Feb-2022
Completion Date
09-Dec-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 61753-131-03:2022
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-131-03:2022
01-januar-2022
Nadomešča:
SIST EN 61753-131-3:2011

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 131-03. del:

Enorodovna mehanska optična spojnica za kategorijo OP - Zunanje zaščiteno
okolje (IEC 61753-131-03:2021)

Fibre optic interconnecting devices and passive components - Performance standard -

Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor Protected

environment (IEC 61753-131-03:2021)

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil

131-3: Mechanische Spleiße für Einmoden- Lichtwellenleiter für die Kategorie OP -

Freiluft, geschützte Umgebung (IEC 61753-131-03:2021)

Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -

Partie 131-03 : Épissure mécanique de fibres unimodales pour catégorie OP -
Environnement extérieur protégé (IEC 61753-131-03:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-131-03:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-131-03:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-131-03:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-131-03:2022
EUROPEAN STANDARD EN IEC 61753-131-03
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 33.180.20 Supersedes EN 61753-131-3:2011 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 131-03: Single-mode mechanical
fibre splice for category OP - Outdoor protected environment
(IEC 61753-131-03:2021)

Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive

fibroniques - Norme de performance - Partie 131-03: Bauteile - Betriebsverhalten - Teil 131-3: Mechanische

Épissure mécanique de fibres unimodales pour catégorie Spleiße für Einmoden- Lichtwellenleiter für die Kategorie

OP - Environnement extérieur protégé OP - Freiluft, geschützte Umgebung
(IEC 61753-131-03:2021) (IEC 61753-131-03:2021)

This European Standard was approved by CENELEC on 2021-11-08. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61753-131-03:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
European foreword

The text of document 86B/4500/FDIS, future edition 1 of IEC 61753-131-03, prepared by SC 86B

“Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics” was

submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61753-131-03:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2022–08–08

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2022–11–08

document have to be withdrawn

This document supersedes EN 61753-131-3:2011 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 61753-131-03:2021 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC 60721-3-2 NOTE Harmonized as EN IEC 60721-3-2
IEC 62005 (series) NOTE Harmonized as EN IEC 62005 (series)
---------------------- Page: 4 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-10 - Environmental testing - Part 2–10: Tests - EN 60068-2-10 -
Test J and guidance: Mould growth
IEC 60793-2-50 - Optical fibres - Part 2–50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61073-1 - Fibre optic interconnecting devices and EN 61073-1 -
passive components - Mechanical splices
and fusion splice protectors for optical
fibres and cables - Part 1: Generic
specification
IEC 61300 series Fibre optic interconnecting devices and EN 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2–1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2–5: Tests
- Torsion
IEC 61300-2-7 - Fibre optic interconnecting devices and EN 61300-2-7 -
passive components - Basic test and
measurement procedures - Part 2–7: Tests
- Bending moment
---------------------- Page: 5 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2–9: Tests
- Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2–17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2–18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-22 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures - Part 2–26:
Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and EN 61300-2-27 -
passive components - Basic test and
measurement procedures - Part 2–27:
Tests - Dust - Laminar flow
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 -
passive components - Basic test and
measurement procedures - Part 2–33:
Tests - Assembly and disassembly of fibre
optic mechanical splices, fibre
management systems and closures
IEC 61300-2-46 - Fibre optic interconnecting devices and EN IEC 61300-2-46 -
passive components - Basic test and
measurement procedures - Part 2–46:
Tests - Damp heat, cyclic
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3–3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures - Part 3–4:
Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3–6:
Examinations and measurements - Return
loss
---------------------- Page: 6 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3–7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3–28:
Examinations and measurements -
Transient loss
IEC 61753-1 - Fibre optic interconnecting devices and EN IEC 61753-1 -
passive components - Performance
standard - Part 1: General and guidance
IEC 61756-1 - Fibre optic interconnecting devices and EN IEC 61756-1 -
passive components - Interface standard
for fibre management systems - Part 1:
General and guidance
---------------------- Page: 7 ----------------------
SIST EN IEC 61753-131-03:2022
---------------------- Page: 8 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor
protected environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 131-03: Épissure mécanique de fibres unimodales pour catégorie OP –
Environnement extérieur protégé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-1029-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61753-131-03:2022
– 2 – IEC 61753-131-03:2021 © IEC 2021
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 6

4 General requirements ...................................................................................................... 7

4.1 General ................................................................................................................... 7

4.2 Storage, transportation and packaging .................................................................... 7

4.3 Marking and identification ....................................................................................... 7

4.4 Materials ................................................................................................................. 8

5 Test ................................................................................................................................. 8

5.1 General ................................................................................................................... 8

5.2 Test sample preparation ......................................................................................... 8

5.3 Test and measurement methods ............................................................................. 8

5.4 Acceptance criteria ................................................................................................. 9

5.5 Test report .............................................................................................................. 9

6 Performance tests, test severities and pass/fail requirements .......................................... 9

6.1 Sample size, sequencing and grouping ................................................................... 9

6.2 Dimensions ............................................................................................................. 9

6.3 Installation yield requirement .................................................................................. 9

6.4 Pass/fail criteria ...................................................................................................... 9

6.5 Detailed performance requirements tests .............................................................. 11

Annex A (normative) Fibre type for test samples .................................................................. 15

Annex B (normative) Sample size and product sourcing requirements ................................. 16

Bibliography .......................................................................................................................... 17

Table 1 – Pass/fail requirements ........................................................................................... 10

Table 2 – Performance requirements .................................................................................... 11

Table A.1 – Fibre type characteristics ................................................................................... 15

Table B.1 – Sample size per test .......................................................................................... 16

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 131-03: Single-mode mechanical fibre splice
for category OP – Outdoor protected environment
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

IEC 61753-131-03 has been prepared by subcommittee 86B: Fibre optic interconnecting

devices and passive components, of IEC technical committee 86: Fibre optics. It is an

International Standard.

This first edition cancels and replaces IEC 61753-131-3 first edition published in 2010. This

edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:
a) addition of definitions;

b) addition of IEC 60068-2-10 mould growth test and test severities for materials;

c) replacement of the IEC 61753-1:2007 category U tests and test severities by the

IEC 61753-1:2018 category OP tests;
---------------------- Page: 11 ----------------------
SIST EN IEC 61753-131-03:2022
– 4 – IEC 61753-131-03:2021 © IEC 2021

d) addition of the requirement that dimensions are in accordance with IEC 61756-1;

e) addition of the bending moment test;

f) change of low temperature in cold test and change of temperature test to −25°C. If 40°C is

required, the user can refer to category OP+.
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4500/FDIS 86B/4524/RVD

Full information on the voting for its approval can be found in the report on voting indicated in

the above table.
The language used for the development of this International Standard is English.

This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,

available at www.iec.ch/members_experts/refdocs. The main document types developed by

IEC are described in greater detail at www.iec.ch/standardsdev/publications.

A list of all parts in the IEC 61753 series, published under the general title Fibre optic

interconnecting devices and passive components – Performance standard, can be found on

the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under webstore.iec.ch in the data related to the

specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 12 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 131-03: Single-mode mechanical fibre splice
for category OP – Outdoor protected environment
1 Scope

This part of IEC 61753 contains the minimum tests, test severities and measurement

requirements which a mechanical fibre splice need to satisfy in order to be categorised as

meeting the requirements of single-mode fibre splice for use in category OP (Outdoor

protected) environments, as defined in IEC 61753-1.

This document for mechanical splices defines the requirements for standard optical

performance under a set of specified conditions. The standard contains a series or a set of

tests and measurements with clearly stated conditions, severities and pass/fail criteria. The

series of tests, commonly referred to as an operating service environment or performance

category, is intended to be a basis to prove the product’s ability to satisfy the requirements of

a specific application, market sector or user group.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

IEC 60068-2-10, Environmental testing – Part 2-10: Tests – Test J and guidance: Mould

growth

IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for

class B single-mode fibres

IEC 61073-1, Fibre optic interconnecting devices and passive components – Mechanical

splices and fusion splice protectors for optical fibres and cables – Part 1: Generic

specification

IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic

test and measurement procedures

IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 1: General and guidance

IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)

IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-4: Tests – Fibre or cable retention

IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-5: Tests – Torsion
---------------------- Page: 13 ----------------------
SIST EN IEC 61753-131-03:2022
– 6 – IEC 61753-131-03:2021 © IEC 2021

IEC 61300-2-7, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-7: Tests – Bending moment

IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-9: Tests – Shock

IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-17: Tests – Cold

IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance

IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-22: Tests – Change of temperature

IEC 61300-2-26, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-26: Tests – Salt mist

IEC 61300-2-27, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-27: Tests – Dust – Laminar flow

IEC 61300-2-33, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-33: Tests – Assembly and disassembly of fibre optic

mechanical splices, fibre management systems and closures

IEC 61300-2-46, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 2-46: Tests – Damp heat, cyclic

IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of

changes in attenuation and return loss

IEC 61300-3-4, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-4: Examinations and measurements – Attenuation

IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-6: Examinations and measurements – Return Loss

IEC 61300-3-7, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-7: Examinations and measurements – Wavelength
dependence of attenuation and return loss of single mode components

IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test

and measurement procedures – Part 3-28: Examinations and measurements – Transient loss

IEC 61753-1, Fibre optic interconnecting devices and passive components – Performance

standard – Part 1: General and guidance

IEC 61756-1, Fibre optic interconnecting devices and passive components – Interface

standard for fibre management systems – Part 1: General and guidance
3 Terms and definitions

For the purposes of this document, the terms and definitions given in IEC 61073-1 apply.

---------------------- Page: 14 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 7 –

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 General requirements
4.1 General

A product that has been shown to meet all the requirements of this performance standard can

be declared as conforming to this performance standard. Products having the same

classification from one manufacturer that satisfy this performance standard, will operate within

the boundaries set by the performance standard. There is no guarantee that products from

different manufacturers, having the same classification and which conform to the same

performance standard, will provide an equivalent level of performance when they are used

together.

Conformance to IEC environmental policy according to IEC Guide 109 and concerning the

need to reduce the impact on the natural environment of fibre management system products

during all phases of their life – from acquiring materials to manufacturing, distribution, use,

and end-of-life treatment (i.e. re-use, recycling – recovery and disposal) are not part of this

document, but will be covered in the generic specification.

Conformance to a performance standard demonstrates that a product has passed a design

verification test. It is not a guarantee of lifetime assured performance or reliability. Reliability

testing are the subject of a separate test schedule, where the tests and severities selected

are such that they are truly representative of the requirements of this reliability test

programme. Consistency of manufacture is maintained using a recognised quality assurance

programme whilst the reliability of product is evaluated using the procedures recommended in

IEC 62005 series.
Tests and measurements are selected from IEC 61300 (all parts).
4.2 Storage, transportation and packaging

The classes of environmental conditions and their severities to which the mechanical splice

can be exposed during transportation are defined in IEC 60721-3-1 and IEC 60721-3-2.

Normal transportation time is considered to be 30 days or less.

The product, in its original packaging, shall be suitable for normal public or commercial

transportation and storage in weather protected non-temperature controlled storage

environments and after installation meet the requirements as specified in Table 1 and Table 2.

4.3 Marking and identification

Marking of the packaging of the mechanical splice shall be according to IEC 61073-1.

Product m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.