SIST EN ISO 11111-1:2005/kprA1:2009

Textile machinery - Safety requirements - Part 1: Common requirements - Amendment 1 (ISO 11111-1:2005/FDAM 1:2009)

2009-04-20 EMA: ISO will consolidate the main text and its amendment (00214039). After closure of Formal Vote for WI 00214039, BT will be informed about the new edition of EN ISO 11111-1. The contents of the amendment will not be tagged in the new consolidated text.
DOW = 2009-12-28 as voted on e-balloting

Textilmaschinen - Sicherheitsanforderungen - Teil 1: Gemeinsame Anforderungen - Änderung 1 (ISO 11111-1:2005/FDAM 1:2009)

Matériel pour l'industrie textile - Exigences de sécurité - Partie 1: Exigences communes - Amendement 1 (ISO 11111-1:2005/FDAM 1:2009)

Tekstilni stroji - Varnostne zahteve - 1. del: Splošne zahteve - Dopolnilo 1 (ISO 11111-1:2005/FDAM 1:2009)

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Nov-2008
• ICS: 59.120.01 - Textile machinery in general
• Technical Committee: VSN - Safety of machinery
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 07-Apr-2010
• Due Date: 12-Apr-2010
• Completion Date: 12-Apr-2010
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: EN ISO 11111-1:2005/FprA1 - Textile machinery - Safety requirements - Part 1: Common requirements - Amendment 1 (ISO 11111-1:2005/FDAM 1:2009)

Relations

• Amends: SIST EN ISO 11111-1:2005 - Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2005)
• Effective Date: 02-Oct-2008
• Consolidated By: SIST EN ISO 11111-1:2009 - Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)
• Effective Date: 01-Nov-2009
• Amends: SIST EN ISO 11111-1:2005 - Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2005)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11111-1:2005/oprA1:2008
01-november-2008
Tekstilni stroji - Varnostne zahteve - 1. del: Splošne zahteve - Dopolnilo 1 (ISO
11111-1:2005/DAM 1:2008)
Textile machinery - Safety requirements - Part 1: Common requirements - Amendment 1
(ISO 11111-1:2005/DAM 1:2008)
Textilmaschinen - Sicherheitsanforderungen - Teil 1: Gemeinsame Anforderungen -
Änderung 1 (ISO 11111-1:2005/DAM 1:2008)
Matériel pour l'industrie textile - Exigences de sécurité - Partie 1: Exigences communes -
Amendement 1 (ISO 11111-1:2005/DAM 1:2008)
Ta slovenski standard je istoveten z: EN ISO 11111-1:2005/prA1
ICS:
59.120.01 Tekstilni stroji na splošno Textile machinery in general
SIST EN ISO 11111-1:2005/oprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
EUROPEAN STANDARD
DRAFT
EN ISO 11111-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2008
ICS 59.120.01

English Version
Textile machinery - Safety requirements - Part 1: Common
requirements - Amendment 1 (ISO 11111-1:2005/DAM 1:2008)
Matériel pour l'industrie textile - Exigences de sécurité - Textilmaschinen - Sicherheitsanforderungen - Teil 1:
Partie 1: Exigences communes - Amendement 1 (ISO Gemeinsame Anforderungen - Änderung 1 (ISO 11111-
11111-1:2005/DAM 1:2008) 1:2005/DAM 1:2008)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.
This draft amendment A1, if approved, will modify the European Standard EN ISO 11111-1:2005. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11111-1:2005/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
EN ISO 11111:2005/prA1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
EN ISO 11111:2005/prA1:2008 (E)
Foreword
This document (EN ISO 11111-1:2005/prA1:2008) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
Endorsement notice
The text of ISO 11111-1:2005/DAM 1:2008 has been approved by CEN as a EN ISO 11111-1:2005/prA1:2008
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
DRAFT AMENDMENT ISO 11111-1:2005/DAmd 1
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on: Voting terminates on:
2008-05-08 2008-10-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery — Safety requirements —
Part 1:
Common requirements
AMENDMENT 1
Matériel pour l'industrie textile — Exigences de sécurité —
Partie 1: Exigences communes
AMENDEMENT 1
ICS 59.120.01

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008

---------------------- Page: 7 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2008 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 11111-1:2005 was prepared by Technical Committee ISO/TC 72, Textile machinery and
accessories, Subcommittee SC 8, and by Technical Committee CEN/TC 214, Textile machinery and accessories
in collaboration.
Amendment to Clause Introduction
In the 5th para ISO 14121 shall be replaced with ISO 14121-1.


© ISO 2008 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008

---------------------- Page: 10 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
DRAFT AMENDMENT ISO 11111-1:2005/DAM 1

Amendments to Clause 1
In subclause 1.3, Add to read as follows:
"1.3 This and the other parts of ISO 11111 address hazards arising from the transport, assembly and
commissioning of the machinery…."
Amendments to Clause 2
ISO 10218:1992, Robots for industrial environments — Safety requirements — Part 1: Robot
shall be replaced with
ISO 10218:2006, Robots for industrial environments — Safety requirements — Part 1: Robot

ISO 11111-2:2005, Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning
machines
shall be replaced with
ISO 11111-2:2009, Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning
machines

ISO 11111-3:2005, Textile machinery — Safety requirements — Part 3: Nonwoven machinery
shall be replaced with
ISO 11111-3:2009, Textile machinery — Safety requirements — Part 3: Nonwoven machinery

ISO 11111-4:2005, Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope
manufacturing machinery
shall be replaced with
ISO 11111-4:2009, Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope
manufacturing machinery

ISO 11111-5:2005, Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and
knitting
shall be replaced with
ISO 11111-5:2009, Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and
knitting

© ISO 2008 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
ISO 11111-6:2005, Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
shall be replaced with
ISO 11111-6:2009, Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery

ISO 11111-7:2005, Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery
shall be replaced with
ISO 11111-7:2009, Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery

Add two new references:
ISO 11161:2007, Safety of machinery-Integrated manufacturing systems
ISO 11688-1, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1:
Planning

ISO 13849-1:1999, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for
design
shall be replaced with
ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for
design

ISO 13850:1996, Safety of machinery — Emergency stop — Principles for design
shall be replaced with
ISO 13850:2006, Safety of machinery — Emergency stop — Principles for design

ISO 13852:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the upper
limbs
shall be replaced with
ISO/DIS 13857:2006, Safety of machinery — Safety distances to prevent danger zones being reached by upper
and lower limbs

ISO 13853:1998, Safety of machinery — Safety distances to prevent danger zones being reached by the lower
limbs
shall be replaced with
2 © ISO 2008 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
ISO/DIS 13857:2006, Safety of machinery — Safety distances to prevent danger zones being reached by upper
and lower limbs

ISO 14119:1998, Safety of machinery — Interlocking devices associated with guards — Principles for design and
selection
shall be replaced with
ISO 14119/A1:2007, Safety of machinery — Interlocking devices associated with guards — Principles for design
and selection

ISO 14121:1999, Safety of machinery — Risk assessment — Part 1: Principles
shall be deleted and the following three normative references added
ISO 14121-1, Safety of machinery — Risk assessment — Part 1: Principles
ISO/TR 14121-2, Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
ISO/DIS 23771, Textile machinery — Design measures for reduction of the noise emissions from textile machinery

Delete the below two references
ISO 14163, Acoustics — Guidelines for noise control by silencers
ISO 15667, Acoustics — Guidelines for noise control by enclosures and cabins

IEC 60204-1:2000, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
shall be replaced with
IEC 60204-1:2005, Safety of machinery — Electrical equipment of machines — Part 1: General requirements

IEC 60447:1993, Man-machine interface (MMI) — Actuating principles
shall be replaced with
IEC 60447, Man-machine interface (MMI) — Actuating principles

IEC 60947-1-5:2000, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching
elements; Electromechanical control circuit devices
shall be replaced with
IEC 60947-5-1, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching
elements; Electromechanical control circuit devices
© ISO 2008 – All rights reserved 3

---------------------- Page: 13 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1

IEC 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual,
acoustic and tactile signals
shall be replaced with
IEC 61310-1:2007, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual,
acoustic and tactile signals

IEC 61496-1:1997, Safety of machinery — Electro-sensitive protective equipment — General requirements and
tests
shall be replaced with
IEC 61496-1:2004, Safety of machinery — Electro-sensitive protective equipment. General requirements and tests

IEC 61496-2:1997, Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements
for equipment using active opto-electronic protective devices
shall be replaced with
IEC 61496-2:2006, Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements
for equipment using active opto-electronic protective devices

IEC 61496-3:2001, Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements
for Active Opto-electronic Protective Devices responsive to Diffuse Reflection
shall be replaced with
IEC 61496-3:2006, Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements
for Active Opto-electronic Protective Devices responsive to Diffuse Reflection

Add new reference
IEC 62061:2005, Safety of machinery - Functional safety of safety-related electrical, electronic and programmable
electronic control systems

Delete the below reference
EN 563:1994, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish
temperature limit values for hot surfaces

EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and
movable guards
shall be replaced with
4 © ISO 2008 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
EN 953, Safety of machinery — Guards — General requirements for the design and construction of fixed and
movable guards

prEN 1005-2:2003, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery
and component parts of machinery
shall be replaced with
EN 1005-2, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and
component parts of machinery

prEN 1005-4:2002, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures
and movements in relation to machinery
shall be replaced with
EN 1005-4, Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and
movements in relation to machinery

EN 1760-1:1997, Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for the
design and testing of pressure sensitive mats and pressure sensitive floors
shall be replaced with
EN 1760-1, Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for the
design and testing of pressure sensitive mats and pressure sensitive floors

EN 1760-2:2001, Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the
design and testing of pressure sensitive edges and pressure sensitive bars
shall be replaced with
EN 1760-2, Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the
design and testing of pressure sensitive edges and pressure sensitive bars

Add two new normative references
EN 999, Safety of machinery — The positioning of protective equipment in respect of approach speeds of parts of
the human body
EN 1760-3, Safety of machinery — Pressure sensitive protective devices — Part 3: General principles for the
design and testing of pressure sensitive bumpers, plates, wires and similar devices
© ISO 2008 – All rights reserved 5

---------------------- Page: 15 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
Amendments to Clause 5
Change title of subclause 5.3.1 to read as follows:
5.3.1 Inherently safe design measures
Add new normative paragraph after "EXAMPLE"
For textile machinery the technical guidelines on inherently safe design according to ISO 12100-2:2003, clause 4
shall apply.
Change title and subsequent text of subclause 5.3.2 to read as follows:
5.3.2 Consideration of geometrical factors and physical aspects
For risk reduction of textile machinery the geometrical factors and physical aspects according to Table 1 and
according to 4.2 of ISO 12100-2:2003 shall apply.
Update Table 1 and change as follows
Table 1 — Risk reduction by design
Application Reference
Making machines safe by virtue of
⎯ avoiding sharp edges and corners, protruding parts, etc.,
ISO 13854, ISO/DIS 13857
⎯ the shape and the relative location of their mechanical component parts (see ISO 13854),
A.4 in this standard
⎯ the limitation of the actuating force (see A.4),
A.1 in this standard
⎯ the limitation of the mass and/or velocity (see A.1).

In 5.3.3, Reduction of risks by safeguarding, update Table 2 and change as follows
Table 2 — Safety requirements and/or measures for guards
Application Reference
ISO 12100-2:2003, 5.2
Guard selection, unless specified in Clause 6 of this part of ISO 11111 and in
ISO 11111-2 to ISO 11111-7
EN 953
ISO 12100-2:2003, 5.3
Guard design and construction
EN 953
EN 953
Guard fastening
ISO/DIS 13857:2006, Tables 1, 4 and 7
Guard arrangement, unless specified in Clause 6 of this part of ISO 11111
a
and in ISO 11111-2 to ISO 11111-7 and B.1
Guard interlocking, unless specified in Clause 6 of this part of ISO 11111 and ISO 14119:1998/A1:2007, Clauses 5, 6
in ISO 11111-2 to ISO 11111-7 and 7
Fence guard A.3 in this standard
a
The safety distances for guards shall apply to all positions for normal operation as well as setting, adjustment, maintenance work
and elimination of process faults.

6 © ISO 2008 – All rights reserved

---------------------- Page: 16 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
Update Table 3 and change as follows
Table 3 — Safety requirements and/or measures for safety devices
Application Reference
Selection of safety devices, unless specified in Clause 6 of ISO 12100-2:2003, 5.2
this part of ISO 11111 and in ISO 11111-2 to ISO 11111-7
Technical characteristics of safety devices ISO 12100-2:2003, 5.3.3
IEC 61496-1
Positioning of safety devices, unless specified in Clause 6 EN 999:1998, Clauses 5 to 7
of this part of ISO 11111 and in ISO 11111-2 to ISO 11111-
a
7

Interlocking (with and without guard locking):
⎯ selection ISO 14119:1998/A1:2007, Clause 7
ISO 14119:1998/A1:2007, Clauses 5
⎯ design
and 6
IEC 61496-1
b, d
Electro-sensitive protective equipment: IEC 61496-1
⎯
arrangement
EN 999:1998, Clause 6
b, d
Active opto-electronic protective devices (AOPD): IEC 61496-2
⎯ arrangement
EN 999:1998, Clause 6

⎯
safety distance (upper and lower limbs)
ISO/DIS 13857
Active opto-electronic protective devices responsive IEC 61496-3
b, d
to diffuse reflection(AOPDDR):

⎯ arrangement
EN 999:1998, Clause 6
ISO/DIS 13857
⎯
safety distance (upper and lower limbs)
d
Pressure-sensitive mats and floors: EN 1760-1
d
Pressure-sensitive edges and bars EN 1760-2
d
Pressure sensitive bumpers, plates, wires EN 1760-3
Two-hand controls: ISO 12100-1:2003, 3.26.4
IEC 60204-1:2005, 9.2.6.2
c
– selection  ISO 13851:2002, clause 4 and Annex B

EN 999: 1998, clause 8
– arrangement
Hold-to-run control devices (touch control, biased-off ISO 12100-1:2003, 3.26.3
switch) IEC 60204-1:2005, 9.2.6.1
Limited movement control device ISO 12100-1:2003, 3.26.9
a The safety distances for safety devices shall apply to all positions for normal operation as well as setting, adjustment,
maintenance work and elimination of process faults.
b The type selected according to IEC 61496-1 shall be consistent with the required performance level (PL) or safety
integrity level (SIL) of the safety-related part of the control system as defined in ISO 13849-1:2006,4.2.2 (or IEC
62061: 2005 ; 5.2.4.).
c The type selected according to ISO 13851 shall be consistent with the required performance level (PL) or safety
integrity level (SIL) of the safety-related part of the control system as defined in ISO 13849-1:2006,4.2.2 (or IEC
62061: 2005 ; 5.2.4.).
d Sensitive protective equipment (SPE) according to ISO 12100-1:2003, 3.26.5.
© ISO 2008 – All rights reserved 7

---------------------- Page: 17 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1

In 5.4.2.2, General safety requirements for electrical equipment, update Table 4 and change the references on IEC
60204-1:2005 as follows
Table 4 — Safety requirements for electrical equipment of machines
Reference
Electrical hazards
IEC 60204-1:2005
6 and 8
Electric shock
7 and 8
Overcurrent, overspeed and overload
4
Environmental influences
7.5
Restart after voltage drop or supply interruption
10, 11 and 16
Accessibility, layout and identification of control equipment
10 and 11
Ergonomics for manual operation
12 and 13
Cabling and wiring
15
Accessories and lighting
17
Documentation and instruction handbook
18
Testing

In 5.4.2.3, Specific safety requirements for control systems and devices, update Table 5 and change as follows
Table 5 — Safety requirements for control systems
Application Reference
Design of control system ISO 12100-2:2003, 4.11
Control circuits and functions IEC 60204-1:2005, Clause 9
Control interfaces IEC 60204-1:2005, Clause 10 and 11
Programmable electronic equipment ISO 13849-1 or IEC 62061
Control gear IEC 60204-1:2005, Clause 11
Fault exclusion/proven components ISO 13849-2:2003, Clause 7
Required Performance Level (PL) or ISO 13849-1 or
Safety Integrity Level (SIL) IEC 62061
Categories of resistance to faults ISO 13849-1: 2006, Clause 6
Control devices IEC 60204-1:2005, Clause 10
Safety signals, symbols and signs IEC 61310-1:1995, Clauses 5 to 8
Arrangement of control devices ISO 12100-2:2003, 4.8.8 and 4.11.8
Actuating principles IEC 60447:1993

Delete text below Table 5 including Figure 1 and change to read as follows:
If in clause 6 or in ISO 11111-2 to ISO 11111-7 a performance level (PL) according to ISO 13849-1:2006 or a
safety integrity level (SIL) according to IEC 62061:2005 has not been selected, a PL =c or SIL =1 shall at least be
used.
The adoption of a lower level than performance level PL = c or safety integrity level SIL = 1 shall be based on an
risk assessment in accordance with ISO 13849-1:2006, Annex A or IEC 62061:2005, Annex A.
8 © ISO 2008 – All rights reserved

---------------------- Page: 18 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
Where it is necessary to make fault exclusions for the used components to achieve the required performance level,
ISO 13849-2:2003 shall apply.
In 5.4.2.4, Specific safety requirements for starting and stopping, the references in Table 6 shall be modified and a
new line added (footnote a):
Table 6 — Safety requirements for starting and stopping
Application Reference
Starting ISO 12100-2:2003, 4.11.2 and 4.11.3
a
IEC 60204-1:2005: 9.2.2
Stopping
Unexpected start-up ISO 14118:2000, Clauses 5 and 6
Isolation from energy sources ISO 12100-2:2003, 5.5.4
IEC 60204-1:2005, clause 5
Start-up by inadvertent actuation 5.4.2.4 a)
5.4.2.4 a) and ISO 12100-2:2003 4.11.8
Observation of danger zones from main control position 5.4.2.4 b)
Start-up by unauthorized persons 5.4.2.4 b)
Automatic restart after process interruption 5.4.2.4 c)
Start-up after interruption of power supply IEC 60204-1:2005, 7.5
Emergency stopping 5.4.2.4 d)
ISO 12100-2:2003, 5.5.2
ISO 13850
IEC 60204-1:2005, 10.7 and 10.8
ISO 11161
a
Each workstation of the machine shall be provided with a control device for generating a safe normal stop according to IEC 60204-
1:2005; stop category 0 or 1. If additionally a stop control is required to generate an operational stop (according to EN 60204-1:2005;
stop category 2 ), the stop condition must be monitored and maintained.


Add new sentence at the end of item b) and new Note 2
In order to observe the danger zones from the control position, mirrors, screens and other viewing auxiliary means
may be used or the control console may be provided in an elevated position.
NOTE 2 For interconnected machines (integrated manufacturing systems) the safety requirements according to ISO 11161
can be used.
Update item d) and change as follows
d) Where a warning signal is used to warn against the start of a machine and to allow persons in danger to reach
a safeguarded place within sufficient time, the start/restart shall be according to ISO 11161:2007, 8.8 unless
otherwise indicated in ISO 11111-2 to ISO 11111-7.
In 5.4.4, Static electricity, item c), delete text and write as follows
c) providing information in the instruction handbook on avoiding static electricity. This information can be given e. g.
by indicating the minimum humidity to be provided by the air-conditioning system or by instruction on how to avoid
over-drying.
© ISO 2008 – All rights reserved 9

---------------------- Page: 19 ----------------------

SIST EN ISO 11111-1:2005/oprA1:2008
ISO 11111-1:2005/DAM 1
In 5.4.7, Noise reduction, safety requirements, change text below to read as follows
The safety requirements according to ISO/DIS 23771 shall be met.
nd
In 5.4.11, Fire, change 2 sentence to read as follows
In case fire is a significant hazard (see ISO 11111-2 to ISO 11111-7) this shall be achieve
...