SIST EN 1252-1:1999

Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C

This European standard specifies the toughness requirements of metallic materials for use at a temperature below - 80 oC to ensure their suitability for cryogenic vessels.  This standard is not applicable to unalloyed steels and cast materials.  This standard is not applicable to cryogenic vessels for liquefied natural gas (LNG).

Kryo-Behälter - Werkstoffe - Teil 1: Anforderungen an die Zähigkeit bei Temperaturen unter - 80°C

Diese Europäische Norm legt Anforderungen an die Zähigkeit von Werkstoffen fest, die bei Temperaturen unter -80°C verwendet werden können, um deren Eignung für den Einsatz für Kryo-Behälter sicherzustellen. Diese Norm gilt nicht für unlegierte Stähle und Gußwerkstoffe. Diese Norm gilt nicht für Kryo-Behälter für LNG.

Récipients cryogéniques - Matériaux - Partie 1: Exigences de tenacité pour les températures inférieures a -80°C

La présente norme européenne spécifie les exigences de tenacité des matériaux métalliques utilisables a une température inférieure a -80°C, pour assurer leur aptitude a l'emploi pour les récipients cryogéniques. La présente norme ne s'applique pas aux aciers non alliés et aux matériaux moulés. La présente norme ne s'applique pas aux récipients cryogéniques pour gaz naturel liquéfié (GNL).

Kriogene posode - Materiali - 1. del: Zahteve za žilavost za temperature pod -80 °C

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1998
• Withdrawal Date: 06-Feb-2017
• ICS: 23.020.40 - Cryogenic vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Feb-2017
• Due Date: 02-Mar-2017
• Completion Date: 07-Feb-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: EN 1252-1:1998 - Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C

Relations

• Corrected By: SIST EN 1252-1:1999/AC:1999 - Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
• Effective Date: 01-Sep-1999
• Replaced By: SIST EN ISO 21028-1:2017 - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
• Effective Date: 01-May-2017
• Replaced By: SIST EN ISO 21028-1:2017 - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN 1252-1:1999/AC:1999 - Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kriogene posode - Materiali - 1. del: Zahteve za žilavost za temperature pod -80 °CKryo-Behälter - Werkstoffe - Teil 1: Anforderungen an die Zähigkeit bei Temperaturen unter - 80°CRécipients cryogéniques - Matériaux - Partie 1: Exigences de tenacité pour les températures inférieures a -80°CCryogenic vessels - Materials - Part 1: Toughness requiremen
...