SIST EN 61851-22:2002
(Main)Electric vehicle conductive charging system -- Part 22: AC electric vehicle charging station
Electric vehicle conductive charging system -- Part 22: AC electric vehicle charging station
This part of EN 61851, together with part 1, gives the requirements for a.c. electric vehicle charging stations for conductive connection to an electric vehicle, with a.c. supply voltages according to EN 60038 up to 690 V.
Konduktive Ladesysteme für Elektrofahrzeuge -- Teil 22: Wechselstrom-Ladestation für Elektrofahrzeuge
Système de charge conductive pour véhicules électriques -- Partie 22: Borne de charge conductive en courant alternatif pour véhicules électriques
Cette partie de la EN 61851, associée à la partie 1, expose les exigences applicables aux bornes de charge en courant alternatif de véhicule électrique, pour le raccordement en mode conductif au véhicule, sous des tensions d'alimentation alternatives en conformité avec la EN 60038, pouvant aller jusqu'à 690 V.
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station (IEC 61851-22:2001)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 61851-22:2002
prva izdaja
STANDARD
september 2002
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging
station (IEC 61851-22:2001)
ICS 43.120 Referenčna številka
SIST EN 61851-22:2002(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61851-22
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2002
ICS 43.120
English version
Electric vehicle conductive charging system
Part 22: AC electric vehicle charging station
(IEC 61851-22:2001)
Système de charge conductive Konduktive Ladesysteme
pour véhicules électriques für Elektrofahrzeuge
Partie 22: Borne de charge conductive Teil 22: Wechselstrom-Ladestation
en courant alternatif pour véhicules für Elektrofahrzeuge
électriques (IEC 61851-22:2001)
(CEI 61851-22:2001)
This European Standard was approved by CENELEC on 2001-12-04. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61851-22:2002 E
---------------------- Page: 2 ----------------------
EN 61851-22:2002 - 2 -
Foreword
The text of document 69/129/FDIS, future edition 1 of IEC 61851-22, prepared by IEC TC 69, Electric
road vehicles and electric industrial trucks, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61851-22 on 2001-12-04.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-01-01
This European Standard shall be read in conjunction with EN 61851-1.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61851-22:2001 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60309-1 NOTE Harmonized as EN 60309-1:1999 (not modified).
IEC 60364-5-54 NOTE Harmonized as HD 384.5.54 S1:1988 (modified).
CISPR 11 NOTE Harmonized as EN 55011:1998 (modified).
CISPR 14 NOTE Harmonized as EN 55014 Series (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 61851-22:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.