iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13852-1:2004/AC:2005

(Amendment)

Cranes - Offshore cranes - Part 1: General - purpose offshore cranes

Cranes - Offshore cranes - Part 1: General - purpose offshore cranes

TC - Deletion of static test (6.2.3) and renumbering of subclauses

Krane - Offshore Krane - Teil 1: Offshore Krane für allgemeine Verwendung

Appareils de levage - Appareils de leage offshore - Partie 1 : Appareils de levage offshore pour usage général

Dvigala (žerjavi) - Dvigala na plavajočih objektih - 1. del: Dvigala na plavajočih objektih za splošne namene

General Information

Status
Withdrawn
Publication Date
28-Feb-2005
Withdrawal Date
18-Aug-2010
ICS
47.020.40 - Lifting and cargo handling equipment
53.020.20 - Cranes
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Aug-2010
Due Date
09-Sep-2010
Completion Date
19-Aug-2010
Ref Project
EN 13852-1:2004/AC:2004 - Cranes - Offshore cranes - Part 1: General - purpose offshore cranes

Relations

Replaced By
SIST EN 13852-1:2004/AC:2007 - Cranes - Offshore cranes - Part 1: General - purpose offshore cranes
Effective Date
01-Sep-2010
Corrects
SIST EN 13852-1:2004 - Cranes - Offshore cranes - Part 1: General - purpose offshore cranes
Effective Date
01-Mar-2005
Corrects
SIST EN 13852-1:2004 - Cranes - Offshore cranes - Part 1: General - purpose offshore cranes
Effective Date
08-Jun-2022

Buy Standard

EN 13852-1:2004/AC:2005EN 13852-1:2004/AC:2005
PreviousNext
Corrigendum
EN 13852-1:2004/AC:2005
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Krane - Offshore Krane - Teil 1: Offshore Krane für allgemeine VerwendungAppareils de levage - Appareils de leage offshore - Partie 1 : Appareils de levage offshore pour usage généralCranes - Offshore cranes - Part 1: General - purpose offshore cranes53.020.20DvigalaCranes47.020.40Dvigalna oprema in oprema za pretovorLifting and cargo handling equipmentICS:Ta slovenski standard je istoveten z:EN 13852-1:2004/AC:2004SIST EN 13852-1:2004/AC:2005en01-marec-2005SIST EN 13852-1:2004/AC:2005SLOVENSKI
STANDARD



SIST EN 13852-1:2004/AC:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13852-1:2004/ACDecember 2004Décembre 2004Dezember 2004ICS 47.020.01; 53.020.20English versionVersion FrançaiseDeutsche FassungCranes - Offshore cranes - Part 1: General - purpose offshore cranesAppareils de levage à charge suspendue -Grues offshore - Partie 1 : Grues offshorepour usage généralKrane - Offshore-Krane - Teil 1: Offshore-Krane für allgemeine VerwendungThis corrigendum becomes effective on 8 December 2004 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 8 décembre 2004 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 8.Dezember 2004 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13852-1:2004/AC:2004 D/E/FSIST EN 13852-1:2004/AC:2005



EN 13852-1:2004/AC:2004 (E/F/D) 2 English version
6.2.3 Static test is to be deleted. As a consequence 6.2.4, 6.2.5 and 6.2.6 b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13852-3:2021(Main)
Cranes - Offshore cranes - Part 3: Light offshore cranes
EN 13852-3:2021

This document applies to light offshore cranes including their supporting pedestals and structures.
NOTE   The supporting pedestal and structures such as columns and boom rests are covered by this standard to the extent where their main purpose is to support the crane.
This document is applicable to light offshore cranes, whose structures are made of steel.
The following characteristics distinguish light offshore cranes from other types of offshore cranes:
-   maximum rated capacity 20 tonnes, maximum load moment 300 tm;
-   limitation for off-board lifting operation Hs = 2,0 m and wind speed 15 m/s (3s gust);
-   maximum number of working cycles class U3 (C ≤ 125.000) according to EN 13001-1.
This document gives requirements for all significant hazards, hazardous situations and events relevant to light offshore cranes, when used as intended and under conditions foreseen by the risk assessment (see Clause 4).
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping or changing the configuration of the crane;
b)   non- fixed load lifting attachments, i.e. any item between the hook and the load;
c)   lifting operations in ambient temperatures below −20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   lifting operations involving more than one crane;
f)   accidental loads due to collisions or earthquakes;
g)   emergency personnel rescue operations (except training);
h)   subsea lifting operations;
i)   general purpose offshore cranes, floating cranes and motion compensated cranes.
This document is applicable for the lifting of personnel.
This document is applicable to light offshore cranes, which are manufactured after the date of approval by CEN of this document.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-1:2013(Main)
Cranes - Offshore cranes - Part 1: General purpose offshore cranes
EN 13852-1:2013

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of - or hazards relating to the following: a) fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane; b) lifting accessories, i.e. any item between the hook and the load; c) minimum design temperature below -20 °C; d) operations at an ambient temperature above 45 °C; e) lifting operations involving more than one crane; f) accidental loads due to collisions; g) hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 m; h) emergency rescue operations; (except training) i) subsea lifting operations. The significant hazards covered by this European standard are identified in Clause 4. This European Standard includes requirements for the lifting of personnel by a general-purpose offshore crane.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-2:2005(Main)
Cranes - Offshore cranes - Part 2: Floating cranes
EN 13852-2:2004

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures.
This document applies to cranes manufactured after the date of issue of this document.
This document does not cover:
a)   fabrication, assembly, dismantling or changing the configuration of the crane;
b)   lifting accessories, i.e. any item between the hook and the load;
c)   design temperature below -20 °C;
d)   operations at an ambient temperature above 50 °C;
e)   cranes covered by the Machinery Directive.
The significant hazards covered by this document are identified in clause 4.
This document includes requirements for lifting of persons. The use of cranes for lifting of persons may be subject to specific national regulations. Where National Authorities permit the use of a floating crane for the lifting of persons, the crane would at least need to fulfil the requirements of this standard and be adopted in accordance with the relevant National regulations for the lifting of persons.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13852-1:2009(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
FprEN 13852-1

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures and lifting of personnel.
The standard applies to cranes manufactured after the date of issue.
This European Standard does not cover the hazards involved with or the use of the following:
a)   fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane;
b)   lifting accessories, i.e. any item between the hook and the load;
c)   design temperature below – 40°C;
d)   operations at an ambient temperature above 40°C;
e)   lifting operations involving more than one crane;
f)   accidental loads due to collisions;
g)   hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 meters
h)   rescue operations;
i)   subsea lifting operations.
The significant hazards covered by this European standard are identified in Clause 4.
Where National Authorities permit the use of general-purpose offshore crane for the lifting of personnel, the crane would at least need to fulfil the requirements of this standard.

  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13852-1:2021(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
prEN 13852-1

This document applies to general purpose offshore cranes including their supporting pedestals and structures.
This document is applicable to general purpose offshore cranes, whose structures are made of steel.
This document provides requirements for all significant hazards, hazardous situations and events relevant to general purpose offshore cranes, for lifting of goods and lifting of persons, when used as intended and under the conditions foreseen by the risk assessment (see Clause 4).
This document is applicable to general purpose offshore cranes, which are manufactured after the date of approval by CEN of this document.
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping, installation or erecting of the crane;
b)   any item attached to the hook, such as loads, non-fixed load lifting attachments, lifting accessories, baskets, carriers and containers;
c)   lifting operations in ambient temperatures below - 20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   accidental loads as result of collisions, earthquakes, explosions, etc., which are not covered by exceptional loads defined in Table B.7 ;
f)   floating cranes (covered by EN13852-2), light offshore cranes (covered by FprEN13852-3) and 2D/3D motion compensated cranes;
g)   subsea lifting operations;
h)   lifting operations involving more than one crane;
i)   emergency rescue operations (except training).

  • Draft
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-3:2021(Main)
Cranes - Offshore cranes - Part 3: Light offshore cranes
EN 13852-3:2021

This document applies to light offshore cranes including their supporting pedestals and structures.
NOTE   The supporting pedestal and structures such as columns and boom rests are covered by this standard to the extent where their main purpose is to support the crane.
This document is applicable to light offshore cranes, whose structures are made of steel.
The following characteristics distinguish light offshore cranes from other types of offshore cranes:
-   maximum rated capacity 20 tonnes, maximum load moment 300 tm;
-   limitation for off-board lifting operation Hs = 2,0 m and wind speed 15 m/s (3s gust);
-   maximum number of working cycles class U3 (C ≤ 125.000) according to EN 13001-1.
This document gives requirements for all significant hazards, hazardous situations and events relevant to light offshore cranes, when used as intended and under conditions foreseen by the risk assessment (see Clause 4).
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping or changing the configuration of the crane;
b)   non- fixed load lifting attachments, i.e. any item between the hook and the load;
c)   lifting operations in ambient temperatures below −20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   lifting operations involving more than one crane;
f)   accidental loads due to collisions or earthquakes;
g)   emergency personnel rescue operations (except training);
h)   subsea lifting operations;
i)   general purpose offshore cranes, floating cranes and motion compensated cranes.
This document is applicable for the lifting of personnel.
This document is applicable to light offshore cranes, which are manufactured after the date of approval by CEN of this document.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-1:2013(Main)
Cranes - Offshore cranes - Part 1: General purpose offshore cranes
EN 13852-1:2013

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of - or hazards relating to the following: a) fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane; b) lifting accessories, i.e. any item between the hook and the load; c) minimum design temperature below -20 °C; d) operations at an ambient temperature above 45 °C; e) lifting operations involving more than one crane; f) accidental loads due to collisions; g) hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 m; h) emergency rescue operations; (except training) i) subsea lifting operations. The significant hazards covered by this European standard are identified in Clause 4. This European Standard includes requirements for the lifting of personnel by a general-purpose offshore crane.

  • Standard
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-2:2005(Main)
Cranes - Offshore cranes - Part 2: Floating cranes
EN 13852-2:2004

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures.
This document applies to cranes manufactured after the date of issue of this document.
This document does not cover:
a)   fabrication, assembly, dismantling or changing the configuration of the crane;
b)   lifting accessories, i.e. any item between the hook and the load;
c)   design temperature below -20 °C;
d)   operations at an ambient temperature above 50 °C;
e)   cranes covered by the Machinery Directive.
The significant hazards covered by this document are identified in clause 4.
This document includes requirements for lifting of persons. The use of cranes for lifting of persons may be subject to specific national regulations. Where National Authorities permit the use of a floating crane for the lifting of persons, the crane would at least need to fulfil the requirements of this standard and be adopted in accordance with the relevant National regulations for the lifting of persons.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13852-1:2009(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
FprEN 13852-1

This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures and lifting of personnel.
The standard applies to cranes manufactured after the date of issue.
This European Standard does not cover the hazards involved with or the use of the following:
a)   fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane;
b)   lifting accessories, i.e. any item between the hook and the load;
c)   design temperature below – 40°C;
d)   operations at an ambient temperature above 40°C;
e)   lifting operations involving more than one crane;
f)   accidental loads due to collisions;
g)   hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 meters
h)   rescue operations;
i)   subsea lifting operations.
The significant hazards covered by this European standard are identified in Clause 4.
Where National Authorities permit the use of general-purpose offshore crane for the lifting of personnel, the crane would at least need to fulfil the requirements of this standard.

  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 13852-1:2021(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
prEN 13852-1

This document applies to general purpose offshore cranes including their supporting pedestals and structures.
This document is applicable to general purpose offshore cranes, whose structures are made of steel.
This document provides requirements for all significant hazards, hazardous situations and events relevant to general purpose offshore cranes, for lifting of goods and lifting of persons, when used as intended and under the conditions foreseen by the risk assessment (see Clause 4).
This document is applicable to general purpose offshore cranes, which are manufactured after the date of approval by CEN of this document.
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping, installation or erecting of the crane;
b)   any item attached to the hook, such as loads, non-fixed load lifting attachments, lifting accessories, baskets, carriers and containers;
c)   lifting operations in ambient temperatures below - 20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   accidental loads as result of collisions, earthquakes, explosions, etc., which are not covered by exceptional loads defined in Table B.7 ;
f)   floating cranes (covered by EN13852-2), light offshore cranes (covered by FprEN13852-3) and 2D/3D motion compensated cranes;
g)   subsea lifting operations;
h)   lifting operations involving more than one crane;
i)   emergency rescue operations (except training).

  • Draft
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day