SIST EN 10258:1998
(Main)Cold-rolled stainless steel and narrow strip and cut lengths - Tolerances on dimensions and shape
Cold-rolled stainless steel and narrow strip and cut lengths - Tolerances on dimensions and shape
This European Standard applies to cold-rolled stainless, heat-resisting steel flat products in thicknesses up to and including 3,0 mm and rolled widths of less than 600 mm delivered as: a) narrow strip (coils with a rolled width < 600 mm), b) slit cold-rolled narrow strip, c) cut lengths obtained from slit cold- rolled narrow strip or cold-rolled narrow strip. It does not apply to cold- rolled stainless, heat resisting and creep resisting steel wide strip and plate/sheet (rolled width greater or equal to 600 mm, see EN 10259), or to cold-rolled products for which there is a specific standard.
Kaltband und Kaltband in Stäben aus nichtrostendem Stahl - Grenzabmaße und Formtoleranzen
Diese europäische Norm gilt für kaltgewalzte Flacherzeugnisse aus nichtrostenden und hitzebeständigen Stählen in Dicken < oder = 3,0 mm und in Walzbreiten < 600 mm, lieferbar als: a) Kaltband (in Rollen in Walzbreiten < 600 mm), b) Längsgeteiltes Kaltband, c) Stäbe (abgelängt aus längsgeteiltem Kaltband oder Kaltband).
Feuillards ou feuillards coupés a longueur en acier inoxydable laminés a froid - Tolérances sur les dimensions et la forme
La présente norme européenne est applicable aux produits plats laminés a froid en acier inoxydable et en acier réfractaire, d'épaisseur < ou égale a 3,0 mm et de largeur de laminage inférieure a 600 mm, livrés sous forme de: a) feuillard (bobines avec largeur laminée < 600 mm), b) feuillard refendu, c) feuillard coupé a longueur (flan) obtenu a partir de feuillard refendu ou du feuillard d'origine.
Hladno valjani ozki trakovi iz nerjavnih jekel in razrez - Mejni odstopki mer in tolerance oblik
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno valjani ozki trakovi iz nerjavnih jekel in razrez - Mejni odstopki mer in tolerance oblikKaltband und Kaltband in Stäben aus nichtrostendem Stahl - Grenzabmaße und FormtoleranzenFeuillards ou feuillards coupés a longueur en acier inoxydable laminés a froid - Tolérances sur les dimensions et la formeCold-rolled stainless steel and narrow strip and cut lengths - Tolerances
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.