SIST EN 62134-1:2010

Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification (IEC 62134-1:2009)

This part of IEC 62134 establishes uniform generic requirements for fibre optic closures. This standard does not cover test and measurement procedures, which are described in IEC 61300 series.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleitergarnituren - Teil 1: Fachgrundspezifikation (IEC 62134-1:2009)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Boitiers à fibres optiques - Partie 1: Spécification générique (CEI 62134-1:2009)

La CEI 62134-1:2009 établit des exigences génériques communes relatives aux boîtiers à fibres optiques. La présente norme ne couvre pas les procédures d'essais et de mesure, qui sont décrites dans la série CEI 61300. Les modifications principales par rapport à l'édition précédente sont:  - ajout ou reformulation de certains termes et définitions;  - reconsidération des types, modèles et variantes dans les exigences;  - suppression des procédures d'évaluation de la qualité.",PE

Optični spojni elementi in pasivne komponente - Optična ohišja - 1. del: Rodovna specifikacija (IEC 62134-1:2009)

Ta del IEC 62134 vzpostavlja enotne rodovne zahteve za optična ohišja. Ta standard ne zajema preskusnih in meritvenih postopkov, ki so opisani v seriji IEC 61300.

General Information

• Status: Withdrawn
• Publication Date: 23-Dec-2009
• Withdrawal Date: 21-Jan-2025
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Jan-2025
• Due Date: 14-Feb-2025
• Completion Date: 22-Jan-2025
• Ref Project: EN 62134-1:2009 - Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification

Relations

• Replaces: SIST EN 62134-1:2004 - Fibre optic enclosures -- Part 1: Generic specification
• Effective Date: 01-Jan-2010
• Revised: SIST EN 62134-1:2004 - Fibre optic enclosures -- Part 1: Generic specification
• Effective Date: 05-Oct-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2010
1DGRPHãþD
SIST EN 62134-1:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQDRKLãMDGHO5RGRYQD
VSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic closures - Part
1: Generic specification (IEC 62134-1:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile -
Lichtwellenleitergarnituren - Teil 1: Fachgrundspezifikation (IEC 62134-1:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Boitiers à fibres
optiques - Partie 1: Spécification générique (CEI 62134-1:2009)
Ta slovenski standard je istoveten z: EN 62134-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62134-1
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 33.180.99 Supersedes EN 62134-1:2002

English version
Fibre optic interconnecting devices and passive components -
Fibre optic closures -
Part 1: Generic specification
(IEC 62134-1:2009)
Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Boitiers à fibres optiques - und passive Bauteile -
Partie 1: Spécification générique Lichtwellenleitergarnituren -
(CEI 62134-1:2009) Teil 1: Fachgrundspezifikation
(IEC 62134-1:2009)
This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62134-1:2009 E
Foreword
The text of document 86B/2846/FDIS, future edition 2 of IEC 62134-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62134-1 on 2009-10-01.
This European Standard supersedes EN 62134-1:2002.
The main changes with respect to EN 62134-1:2002 are listed below:
– addition and rewording of some terms and definitions;
– reconsideration of type, style and variant in the requirements;
– removal of quality assessment procedures.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2010-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62134-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61073-1 NOTE  Harmonized as EN 61073-1:2009 (not modified).
IEC 61756-1 NOTE  Harmonized as EN 61756-1:2006 (not modified).
IEC 61758-1 NOTE  Harmonized as EN 61758-1:2008 (not modified).
__________
- 3 - EN 62134-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
1)
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication

IEC 60068 Series Environmental testing EN 60068 Series

1) 2)
IEC 60068-2-10 - Environmental testing - EN 60068-2-10 2005
Part 2-10: Tests - Test J and guidance:
Mould growth
IEC 60617 Data- Graphical symbols for diagrams - -
base
IEC 60695 Series Fire hazard testing EN 60695 Series

1) 2)
IEC 60695-1-1 - Fire hazard testing - EN 60695-1-1 2000
Part 1-1: Guidance for assessing the fire
hazard of electrotechnical products - General
guidelines
1) 2)
IEC 60793-2 - Optical fibres - EN 60793-2 2008
Part 2: Product specifications - General

1) 2)
IEC 60794-2 - Optical fibre cables - EN 60794-2 2003
Part 2: Indoor cables - Sectional specification

1) 2)
IEC 60825-1 - Safety of laser products - EN 60825-1 2007
Part 1: Equipment classification and
requirements
IEC 61300-2 Series Fibre optic interconnecting devices and EN 61300-2 Series
passive components - Basic test and
measurement procedures -
Part 2: Tests
IEC 61300-3 Series Fibre optic interconnecting devices and EN 61300-3 Series
passive components - Basic test and
measurement procedures -
Part 3: Examinations and measurements

1) 2)
IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 61754 Series Fibre optic connector interfaces EN 61754 Series

1)
IEC/TR 61930 - Fibre optic graphical symbology - -

1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1)
IEC/TR 61931 - Fibre optic - Terminology - -

IEC 62005 Series Reliability of fibre optic interconnecting EN 62005 Series
devices and passive components

IEC QC 001002-3 2005 IEC Quality Assessment System - -
for Electronic Components (IECQ) - Rules of
Procedure -
Part 3: Approval procedures
1)
ISO 129-1 - Technical drawings - Indication of dimensions - -
and tolerances -
Part 1: General principles
1) 2)
ISO 286-1 - ISO system of limits and fits - EN 20286-1 1993
Part 1: Bases of tolerances, deviations and fits

1) 2)
ISO 1101 - Geometrical Product Specifications (GPS) - EN ISO 1101 2005
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out

1) 2)
ISO 4892-3 - Plastics - Methods of exposure to laboratory EN ISO 4892-3 2006
light sources -
Part 3: Fluorescent UV lamps
1)
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 62134-1 ®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
closures –
Part 1: Generic specification
Dispositifs d’interconnexion et composants passifs à fibres optiques – Boîtiers
à fibres optiques –
Partie 1: Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 33.180.99 ISBN 2-8318-1050-8
– 2 – 62134-1 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms and definitions .8
4 Requirements .10
4.1 Classification.10
4.1.1 General .10
4.1.2 Type.10
4.1.3 Style.11
4.1.4 Variant .11
4.1.5 Arrangement.12
4.1.6 Normative reference extensions .12
4.1.7 Environmental category – Service categories .13
4.2 Documentation .13
4.2.1 Specification system.13
4.2.2 Symbols .15
4.2.3 Drawings .15
4.2.4 Measurements.15
4.2.5 Tests .15
4.2.6 Test reports .16
4.2.7 Instructions for use.16
4.3 Standardisation system .16
4.3.1 Specification standards .16
4.3.2 Interface standards.16
4.3.3 Performance standards.16
4.3.4 Reliability standards .17
4.4 Design and construction .18
4.4.1 Materials .18
4.5 Workmanship .18
4.6 Quality .18
4.7 Performance.19
4.8 Identification and marking .19
4.8.1 General .19
4.8.2 Variant identification number .19
4.8.3 Component marking .19
4.8.4 Package marking.19
4.9 Storage conditions .19
4.10 Safety .19
Bibliography.21

Figure 1 – Standardisation system .18

62134-1 © IEC:2009 – 3 –
Table 1 – Operating service environments .13
Table 2 – Multilevel IEC specification structure.14

– 4 – 62134-1 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
———————
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
FIBRE OPTIC CLOSURES –
Part 1: Generic specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organisation for standardisation comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardisat
...