SIST EN 12266-1:2012
(Main)Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
This standard specifies mandatory requirements for tests, test procedures and acceptance criteria for production testing of industrial valves.
The specified tests may also be used as type tests or acceptance tests.
When specified as a normative reference in a valve product or performance standard, this standard has to be considered in conjunction with the specific requirements of that valve product or performance standard. Where requirements in a product or performance standard differ from those given in this standard, the requirements of the product or performance standard apply.
Industriearmaturen - Prüfung von Armaturen aus Metall - Teil 1: Druckprüfungen, Prüfverfahren und Annahmekriterien - Verbindliche Anforderungen
Diese Europäische Norm legt verbindliche Anforderungen an Prüfungen, Prüfverfahren und Annahmekriterien für die fertigungsbegleitende Prüfung von Industriearmaturen aus metallischen Werkstoffen fest.
Die festgelegten Prüfungen können auch als Typ- oder Annahmeprüfungen angewendet werden.
Wenn diese Europäische Norm als normative Verweisung in einer Produkt- oder Gebrauchstauglichkeitsnorm für Armaturen aufgeführt ist, muss sie im Zusammenhang mit den festgelegten Anforderungen dieser Produkt- oder Ge¬brauchstauglichkeitsnorm betrachtet werden. Wenn sich die Anforderungen in einer Produkt- oder Gebrauchs¬tauglichkeitsnorm von den in dieser Europäischen Norm festgelegten Anforderungen unterschei¬den, dann gelten die Anforderungen der Produkt- oder Gebrauchstauglichkeitsnorm.
ANMERKUNG Für die Prüfung von Industriearmaturen aus Kunststoffen gelten ISO 9393-1 und ISO 9393-2.
Robinetterie industrielle - Essais des appareils de robinetterie métalliques - Partie 1: Essais sous pression, modes opératoires d'essai et critères d'acceptation - Prescriptions obligatoires
La présente Norme européenne spécifie les prescriptions obligatoires pour les essais, les modes opératoires d’essai et les critères d’acceptation pour les essais en production de la robinetterie industrielle en matériaux métalliques.
Les essais prescrits peuvent aussi être utilisés en tant qu’essais de type, ou essais de réception.
Lorsque la présente Norme européenne est spécifiée en tant que référence normative dans une norme de produit ou de performance, elle doit être considérée conjointement aux prescriptions données de cette norme de produit ou de performance. Lorsque des prescriptions d’une norme de produit ou de performance diffèrent de celles données dans la présente Norme européenne, alors les prescriptions de la norme de produit ou de performance s’appliquent.
NOTE Pour les essais d'appareils de robinetterie industriels en matériaux thermoplastiques, voir l'ISO 9393-1 et l'ISO 9393-2.
Industrijski ventili - Preskušanje kovinskih ventilov - 1. del: Tlačni preskusi, postopki preskušanja in prevzemni pogoji - Obvezujoče zahteve
Ta evropski standard določa zahteve za preskuse, postopke preskušanja in prevzemne pogoje za proizvodno preskušanje industrijskih ventilov, izdelanih iz kovinskih materialov. Predpisani preskusi se lahko uporabijo tudi kot tipski preskusi ali prevzemni preskusi. Standard EN 12266-1 ne zajema varnostnih naprav. Kadar je ta evropski standard v standardu za izdelek ali lastnosti ventila naveden v okviru zvez z drugimi standardi, ga je treba upoštevati skupaj z danimi posebnimi zahtevami standarda za izdelek ali lastnosti ventila. Kadar se zahteve v standardu za izdelek ali lastnosti razlikujejo od zahtev iz tega evropskega standarda, se uporabljajo zahteve standarda za izdelek ali lastnosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industriearmaturen - Prüfung von Armaturen aus Metall - Teil 1: Druckprüfungen, Prüfverfahren und Annahmekriterien - Verbindliche AnforderungenRobinetterie industrielle - Essais des appareils de robinetterie métalliques - Partie 1: Essais sous pression, modes opératoires d'essai et critères d'acceptation - Prescriptions obligatoiresIndustrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 12266-1:2012SIST EN 12266-1:2012en,fr,de01-julij-2012SIST EN 12266-1:2012SLOVENSKI
STANDARDSIST EN 12266-1:20031DGRPHãþD
SIST EN 12266-1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12266-1
April 2012 ICS 23.060.01 Supersedes EN 12266-1:2003English Version
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
Robinetterie industrielle - Essais des appareils de robinetterie métalliques - Partie 1: Essais sous pression, procédures d'essai et critères d'acceptation - Prescriptions obligatoires
Industriearmaturen - Prüfung von Armaturen aus Metall - Teil 1: Druckprüfungen, Prüfverfahren und Annahmekriterien - Verbindliche Anforderungen This European Standard was approved by CEN on 25 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12266-1:2012: ESIST EN 12266-1:2012
EN 12266-1:2012 (E) 2 Contents Page Foreword . 3Introduction . 41Scope . 52Normative references . 53Terms and definitions . 54Test requirements . 65Designation . 7Annex A (normative)
Test procedures and acceptance criteria . 8A.1General requirements . 8A.2Shell strength, test reference, P10 . 10A.3Shell tightness, test reference, P11 . 12A.4Seat tightness, test reference P12 . 13Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC (PED) . 16Bibliography . 17 SIST EN 12266-1:2012
EN 12266-1:2012 (E) 3 Foreword This document (EN 12266-1:2012) has been prepared by Technical Committee CEN/TC 69 “Industrial valves”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. This document supersedes EN 12266-1:2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC (PED). For relationship with EU Directive 97/23/EC (PED), see informative Annex ZA, which is an integral part of this document. The main changes compared to the previous edition are: a) the scope was specified and editorially revised; b) the normative references were updated; c) Clause 3 Terms and definitions was revised; d) Clause 4 Test requirements was changed; e) A.1.6 Allowable pressure at room temperature was deleted; f) Table A.2, "Minimum test duration for shell tests" has been updated; g) Annex ZA was revised; h) Bibliography was updated. EN 12266, Industrial valves — Testing of metallic valves consists of the following parts: Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements Part 2: Tests, test procedures and acceptance criteria — Supplementary requirements EN 12266-1 was drawn up on the basis of International Standard ISO 5208:1993. EN 12266-2 contains supplementary testing requirements for tests, test procedures and acceptance criteria of valves. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12266-1:2012
EN 12266-1:2012 (E) 4 Introduction The purpose of this European Standard is to establish certain basic requirements for production pressure testing of industrial valves in order to ensure uniform tests and test procedures. Tests and procedures given in this European Standard may also be used, if required, for type tests and acceptance tests. Special requirements, which are specific to one product or one performance standard only, are not included in this European Standard. Details should be included in the appropriate standard.
SIST EN 12266-1:2012
EN 12266-1:2012 (E) 5 1 Scope This European Standard specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials. The specified tests may also be used as type tests or acceptance tests. Safety devices are not covered by EN 12266-1. When specified as a normative reference in a valve product or performance standard, this European Standard is to be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply. NOTE For testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 736-1:1995, Valves — Terminology — Part 1: Definition of types of valves EN 736-2:1997, Valves — Terminology — Part 2: Definition of components of valves EN 736-3:2008, Valves — Terminology — Part 3: Definition of terms EN 1349, Industrial process control valves 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 736-1:1995, EN 736-2:1997,
EN 736-3:2008 and the following apply. 3.1 shell test test at a pressure in excess of the cold working pressure (3.7) rating of a valve for the purpose of validating the soundness and strength of the valve pressure containing and retaining structures Note 1 to entry: These structures include valve-actuating mechanisms that have a direct connection to the valve internals subject to fluid test pressure within the valve proper. 3.2 test pressure internal pressure (gauge), expressed in bar 1) to which the valve under testing is subjected Note 1 to entry: Unless otherwise noted, gauge pressure is used throughout this European Standard. 3.3 test fluid pressurized liquid or gas used to test a valve
1 1 bar = 105 Pa. SIST EN 12266-1:2012
EN 12266-1:2012 (E) 6 3.4 test fluid temperature temperature of the test fluid, ≥ 5 °C and ≤ 40 °C 3.5 DN, NPS alphanumeric designation of size that is common for components used in a piping system, used for reference purposes, comprising the letters “DN or NPS” followed or preceded by a dimensionless number indirectly related to the physical size of the bore or outside diameter of the end connections Note 1 to entry: The number following “DN or NPS” does not represent a measurable value and should not be used for calculation purposes except where specified in a product standard. 3.6 PN or Class alphanumeric designation for pressure-temperature rating that is common for components used in a piping system, used for reference purposes, comprising the letters “PN or Class” followed by a dimensionless number indirectly related to the pressure retaining capability as a function of temperature of the component 3.7 cold working pressure CWP maximum fluid pressure assigned to a valve for operation at a fluid temperature of – 20 °C to 38 °C Note 1 to entry: Valve pressure-temperature ratings are specified in product standards by reference to PN or Class designations. 3.8 double block-and-bleed valve valve with two separate closure seating surfaces that, when in the closed position, block the flow from both ends when the cavity between the two seating surfaces is vented through a bleed connection between the body cavity and the outside environment 4 Test requirements Test procedures and acceptance criteria shall be as given in Table 1 and Annex A. a) Shell strength test P10 is mandatory for every valve except when a statistical sampling is permitted. b) Shell tightness test P11 is mandatory for every valve except when a statistical sampling is accepted. c) Seat tightness test P12 is mandatory for every isolating and check valve except when a statistical sampling is accepted. The seat tightness test for control valves shall be in accordance with EN 1349. SIST EN 12266-1:2012
EN 12266-1:2012 (E) 7 Table 1 — Requirements for tests, test procedures and acceptance criteria Test Purpose Test procedure and acceptance criteria Title Test reference
Shell strength a P10 To confirm the pressure containing capability of the shell against internal pressure see
EN 12266-1:2012, A.2 Shell tightness a P11 To confirm the leak tightness of the shell including the operating mechanism sealing against internal pressure see
EN 12266-1:2012, A.3 Seat tightness for valves b P12 To confirm the capability of the seat(s) to comply with the specified leakage rate: at the time of manufacture; in the direction(s) for which the valve is designed. see
EN 12266-1:2012, A.4 Obturator strength c P20 To check the pressure containing capability of the obturator see
EN 12266-2:2012, A.2 a The shell strength and shell tightness tests may be carried out at the same time. b See Table A.3 for the type of valve. c To check the pressure containing capability of the obturator, if valve is used as the single means of insulation between the content of an item of pressure equipment and the downstream equipment not designed to withstand the upstream pressure.
5 Designation Tests in accordance with this European Standard shall be designated by the following elements: title of test and test reference; EN 12266-1. EXAMPLE Shell strength, Test P10 — EN 12266-1 SIST EN 12266-1:2012
EN 12266-1:2012 (E) 8 Annex A (normative)
Test procedures and acceptance criteria A.1 General requirements A.1.1 Purpose These general requirements shall be applied to all the test procedures detailed in this annex. Safety aspects of valve testing are not covered in this European Standard. NOTE Users of this European Standard should analyse the hazard resulting from the pressure and take proper safety precautions. A.1.2 Test equipment The test equipment shall be of such a design that it does not subject the valve to externally applied loads which may affect the results of the test. NOTE The test equipment can apply external loads sufficient to react to the forces resulting from the test pressure. When using test equipment and procedures different to that detailed in this European Standard, the manufacturer shall be able to demonstrate the equivalence of such test procedures and acceptance criteria with the requirements of this European Standard. A.1.3 Measuring equipment The measuring equipment shall be capable of measuring fluid pressure with an accuracy of ± 5 % of the required test pressure. A.1.4 Painted, coated or lined valves Before the shell strength test, reference P10, and the shell tightness test, reference P11, valves shall not be painted externally or otherwise coated with materials capable of sealing against leakage from external surfaces of the shell. Valves with liners, internal linings or coatings forming a design feature of the valve may be tested with the liner, after lining or coating. Attention shall be given that the liners, internal linings or coatings are not damaged by the test procedure. NOTE If tests in the presence of a representative of the purchaser are specified, painted or coated valves from stock may be retested without removal of painting or coating. A.1.5 Test fluid The test fluid to be used shall be: either a liquid (water which may contain a corrosion inhibitor, or any other suitable liquid having a viscosity not greater than water); a gas (air or other suitable gas). SIST EN 12266-1:2012
EN 12266-1:2012 (E) 9 Relevant detailed test procedures are specified in A.2.2.1, A.3.2.1 and A.4.2.1. The test fluid temperature shall be between 5 °C and 40 °C. A.1.6 Equivalent DN numbers For the purpose of calculating seat leakage rates and test duration times it is necessary to establish the equivalent DN number for those valves which are designated other
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.