SIST-TS CEN ISO/TS 80004-4:2015
(Main)Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)
This Technical Specification gives terms and definitions for materials in the field of nanotechnologies where one or more components are nanoscale regions and the materials exhibit properties attributable to the presence of those nanoscale regions. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.
Materials have topographical or compositional features at the nanoscale, but this is not sufficient to classify the material as nanostructured. Materials classified as nanostructured have an internal or surface structure with a significant fraction of features, grains, voids or precipitates in the nanoscale. Articles that contain nano-objects or nanostructured materials are not necessarily nanostructured materials themselves.
This Technical Specification includes nanodispersion.
Nanotechnologien - Fachwörterverzeichnis - Teil 4: Nanostrukturierte Materialien (ISO/TS 80004-4:2011)
In dieser Technischen Spezifikation sind Begriffe für Materialien auf dem Gebiet der Nanotechnologie angeführt, wobei einer Komponente oder mehreren Komponenten nanoskalige Bereiche zugeordnet sind; die Materialien zeigen Eigenschaften, die auf das Vorhandensein dieser Bereiche im Nanomaßstab zurückzuführen sind. Diese Spezifikation ist dafür vorgesehen, die Kommunikation zwischen Organisationen und Einzelpersonen in der Industrie und den Partnern, die mit ihnen zusammenarbeiten, zu vereinfachen.
Die Materialien haben topographische oder kompositorische Merkmale im Nanomaßstab, was jedoch nicht ausreicht, das Material als nanostrukturiert zu klassifizieren. Materialien, die als nanostrukturiert bezeichnet werden, haben in ihrer inneren Struktur oder in ihrer Oberflächenstruktur einen signifikanten Anteil an nanoskaligen Merkmalen, Körnern, Hohlräumen oder Ausscheidungen. Erzeugnisse, die herstellungsbedingt Nanoobjekte oder nanostrukturierte Materialien enthalten, müssen nicht selber nanostrukturierte Materialien sein.
Diese Technische Spezifikation schließt Nanodispersion ein.
Nanotechnologies - Vocabulaire - Partie 4: Matériaux nanostructurés (ISO/TS 80004-4:2011)
L'ISO/TS 80004-4:2011 établit les termes et définitions relatifs aux matériaux du domaine des nanotechnologies, c'est-à-dire les matériaux qui comprennent une ou plusieurs régions à l'échelle nanométrique et qui présentent des propriétés imputables à la présence de ces régions à l'échelle nanométrique. Elle est destinée à faciliter la communication entre les organismes et les individus du secteur industriel et leurs interlocuteurs.
Les matériaux possèdent des caractéristiques topographiques et de composition à l'échelle nanométrique, mais ce critère n'est pas suffisant pour qu'ils soient classés parmi les matériaux nanostructurés. Les articles qui contiennent des nano-objets ou des matériaux nanostructurés ne sont pas nécessairement eux-mêmes des matériaux nanostructurés.
L'ISO/TS 80004-4:2011 inclut la nanodispersion.
Nanotehnologije - Slovar - 4. del: Nanostrukturirani materiali (ISO/TS 80004-4:2011)
Ta tehnična specifikacija podaja izraze in definicije za materiale na področju nanotehnologij, pri čemer je ena ali več komponent nanovelikosti, materiali pa kažejo lastnosti, ki jih je mogoče pripisati prisotnosti teh predelov v nanovelikosti. Namenjena je lajšanju komuniciranja med organizacijami in posamezniki v industriji ter osebami, ki stopajo v stike z njimi.
Materiali imajo topografske ali kompozicijske lastnosti v nanomerilu, a to ni dovolj, da se material razvrsti kot nanostrukturiran. Materiali, ki so razvrščeni kot nanostrukturirani, imajo notranjo ali površinsko strukturo z velikim deležem lastnosti, zrn, praznin ali izločkov v nanomerilu. Izdelki, ki vsebujejo nanogradnike ali nanostrukturirane materiale, niso nujno tudi sami nanostrukturirani materiali.
Ta tehnična specifikacija zajema nanorazpršenost.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 80004-4:2015
01-februar-2015
Nanotehnologije - Slovar - 4. del: Nanostrukturirani materiali (ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-
4:2011)
Nanotechnologien - Fachwörterverzeichnis - Teil 4: Nanostrukturierte Materialien
(ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulaire - Partie 4: Matériaux nanostructurés (ISO/TS 80004-
4:2011)
Ta slovenski standard je istoveten z: CEN ISO/TS 80004-4:2014
ICS:
01.040.07 Naravoslovne in uporabne Natural and applied sciences
vede (Slovarji) (Vocabularies)
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN ISO/TS 80004-4:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
TECHNICAL SPECIFICATION
CEN ISO/TS 80004-4
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2014
ICS 07.030; 01.040.07
English Version
Nanotechnologies - Vocabulary - Part 4: Nanostructured
materials (ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulaire - Partie 4: Matériaux Nanotechnologien - Fachwörterverzeichnis - Teil 4:
nanostructurés (ISO/TS 80004-4:2011) Nanostrukturierte Materialien (ISO/TS 80004-4:2011)
This Technical Specification (CEN/TS) was approved by CEN on 8 December 2014 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 80004-4:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
CEN ISO/TS 80004-4:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
CEN ISO/TS 80004-4:2014 (E)
Foreword
The text of ISO/TS 80004-4:2011 has been prepared by Technical Committee ISO/TC 229
“Nanotechnologies” of the International Organization for Standardization (ISO) and has been taken over as
CEN ISO/TS 80004-4:2014 by Technical Committee CEN/TC 352 “Nanotechnologies” the secretariat of which
is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 80004-4:2011 has been approved by CEN as CEN ISO/TS 80004-4:2014 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 80004-4:2015
TECHNICAL ISO/TS
SPECIFICATION 80004-4
First edition
2011-12-01
Nanotechnologies — Vocabulary —
Part 4:
Nanostructured materials
Nanotechnologies — Vocabulaire —
Partie 4: Matériaux nanostructurés
Reference number
ISO/TS 80004-4:2011(E)
©
ISO 2011
---------------------- Page: 7 -------
...
SLOVENSKI STANDARD
kSIST-TS FprCEN ISO/TS 80004-4:2014
01-november-2014
Nanotehnologije - Slovar - 4. del: Nanostrukturirani materiali (ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-
4:2011)
Nanotechnologien - Fachwörterverzeichnis - Teil 4: Nanostrukturierte Materialien
(ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulaire - Partie 4: Matériaux nanostructurés (ISO/TS 80004-
4:2011)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 80004-4
ICS:
01.040.07 Matematika. Naravoslovne Mathematics. Natural
vede (Slovarji) sciences (Vocabularies)
07.030 Fizika. Kemija Physics. Chemistry
kSIST-TS FprCEN ISO/TS 80004-4:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
TECHNICAL SPECIFICATION
FINAL DRAFT
FprCEN ISO/TS 80004-4
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
August 2014
ICS 07.030; 01.040.07
English Version
Nanotechnologies - Vocabulary - Part 4: Nanostructured
materials (ISO/TS 80004-4:2011)
Nanotechnologies - Vocabulaire - Partie 4: Matériaux Nanotechnologien - Fachwörterverzeichnis - Teil 4:
nanostructurés (ISO/TS 80004-4:2011) Nanostrukturierte Materialien (ISO/TS 80004-4:2011)
This draft Technical Specification is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
352.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN ISO/TS 80004-4:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
FprCEN ISO/TS 80004-4:2014 (E)
Contents
Page
Foreword .3
2
---------------------- Page: 4 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
FprCEN ISO/TS 80004-4:2014 (E)
Foreword
The text of ISO/TS 80004-4:2011 has been prepared by Technical Committee ISO/TC 229
“Nanotechnologies” of the International Organization for Standardization (ISO) and has been taken over as
FprCEN ISO/TS 80004-4:2014 by Technical Committee CEN/TC 352 “Nanotechnologies” the secretariat of
which is held by AFNOR.
This document is currently submitted to the Formal Vote.
Endorsement notice
The text of ISO/TS 80004-4:2011 has been approved by CEN as FprCEN ISO/TS 80004-4:2014 without any
modification.
3
---------------------- Page: 5 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
---------------------- Page: 6 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
TECHNICAL ISO/TS
SPECIFICATION 80004-4
First edition
2011-12-01
Nanotechnologies — Vocabulary —
Part 4:
Nanostructured materials
Nanotechnologies — Vocabulaire —
Partie 4: Matériaux nanostructurés
Reference number
ISO/TS 80004-4:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
ISO/TS 80004-4:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
kSIST-TS FprCEN ISO/TS 80004-4:2014
ISO/TS 80004-4:2011(E)
Foreword
ISO (the International O
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.