SIST EN ISO 6926:2016/oprA1:2020
(Amendment)Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources sonores de référence pour la détermination des niveaux de puissance acoustique - Amendement 1
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/DAM 1:2019)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
SIST EN ISO 6926:2016/oprA1:2020
01-januar-2020
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri
ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/DAM 1:2019)
Acoustics - Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels - Amendment 1
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von
Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources
sonores de référence pour la détermination des niveaux de puissance acoustique -Amendement 1
Ta slovenski standard je istoveten z: EN ISO 6926:2016/prA1
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
SIST EN ISO 6926:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN ISO 6926:2016/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
DRAFT AMENDMENT
ISO 6926:2016/DAM 1
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-10-16 2020-01-08
Acoustics — Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels
AMENDMENT 1
Acoustique — Prescriptions relatives aux performances et à l'étalonnage des sources sonores de référence
pour la détermination des niveaux de puissance acoustiqueAMENDEMENT 1
ICS: 17.140.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 6926:2016/DAM 1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
ISO 6926:2016/DAM 1:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 6926:2016/oprA1:2020
ISO 6926:2016/DAM 1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborate...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.