SIST EN 10348-2:2019
(Main)Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products
Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products
This European Standard specifies requirements for hot-dip galvanized reinforcing steel in the form of products according to EN 10080 and subjected to further processing e.g. bent bars, stirrups, products straightened from coils, products cut from bars, welded structures (other than welded fabric or lattice girders according to prEN 10348 1) and any other components fabricated for use in the reinforcement of concrete.
This European Standard does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.
Stahl für die Bewehrung von Beton - Verzinkter Betonstahl - Teil 2: Verzinkte Bewehrungsstahlerzeugnisse
Diese Europäische Norm legt Anforderungen an verzinkten (feuerverzinkten) Betonstahl in Form von Erzeugnissen nach EN 10080 die zur Weiterverarbeitung bestimmt sind, wie z. B. gebogene Stäbe, Bügel, gerichtete Erzeugnisse, abgelängte Stäbe, geschweißte Profilträger (andere als geschweißte Matten und Gitterträger nach prEN 10138-1) sowie weitere Erzeugnisse die für die Bewehrung von Beton eingesetzt sind, fest.
Diese Europäische Norm gilt nicht für verzinkte (feuerverzinkte) Bewehrungen zum Vorspannen oder Bestandteile für diese Bewehrungen.
Aciers pour béton armé - Aciers pour béton armé galvanisés - Partie 2 : Produits en acier galvanisés pour l'armature du béton
La présente Norme européenne spécifie les prescriptions relatives aux aciers galvanisés pour béton armé sous la forme de produits selon la norme EN 10080 et soumis à une transformation ultérieure par exemple barres cintrées , étriers, produits redressés à partir de couronnes, produits découpés dans des barres, structures soudées (autres que les treillis soudés ou treillis raidisseurs selon le projet de norme EN 10348-1) et tous les autres composants fabriqués pour une utilisation dans l'armature du béton.
La présente Norme européenne ne s’applique pas aux armatures de précontrainte galvanisées ou aux composants de ces armatures.
Jekla za armiranje betona - Pocinkana jekla za armiranje - 2. del: Pocinkana jekla za armiranje izdelkov
Ta evropski standard določa zahteve za vroče pocinkano jeklo za armiranje izdelkov v skladu s standardom EN 10080, ki so namenjeni nadaljnji obdelavi, npr. upognjene palice, stremena, izdelki, izravnani iz navitij, izdelki, izrezani iz palic, varjene konstrukcije (razen varjenih mrež ali rebrastih nosilcev v skladu s standardom prEN 10348-1) in vse druge komponente, ki so izdelane za uporabo pri armiranju betona.
Ta evropski standard se ne uporablja za vroče pocinkana jekla za armiranje za prednapetje ali komponente teh ojačitev.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jekla za armiranje betona - Pocinkana jekla za armiranje - 2. del: Pocinkana jekla za armiranje izdelkovStahl für die Bewehrung von Beton - Verzinkter Betonstahl - Teil 2: Verzinkte BewehrungsstahlerzeugnisseAciers pour béton armé - Aciers pour béton armé galvanisés - Partie 2 : Produits en acier galvanisés pour l'armature du bétonSteel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized reinforcing steel products77.140.15Jekla za armiranje betonaSteels for reinforcement of concreteICS:Ta slovenski standard je istoveten z:EN 10348-2:2018SIST EN 10348-2:2019en,fr,de01-februar-2019SIST EN 10348-2:2019SLOVENSKI
STANDARD
SIST EN 10348-2:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10348-2
December
t r s z ICS
y yä s v rä s w English Version
Steel for the reinforcement of concrete æ Galvanized reinforcing steel æ Part
tã Galvanized reinforcing steel products Aciers pour béton armé æ Aciers pour béton armé galvanisés æ Partie
t ã Produits en acier galvanisés pour l 5armature du béton
Stahl für die Bewehrung von Beton æ Verzinkter Betonstahl æ Teil
tã Verzinkte Bewehrungsstahlerzeugnisse This European Standard was approved by CEN on
{ November
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u v zæ tã t r s z ESIST EN 10348-2:2019
EN 10348-2:2018 (E) 2 Contents Page European foreword . 3 1 Scope . 3 2 Normative references . 4 3 Terms and definitions . 4 4 Symbols . 5 5 Materials . 6 5.1 Reinforcing steel . 6 5.2 Zinc melt . 7 5.3 Repair material . 7 6 Designation. 7 7 Information to be supplied at the time of enquiry and order . 7 8 Galvanizing . 7 8.1 Coating application . 7 8.2 Renovation . 7 9 Performance characteristics .
...
SLOVENSKI STANDARD
oSIST prEN 10348-2:2016
01-september-2016
Jekla za armiranje betona - Pocinkana jekla za armiranje - 2. del: Pocinkana jekla
za armiranje izdelkov
Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 2: Galvanized
reinforcing steel products
Stahl für die Bewehrung von Beton - Verzinkter Betonstahl - Teil 2: Verzinkte
Bewehrungsstahlerzeugnisse
Aciers pour béton armé - Aciers pour béton armé galvanisés - Partie 2 : Produits en acier
galvanisés pour l'armature du béton
Ta slovenski standard je istoveten z: prEN 10348-2
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
oSIST prEN 10348-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10348-2:2016
---------------------- Page: 2 ----------------------
oSIST prEN 10348-2:2016
DRAFT
EUROPEAN STANDARD
prEN 10348-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 77.140.15
English Version
Steel for the reinforcement of concrete - Galvanized
reinforcing steel - Part 2: Galvanized reinforcing steel
products
Stahl für die Bewehrung von Beton - Verzinkter
Betonstahl - Teil 2: Verzinkte Betonstahlerzeugnisse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
ECISS/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10348-2:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10348-2:2016
prEN 10348-2:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols . 5
5 Materials . 5
5.1 Reinforcing steel . 5
5.2 Zinc melt . 6
5.3 Repair material . 6
6 Designation. 6
7 Information to be supplied at the time of enquiry and order .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.