SIST EN 474-3:2007+A1:2009
(Main)Earth-moving machinery - Safety - Part 3: Requirements for loaders
Earth-moving machinery - Safety - Part 3: Requirements for loaders
This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to loaders as defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This part also deals with fork application, single heavy object handling application, object handling application and log handling.
The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006.
This part does not repeat the requirements from EN 474-1:2006, but adds or replaces the requirements for application for loaders.
This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of loaders.
This European Standard is not applicable to loaders manufactured before the date of publication of this European Standard by CEN.
Erdbaumaschinen - Sicherheit - Teil 3: Anforderungen für Lader
Dieser Teil der EN 474 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Lader, wie in EN ISO 6165:2006 definiert, zutreffen, wenn sie bestimmungsgemäß verwendet werden. Die nach vernünftigem Ermessen für den Hersteller vorhersehbare Nutzung der Maschine außerhalb der bestimmungsgemäßen Verwendung ist ebenfalls berücksichtigt (siehe Abschnitt 4).
Dieser Teil behandelt auch den Einsatz mit Gabelzinken, den Einsatz mit schweren Einzellasten, den Hebezeugbetrieb und den Einsatz mit Baumklammer.
Die Anforderungen gelten ergänzend zu den allgemeinen Anforderungen der !EN 474-1:2006+A1:2009".
Dieser Teil wiederholt nicht die Anforderungen der !EN 474-1:2006+A1:2009", aber ergänzt oder ersetzt relevante Anforderungen für Lader.
Dieser Teil beschreibt die geeigneten technischen Maßnahmen, die erforderlich sind, die Risiken, die aufgrund signifikanter Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die während der Inbetriebnahme, des Betriebes, der Instandhaltung von Ladern eintreten können, zu mindern oder zu beseitigen.
Diese Europäische Norm ist nicht auf Lader anzuwenden, die vor der Veröffentlichung dieser Europäischen Norm durch CEN hergestellt wurden.
Engins de terrassement - Sécurité - Partie 3: Prescriptions applicables aux chargeuses
La présente partie de l’EN 474 traite de tous les phénomènes, situations et événements dangereux significatifs
relatifs aux chargeuses définies dans l’EN ISO 6165:2006, lorsqu’elles sont utilisées comme prévu ou dans des
conditions de mauvais usage que le fabricant peut raisonnablement prévoir (voir Article 4).
La présente partie traite également de l’utilisation avec fourches, en manutention de charges unitaires lourdes, en
manutention d’objets et en manutention de grumes.
Les prescriptions figurant dans la présente partie viennent en complément des prescriptions communes présentées
dans l’!EN 474-1:2006+A1:2009".
La présente partie ne répète pas les prescriptions de l’!EN 474-1:2006+A1:2009" mais en ajoute ou en remplace
certaines, applicables aux chargeuses.
La présente partie prescrit les mesures techniques appropriées pour éliminer ou réduire les risques dus aux
phénomènes, situations et événements dangereux significatifs survenant lors de la mise en service, du
fonctionnement et de la maintenance des chargeuses.
La présente Norme européenne n’est pas applicable aux chargeuses fabriquées avant la publication de la présente
Norme européenne par le CEN.
Stroji za zemeljska dela - Varnost - 3. del: Zahteve za nakladalnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 474-3:2007+A1:2009
01-maj-2009
Stroji za zemeljska dela - Varnost - 3. del: Zahteve za nakladalnike
Earth-moving machinery - Safety - Part 3: Requirements for loaders
Erdbaumaschinen - Sicherheit - Teil 3: Anforderungen für Lader
Engins de terrassement - Sécurité - Partie 3: Prescriptions applicables aux chargeuses
Ta slovenski standard je istoveten z: EN 474-3:2006+A1:2009
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-3:2007+A1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 474-3:2007+A1:2009
---------------------- Page: 2 ----------------------
SIST EN 474-3:2007+A1:2009
EUROPEAN STANDARD
EN 474-3:2006+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 53.100 Supersedes EN 474-3:2006
English Version
Earth-moving machinery - Safety - Part 3: Requirements for
loaders
Engins de terrassement - Sécurité - Partie 3: Prescriptions Erdbaumaschinen - Sicherheit - Teil 3: Anforderungen für
applicables aux chargeuses Lader
This European Standard was approved by CEN on 17 April 2006 and includes Amendment 1 approved by CEN on 20 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 474-3:2006+A1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
Contents Page
Foreword .4
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 List of additional significant hazards .8
5 Safety requirements and/or measures .8
5.1 General .8
5.2 Loaders with front access .9
5.3 Operator’s seat .9
5.4 Rear window(s) .9
5.5 Protection .9
5.6 Stability . 11
6 Information for use . 16
Annex A (normative) List of significant additional hazards – Loaders . 17
Annex B (informative) Illustrations . 18
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC . 21
Annex ZB (informative) !!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC"""" . 22
Bibliography . 23
Figures
Figure 1 — Deflection-limiting volume (DLV), front view . 10
Figure 2 — Load centre distance with fork arms . 13
Figure B.1 — Wheel loader . 18
Figure B.2 — Compact wheel loader . 18
Figure B.3 — Skid steer loader . 19
Figure B.4 — Crawler loader . 19
Figure B.5 — Wheel loader with fork arms. 20
Figure B.6 — Wheel loader with grapple . 20
2
---------------------- Page: 4 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
Tables
Table 1 — Stability factors in fork application . 12
Table 2 — Load centre distance . 12
Table 3 — Stability factors in log handling . 13
Table 4 — Stability factors in single heavy object handling in transport mode . 14
Table 5 — Load centre distance . 15
Table A.1 — List of additional significant hazards . 17
3
---------------------- Page: 5 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
Foreword
This document (EN 474-3:2006+A1:2009) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines — Safety”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by December 2009.
This document includes Amendment 1, approved by CEN on 2008-12-20.
This document supersedes !EN 474-3:2006".
The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ".
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
!For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
For bibliographic references, see !EN 474-1:2006+A1:2009".
EN 474 "Earth-moving machinery — Safety" comprises the following parts:
Part 1: General requirements
Part 2: Requirements for tractor-dozers
Part 3: Requirements for loaders
Part 4: Requirements for backhoe-loaders
Part 5: Requirements for hydraulic excavators
Part 6: Requirements for dumpers
Part 7: Requirements for scrapers
Part 8: Requirements for graders
Part 9: Requirements for pipelayers
Part 10: Requirements for trenchers
Part 11: Requirements for earth and landfill compactors
Part 12: Requirements for cable excavators.
This European Standard is intended for use in combination with part 1 of the series.
4
---------------------- Page: 6 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
5
---------------------- Page: 7 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
Introduction
This part of EN 474 is a type C standard as stated in EN ISO 12100-1:2003.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered are
indicated in the scope of this European Standard.
When provisions of this type C standard are different from those which are stated in type A or B standards, the
provisions of this type C standard take precedence over the provisions of the other standards, for machines
that have been designed and built according to the provisions of this type C standard.
6
---------------------- Page: 8 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
1 Scope
This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to loaders as
defined in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are
reasonably foreseeable by the manufacturer (see Clause 4).
This part also deals with fork application, single heavy object handling application, object handling application
and log handling.
The requirements of this part are complementary to the common requirements formulated in !EN 474-
1:2006+A1:2009".
This part does not repeat the requirements from !EN 474-1:2006+A1:2009", but adds or replaces the
requirements for application for loaders.
This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant
hazards, hazardous situations and events during commissioning, operation and maintenance of loaders.
This European Standard is not applicable to loaders manufactured before the date of publication of this
European Standard by CEN.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
!EN 474-1:2006+A1:2009", Earth-moving machinery — Safety — Part 1: General requirements
!EN ISO 2867:2008, Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)"
!EN ISO 3164:2008", Earth-moving machinery — Laboratory evaluations of protective structures —
Specifications for deflecting-limiting volume (ISO 3164:1995)
!EN ISO 3449:2008", Earth-moving machinery — Falling-object protective structures — Laboratory tests
and performance requirements (ISO 3449:2005)
!EN ISO 3457:2008", Earth-moving machinery — Guards — Definitions and requirements (ISO
3457:2003)
!EN ISO 6682:2008", Earth-moving machinery — Zones of comfort and reach for controls (ISO
6682:1986 including Amendment 1:1989)
!EN ISO 7096:2008", Earth-moving machinery — Laboratory evaluation of operator seat vibration
(ISO 7096:2000)
EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology (ISO 12100-1:2003)
ISO 2330:2002, Fork-lift trucks — Fork arms — Technical characteristics and testing
!ISO 6016:2008", Earth-moving machinery — Methods of measuring the masses of whole machines,
their equipment and components
ISO 7546:1983, Earth-moving machinery — Loader and front loading excavator buckets — Volumetric ratings
7
---------------------- Page: 9 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
!ISO 14397-1:2007", Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of
rated operating capacity and test method for verifying calculated tipping load
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in !EN 474-
1:2006+A1:2009", EN ISO 12100-1:2003 and the following apply.
Terminology for loaders is specified in ISO 7131:1997 and the most common loaders are illustrated in
Annex B of this European Standard.
NOTE Definitions used in EN and ISO standards referred to in this European Standard are also valid for this
document.
3.1
loader
self-propelled crawler or wheeled machine, having a front-mounted equipment primarily designed for loading
operation (bucket use), which loads or excavates through forward motion of the machine
NOTE 1 A loader work cycle normally comprises filling, elevating, transporting and discharging material.
NOTE 2 Derivative machinery; loaders can also be used for derivative application (see !EN 474-1:2006+A1:2009",
3.1.2).
3.2
compact loader
loader with an operating mass (see !ISO 6016:2008") of 4 500 kg or less, designed to work in confined
spaces with the associated needs for greater manoeuvrability
3.3
skid steer loader
loader normally having an operator's station between attachment-supporting structures and steered by using
variation of speed and/or direction of rotation between traction drives on opposite sides of a machine with
fixed axles
3.4
swing loader
loader having a swing type lift arm with a swinging angle to the left and right from a straight position
NOTE A swing loader work cycle is normally similar to a loader cycle but additionally work can be done offset of the
machine track.
4 List of additional significant hazards
See Annex A.
NOTE Annex A (normative) contains all the significant hazards, hazardous situations and events, as far as they are
dealt with in this European Standard, identified by risk assessment as significant for this type of machinery and which
require action to eliminate or reduce the risk.
5 Safety requirements and/or measures
5.1 General
Loaders shall comply with the requirements of !EN 474-1:2006+A1:2009", as far as not modified or
replaced by the requirements of this part.
8
---------------------- Page: 10 ----------------------
SIST EN 474-3:2007+A1:2009
EN 474-3:2006+A1:2009 (E)
5.2 Loaders with front access
5.2.1 General
For loaders with front access the reference to !EN ISO 2867:2008" applies with the deviations given in
5.2.2 and 5.2.3.
5.2.2 Primary access opening
The primary opening shall not be less than:
opening height 875 mm;
opening width 550 mm.
5.2.3 Alternative egress opening (emergency exit)
An alternative opening shall be provided.
Minimum dimension of the emergency exit shall comply with !11.2 b) of EN ISO 2867:2008".
5.3 Operator’s seat
!EN 474-1:2006+A1:2009", 5.4.1 applies with the addition that the seat shall meet the requirements of
the following input spectral class according to !EN ISO 7096:2008":
EM3 for wheel loaders greater than 4 500 kg;
EM6 for crawler loaders;
EM8 for compact wheel loaders less or equal than 4 500 kg;
EM9 for skid steer loaders.
5.4 Rear window(s)
The requirements of !EN 474-1:2006+A1:2009", 5.3.2.7 and 5.3.2.9 for the rear window(s) apply, with the
exception that no motorized wiper(s) and washers are required for loaders with a cab width less than or equal
to 750 mm measured outside of t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.