oSIST prEN 16662-3:2023

Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3: Production control (self monitoring) and third-party surveillance

This document specifies the control of the production (either self monitoring or by a third-party), which is a common part for every manufacturer of every kind of supplementary grip device (SGD).

Straßenfahrzeuge - Zusätzliche Gleitschutzvorrichtungen für Reifen an Personenfahrzeugen und leichten Nutzfahrzeugen - Teil 3: (selbst überwachte) Produktionskontrolle und Überwachung von Drittanbieterseite

Véhicules routiers - Dispositifs supplémentaires d'adhérence pour pneumatiques de véhicules particuliers et de véhicules utilitaires légers - Partie 3 : Contrôle de la production (autosurveillance) et surveillance par un tiers

Cestna vozila - Dodatne naprave za oprijem pnevmatik na osebnih in lahkih tovornih vozilih - 3. del: Nadzor proizvodnje (samokontrola) in nadzor tretjih oseb

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Nov-2023
• ICS: 83.160.10 - Road vehicle tyres
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 15-Sep-2023
• Due Date: 02-Feb-2024
• Ref Project: prEN 16662-3 - Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3: Production control (self monitoring) and third-party surveillance

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16662-3:2023
01-november-2023
Cestna vozila - Dodatne naprave za oprijem pnevmatik na osebnih in lahkih
tovornih vozilih - 3. del: Nadzor proizvodnje (samokontrola) in nadzor tretjih oseb
Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty
vehicles - Part 3: Production control (self monitoring) and third-party surveillance
Straßenfahrzeuge - Zusätzliche Gleitschutzvorrichtungen für Reifen an
Personenfahrzeugen und leichten Nutzfahrzeugen - Teil 3: (selbst überwachte)
Produktionskontrolle und Überwachung von Drittanbieterseite
Véhicules routiers - Dispositifs supplémentaires d'adhérence pour pneumatiques de
véhicules particuliers et de véhicules utilitaires légers - Partie 3 : Contrôle de la
production (autosurveillance) et surveillance par un tiers
Ta slovenski standard je istoveten z: prEN 16662-3
ICS:
83.160.10 Pnevmatike za cestna vozila Road vehicle tyres
oSIST prEN 16662-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16662-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN 16662-3:2023


DRAFT
EUROPEAN STANDARD
prEN 16662-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2023
ICS 83.160.10
English Version

Road vehicles - Supplementary grip devices for tyres of
passenger cars and light duty vehicles - Part 3: Production
control (self monitoring) and third-party surveillance
Véhicules routiers - Dispositifs supplémentaires Straßenfahrzeuge - Zusätzliche
d'adhérence pour pneumatiques de véhicules Gleitschutzvorrichtungen für Reifen an
particuliers et de véhicules utilitaires légers - Partie 3 : Personenfahrzeugen und leichten Nutzfahrzeugen -
Contrôle de la production (autosurveillance) et Teil 3: (selbst überwachte) Produktionskontrolle und
surveillance par un tiers Überwachung von Drittanbieterseite
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 301.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16662-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16662-3:2023
prEN 16662-3:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General audit and quality system requirements . 4
4.1 General. 4
4.2 Description of the procedure. 4
4.3 Initial test re
...