Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite

This European Standard specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipment (RSE) to EN 15509 in accordance with the test suite structure and test purposes defined in EN 15876-1:2016.
The objective of the present document is to provide a basis for conformance tests for DSRC equipment (OBE and RSE) to support interoperability between different equipment supplied by different manufacturers.

Elektronische Gebührenerhebung - Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN 15509 - Teil 2: Zusammengefasstes Prüfprogramm

Perception de télépéage - Evaluation de conformité de l'équipement embarqué et de l'équipement au sol à l'EN 15509 - Partie 2 : Suite d'essais abstraite

La présente Norme européenne spécifie la suite d'essais abstraite (ATS) visant à évaluer la conformité des équipements embarqués (OBE) ainsi que des équipements d'infrastructures routières (RSE) par rapport à l'EN 15509 conformément à la structure de la suite d'essais et aux intentions d'essai définies dans l'EN 15876-1:2016.
Le but du présent document est de fournir une base pour les essais de conformité des équipements DSRC (OBE et RSE) afin de permettre l'interopérabilité entre les différents équipements fournis par différents constructeurs.

Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in v obcestni napravi s standardom EN 15509 - 2. del: Abstraktni preskuševalni niz

Ta evropski standard določa abstraktni preskuševalni niz (ATS) za vrednotenje skladnosti opreme v vozilu (OBE) in obcestnih napravah (RSE) v skladu s standardom EN 15509 skladno z zgradbo preskuševalnega niza in namenom preskušanja, kot je opredeljeno v standardu EN 15876-1:2016.
Namen tega dokumenta je zagotoviti podlago za preskuse skladnosti za opremo DSRC (oprema v vozilu in obcestnih napravah) za zagotavljanje interoperabilnosti različne opreme različnih proizvajalcev.

General Information

Status
Published
Public Enquiry End Date
21-Apr-2016
Publication Date
13-Mar-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Nov-2016
Due Date
08-Jan-2017
Completion Date
14-Mar-2017

Relations

Buy Standard

Standard
EN 15876-2:2017
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in v obcestni napravi s standardom EN 15509 - 2. del: Abstraktni preskuševalni nizElektronische Gebührenerhebung - Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN 15509 - Teil 2: Zusammengefasstes PrüfprogrammPerception de télépéage - Evaluation de conformité de l'équipement embarqué et de l'équipement au sol à l'EN 15509 - Partie 2 : Suite d'essais abstraiteElectronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite43.040.15Car informatics. On board computer systems35.240.60Uporabniške rešitve IT v prometuIT applications in transport03.220.20Cestni transportRoad transportICS:Ta slovenski standard je istoveten z:EN 15876-2:2016SIST EN 15876-2:2017en,fr,de01-april-2017SIST EN 15876-2:2017SLOVENSKI
STANDARDSIST EN 15876-2:20111DGRPHãþD



SIST EN 15876-2:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15876-2
October
t r s x ICS
u wä t v rä x r Supersedes EN
s w z y xæ tã t r s sEnglish Version
Electronic fee collection æ Evaluation of onæboard and roadside equipment for conformity to EN
s w w r { æ Part
tã Abstract test suite Perception de tßlßpßage æ Evaluation de conformitß de l 5ßquipement embarquß et de l 5ßquipement au sol à l 5EN
s w w r { æ Partie
tã Suite d 5essais abstraite
Elektronische Gebührenerhebung æ Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN
s w w r { æ Teil
tã Zusammengefasstes Prüfprogramm This European Standard was approved by CEN on
w September
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w z y xæ tã t r s x ESIST EN 15876-2:2017



EN 15876-2:2016 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Abbreviations . 7 5 Abstract Test Method (ATM) . 8 5.1 General . 8 5.2 Test architecture . 8 6 Untestable Test Purposes (TP) . 9 7 Abstract test suite (ATS) conventions . 10 7.1 General . 10 7.2 Naming conventions . 10 7.2.1 Declarations part. 10 7.2.2 Constraints part . 12 7.2.3 Dynamic part . 12 7.3 Implementation conventions . 13 7.3.1 Declaration part . 13 7.3.2 Constraint part . 13 7.3.3 Dynamic part . 13 Annex A (normative)
Abstract Test Suite (ATS) for On-Board Equipment . 14 A.1 Introduction . 14 A.2 TTCN Graphical form (TTCN.GR) . 14 A.3 TTCN Machine Processable form (TTCN.MP) . 14 Annex B (normative)
Abstract Test Suite (ATS) for Roadside Equipment . 15 B.1 Introduction . 15 B.2 TTCN Graphical form (TTCN.GR) . 15 B.3 TTCN Machine Processable form (TTCN.MP) . 15 Annex C (normative)
Partial PIXIT Proforma for On-Board Equipment . 16 C.1 Introduction . 16 C.2 Identification summary . 16 C.3 ATS summary . 16 C.4 Test laboratory . 16 C.5 Client identification . 16 C.6 DUT . 17 C.7 Protocol layer information . 17 SIST EN 15876-2:2017



EN 15876-2:2016 (E) 3 C.7.1 Protocol identification . 17 C.7.2 DUT information . 17 Annex D (normative)
Partial PIXIT Proforma for Roadside Equipment . 18 D.1 Introduction. 18 D.2 Identification summary . 18 D.3 ATS summary . 18 D.4 Test laboratory . 18 D.5 Client identification . 18 D.6 DUT . 19 D.7 Protocol layer information . 19 D.7.1 Protocol identification . 19 D.7.2 DUT information . 19 Bibliography . 20
SIST EN 15876-2:2017



EN 15876-2:2016 (E) 4 European foreword This document (EN 15876-2:2016) has been prepared by Technical Committee CEN/TC 278 “Intelligent Transport Systems”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document supersedes EN 15876-2:2011. This edition incorporates the following main technical changes compared to the previous version: — amendments to reflect changes to the underlying "requirements standard" (i.e. EN 15509:2014), notably the amended definition of vehicle licence plate number; — amendments of terms, in order to reflect the harmonization of terms across electronic fee collection (EFC) standards. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15876-2:2017



EN 15876-2:2016 (E) 5 Introduction CEN/TC 278 (WG 1) has produced a set of standards that support interoperable DSRC-EFC-systems (e.g. EN ISO 14906), a “toolbox” for defining EFC-application transaction, and CEN ISO/TS 14907-2 (EFC conformance test for the on-board unit application interface). However, these standards are only of an enabling nature and do not guarantee unambiguous technical interoperability. Therefore the standard profile Electronic fee collection – Interoperable application profile for DSRC (EN 15509) was developed to support technical interoperability between EFC-systems. This document forms Part 2 of a two-part European Standard: 1 EN 15876-1, -board and roadside equipment for conformity to EN 15509
2 EN 15876-2, Evaluation of on-board and roadside equipment for conformity to EN 15509
Part 1 of the standard defines the test suite structure and the test purposes for conformity evaluation of OBEs and RSE designed for compliance with the requirements set in EN 15509. A test standard for evaluation of conformity of on-board and roadside equipment is a necessary element for coherent, practical and effective appraisal of products' compliance to EN 15509. Part 2 of the European Standard (this standard) provides the Abstract Test Suite (ATS), which are translations of the "human-readable" TSS&TP suite into Tree and Tabular Combined Notation (TTCN). The ATS is based on the TTCN test script language that is suitable for implementation in computer-aided test tools and for specification of test cases and steps for assessment of protocol and application behaviour. TTCN is a widespread dedicated test programming language for compliance testing and is standardized in ISO/IEC 9646-3. The TTCN language is supported by modern automated tools that accelerate software design, implementation and testing. Together, the two parts of EN 15876 provide the necessary foundation for implementation of the interoperability requirements as stated in EN 15509: — industry is provided with an easy-to-use toolbox for product assessment; — operators can easily assess conformity to EN 15509 and reference to the standard in tendering processes; — authorities and joint undertakings may reference to the test standard when stating interoperability requirements; — certification organisations are given an effective tool for certification of products. This part of EN 15876 is based on: — EN 15509:2014, — the set of dedicated short range communication (DSRC) standards defining the communication stack, and — ISO/IEC 9646. SIST EN 15876-2:2017



EN 15876-2:2016 (E) 6 1 Scope This European Standard specifies the abstract test suite (ATS) to evaluate the conformity of on-board equipment (OBE) and roadside equipment (RSE) to EN 15509 in accordance with the test suite structure and test purposes defined in EN 15876-1:2016. The objective of the present document is to provide a basis for conformance tests for DSRC equipment (OBE and RSE) to support interoperability between different equipment supplied by different manufacturers. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ETSI/TS 102 486-2-3, V1.2.1 (2008-10), Electromagnetic compatibility and Radio spectrum Matters
xã DSRC application layerâ Sub-Part
yã Abstract Test
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 attribute addressable package of data consisting of a single data element or structured sequences of data elements [ISO 17575-1:2016, 3.1] 3.2 authenticator data, possibly encrypted, that is used for authentication [EN 15509:2014, 3.3] 3.3 data group collection of closely related attributes [ISO 17575-1:2016, 3.10] 3.4 element DSRC directory containing application information in form of attributes [ISO 14906:2011, 3.11] 3.5 implementation conformance statement statement of capabilities and options that have been implemented defining to what extent it is compliant with a given specification SIST EN 15876-2:2017



EN 15876-2:2016 (E) 7 3.6 implementation conformance statement proforma document, in the form of a questionnaire, which when completed for an implementation or system becomes an implementation conformance statement (ICS) [ISO/IEC 9646-1:1994, 3.3.40] 3.7 implementation extra information for testing statement containing all of the information related to the implementation under test (IUT) and its corresponding system under test (SUT) which will enable the testing laboratory to run an appropriate test suite against that IUT [SOURCE: ISO 19105:2000, 3.20] 3.8 implementation extra information for testing proforma document, in the form of a questionnaire, which when completed for an implementation under test (IUT) becomes an implementation extra information for testing (IXIT) [SOURCE: ISO/IEC 9646-1:1994, 3.3.42, modified] 3.9 on-board equipment all required equipment on-board a vehicle for performing required EFC functions and communication services 3.10 roadside equipment equipment located along the road, either fixed or mobile [SOURCE: EN ISO 14906:2011, 3.17] 3.11 tester combination of equipment, humans and processes able to perform specified conformance tests [EN 15876-1:2016, 3.12] 3.12 transaction whole of the exchange of information between two physically separated communication facilities [ISO 17575-1:2016, 3.21] 4 Abbreviations For the purpose of this document, the following abbreviations apply throughout the document unless otherwise specified. ADU Application Data Unit (ISO 14906) APDU Application Protocol Data Unit (ISO 14906) AP Application Process (ISO 14906) SIST EN 15876-2:2017



EN 15876-2:2016 (E) 8 ASN.1 Abstract Syntax Notation One (ISO/IEC 8824-1) ASP Application Service Point ATS Abstract Test Suite BI Beviour Invalid (i.e. Invalid Behaviour tests) B-Kernel Broadcast Kernel BST Beacon Service Table (ISO 14906) BV Behaviour Valid (i.e. Valid Behaviour tests) cf Confirm (ISO 14906) CM Co-ordination Message DLC Data Link Control DSRC Dedicated Short-Range communication (ISO 14906) DUT Device Under Test (CEN ISO/TS 14907-2) EID Element Identifier (ISO 14906) EFC Electronic Fee Collection (ISO 17573) EVENT-RT EVENT-REPORT (EN 12834) ICS Implementation Conformance Statement (EN 15509) IUT Implementation Under Test (ISO/TS 14907-1) IXIT Implementation eXtra Information for Testing (CEN ISO/TS 14907-2) LLC Logical Link Control (EN 12795) MAC Medium Access Control (EN 12795) OBE On-board equipment OBU On-board unit PDU Protocol Data Unit (ISO 14906) RSE Road-side equipment TC Test Case TP Test Purpose TSS Test Suite Structure (EN 15876-1) VST Vehicle Service Table (ISO 14906) 5 Abstract Test Method (ATM) 5.1 General This clause describes the abstract test method (ATM) used to test the layers at the OBE side and at the RSE side. 5.2 Test architecture ETSI/TS 102 486-1-3:2009, Clause 4 and ETSI/TS 102 486-2-3:2009, Clause 4 describe the test architecture for their respective layers for testing. As test purposes (TPs) from ETSI/TS 102 486-1-3 SIST EN 15876-2:2017



EN 15876-2:2016 (E) 9 and ETSI/TS 102 486-2-3 are referenced to in EN 15876-1, the test architectures presented there are also relevant for the corresponding test cases (TCs). For all specific TPs introduced in EN 15876-1, the test architecture defined in ETSI/TS 102 486-2-3 is relevant too. 6 Untestable Test Purposes (TP) This clause gives a list of TPs, which are not implemented in the abstract test suite (ATS) due to the chosen abstract test method (ATM) or other restrictions. NOTE The abbreviation OBU, rather tha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.