SIST EN ISO/IEC 80079-20-2:2016/AC:2018

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

2017-07-03 - Endorsement of ISO corrigendum including corrigendum content for the EN ISO version! TAN & SV collaboration

Explosionsfähige Atmosphären - Teil 20-2: Werkstoffeigenschaften - Prüfverfahren für brennbare Stäube - Technische Korrektur 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

Atmosphères explosives - Partie 20-2: Caractéristiques des produits - Méthodes d’essai des poussières combustibles - Rectificatif technique 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

Eksplozivne atmosfere - 20-2. del: Lastnosti materiala - Metode preskušanja gorljivega prahu - Tehnični popravek 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

General Information

• Status: Published
• Publication Date: 09-Jan-2018
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 13.230 - Explosion protection
• Technical Committee: EXP - Electrical apparatus for explosive atmospheres
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Oct-2017
• Due Date: 28-Dec-2017
• Completion Date: 10-Jan-2018
• Directive: 2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
• Ref Project: EN ISO/IEC 80079-20-2:2016/AC:2017 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

Relations

• Corrects: SIST EN ISO/IEC 80079-20-2:2016 - Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016)
• Effective Date: 22-Mar-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHVNXãDQMDExplosionsfähige Atmosphären - Teil 20-2: Werkstoffeigenschaften - Prüfverfahren für brennbare Stäube - Technische Korrektur 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)Atmosphères explosives - Partie 20-2: Caractéristiques des produits - Méthodes d’essai des poussières combustibles - Rectificatif technique 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)13.230Varstvo pred eksplozijoExplosion protection13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN ISO/IEC 80079-20-2:2016/AC:2017SIST EN ISO/IEC 80079-20-2:2016/AC:2018en,fr01-februar-2018SIST EN ISO/IEC 80079-20-2:2016/AC:2018SLOVENSKI
STANDARD



SIST EN ISO/IEC 80079-20-2:2016/AC:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO/IEC 80079-20-2:2016/AC
October 2017
Octobre 2017
Oktober 2017 ICS 29.260.20 English version
Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)
Atmosphères explosives - Partie 20-2: Caractéristiques des produits - Méthodes d'essai des poussières combustibles - Rectificatif technique 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)
Explosionsfähige Atmosphären - Teil 20-2: Werkstoffeigenschaften - Prüfverfahren für brennbare Stäube - Technische Korrektur 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017) This corrigendum becomes effective on 11 October 2017 for incorporation in the official English version of the EN.
Ce corrigendum prendra effet le 11 octobre 2017 pour incorporation dans la version anglaise officielle de la EN.
Die Berichtigung tritt am 11. Oktober 2017 zur Einarbeitung in die offizielle Englische Fassung der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN ISO/IEC 80079-20-2:2016/AC:2017 E SIST EN ISO/IEC 80079-20-2:2016/AC:2018



EN ISO/IEC 80079-20-2:2016/AC:2017 (E) 2 Contents
Page European foreword . 3 1 Modifications to the European Foreword . 4 2 Modification to Annex ZA . 4 3 Modifications to Annex ZB . 5 SIST EN ISO/IEC 80079-20-2:2016/AC:2018



EN ISO/IEC 80079-20-2:2016/AC:2017 (E) 3
European foreword The text of ISO/IEC 80079-20-2:2016/Cor 1:2017 has been prepared by Technical Committee ISO/TMBG “Technical Management Board - groups” of the International Organization for Standardization (ISO) and has been taken over as EN ISO/IEC 80079-20-2:2016/AC:2017 by Technical Committee CEN/TC 305 “Potentially explosive atmospheres - Explosion prevention and protection” the secretariat of which is held by DIN. Endorsement notice The text of ISO/IEC 80079-20-2:2016/Cor 1:2017 has been approved by CEN as EN ISO/IEC 80079-20-2:2016/AC:2017 without any modification. SIST EN ISO/IEC 80079-20-2:2016/AC:2018



EN ISO/IEC 80079-20-2:2016/AC:2017 (E) 4 1 Modifications to the European Foreword Replace the third paragraph with: "The significant changes with respect to EN 13821:2002 and EN 61241-2-2:1995 are included in Annex ZB “Significant changes with respect to EN 13821:2002, IEC 61241-2-1:1994, EN 61241-2-2:1993 and IEC 61241-2-3:1994"." Replace the fourth paragraph with: "This document supersedes EN 13821:2002 and EN 61241-2-2:1995." 2 Modification to Annex ZA Replace Annex ZA with the following annex: " SIST EN ISO/IEC 80079-20-2:2016/AC:2018



EN ISO/IEC 80079-20-2:2016/AC:2017 (E) 5 Annex ZA (informative)
Relationship between this European Standard and the essential requirements of Directive 2014/34/EU aimed to be covered This European Standard has been prepared under a Commission’s standardization request M/BC/CEN/92/46 to provide one voluntary means of conforming to essential requirements of Directive 2014/34/EU "Directive 2014/34/EU of The European Parliament and of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)". Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZA.1 — Correspondence between this European Standard and Directive 2014/34/EU Essential requirements of Directive 2014/34/EU Clause(s)/sub-clause(s) of this EN Remarks/Notes Annex II, Clause 1.01; 1.0.6a; 1.0.6b; 1.2.1; 1.2.4; 1.5.7 5, 6, Annex G
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of this standard." 3 Modifications to Annex ZB Replace the title of Annex ZB by the following: "Significant changes with respect to EN 13821:2002, IEC 61241-2-1:1994, EN 61241-2-2:1993 and IEC 61241-2-3:1994" Replace the first sentence by the following: "This European Standard supersedes EN 13821:2002, IEC 61241-2-1:1994, EN 61241-2-2:1993 and IEC 61241-2-3:1994." Replace the table title by the following: "Significant changes with respect to EN 13821:2002, IEC 61241-2-1:1994, EN 61241-2-2:1993 and IEC 61241-2-3:1994" SIST EN ISO/IEC 80079-20-2:2016/AC:2018



SIST EN ISO/IEC 80079-20-2:2016/AC:2018



ISO/IEC 80079-20-2:2016/COR1:2017 – 1 –
 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
ISO/IEC 80079-20-2 Edition 1.0
2016-02
EXPLOSIVE ATMOSPHERES –
Part 20-2: Material characteristics – Combustible dusts test methods ISO/IEC 80079-20-2 Edition 1.0
2016-02
ATMOSPHERES EXPLOSIVES –
Partie 20-2: Caractéristiques des produits – Méthodes d'essai des poussières combustibles
CORRIGENDUM 1
Corrections to the French version appear after the English
...