SIST EN 15815:2011
(Main)Polymer modified bituminous thick coatings - Resistance to compression
Polymer modified bituminous thick coatings - Resistance to compression
This European Standard specifies a procedure for determining the resistance to compression of polymer modified bituminous thick coatings for waterproofing.
Kunststoffmodifizierte Bitumendickbeschichtungen - Beständigkeit gegen Stauchung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Beständigkeit gegen Stauchung von polymermodifizierten Bitumendickbeschichtungen zur Bauwerksabdichtung fest.
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Résistance à la compression
La présente Norme européenne spécifie une méthode permettant de déterminer la résistance à la compression des revêtements bitumineux épais modifiés aux polymères pour imperméabilisation.
Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Odpornost proti tlaku
Ta evropski standard določa postopek za določanje odpornosti bitumenskih debeloslojnih prevlek za tesnjenje, modificiranih s polimeri, proti tlaku, da se zagotovi hidroizolacija.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske debeloslojne prevleke za tesnjenje, modificirane s polimeri - Odpornost proti tlakuKunststoffmodifizierte Bitumendickbeschichtungen - Beständigkeit gegen StauchungPolymer modified bituminous thick coatings - Resistance to compression91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15815:2011SIST EN 15815:2011en,fr,de01-junij-2011SIST EN 15815:2011SLOVENSKI
STANDARD
SIST EN 15815:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15815
March 2011 ICS 91.100.50 English Version
Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Résistance à la compression
Kunststoffmodifizierte Bitumendickbeschichtungen zur Bauwerksabdichtung - Beständigkeit gegen Stauchung This European Standard was approved by CEN on 13 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15815:2011: ESIST EN 15815:2011
EN 15815:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .46Test specimens .46.1General .46.2Preparation .56.3Dimensions of the test specimens.56.4Conditioning of test specimens .57Procedure .57.1Test conditions .57.2Procedure .58Expression of results and precision .68.1Expression of results .68.2Precision .69Test report .7 SIST EN 15815:2011
EN 15815:2011 (E) 3 Foreword This document (EN 15815:2011) has been prepared by Technical Committee CEN/TC 361 “Project Committee — Polymer modified bituminous thick coatings for waterproofing — Definitions/requirements and test methods”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 15815:2011
EN 15815:2011 (E) 4
1 Scope This European Standard specifies a procedure for determining the resistance to compression of polymer modified bituminous thick coatings for waterproofing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.