SIST-TP CLC IEC/TR 62453-52-32:2019

Field device tool (FDT) interface specification - Part 52-32: Communication implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (IEC/TR 62453-52-32:2017)

This part of the IEC 62453-52-xy series, which is a Technical Report, provides information for integrating the PROFINET®1 technology into the CLI-based implementation of FDT interface specification (IEC TR 62453-42).
This part of IEC 62453 specifies implementation of communication and other services based on IEC 62453-303-2.
This document neither contains the FDT specification nor modifies it.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-32: Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur - Kommunikationsprofilfamilie (CPF) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC/TR 62453-52-32:2017)

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-32: Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage - CP 3/4, CP 3/5 et CP 3/6 de l’ IEC 61784 (IEC/TR 62453-52-32:2017)

Specifikacija vmesnika orodja procesne naprave - 52-32. del: Implementacija komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/4, CP 3/5 in CP 3/6 (IEC/TR 62453-52-32:2017)

Ta del skupine standardov IEC 62453-52-xy je tehnično poročilo, ki podaja informacije za integracijo tehnologije PROFINET®1 v implementacijo (na osnovi skupne jezikovne infrastrukture (CLI)) specifikacije vmesnika orodja procesne naprave (FDT) (IEC TR 62453-42).
Ta del standarda IEC 62453 določa implementacijo komunikacijskih in drugih storitev, ki temeljijo na standardu IEC 62453-303-2.
Ta dokument ne vsebuje specifikacije orodja procesne naprave niti je ne spreminja.

General Information

• Status: Published
• Publication Date: 27-Mar-2019
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Feb-2019
• Due Date: 28-Apr-2019
• Completion Date: 28-Mar-2019
• Ref Project: CLC IEC/TR 62453-52-32:2019 - Field device tool (FDT) interface specification - Part 52-32: Communication implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CLC IEC/TR 62453-52-32:2019
01-junij-2019
Specifikacija vmesnika orodja procesne naprave - 52-32. del: Implementacija
komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/4, CP 3/5 in CP
3/6 (IEC/TR 62453-52-32:2017)
Field device tool (FDT) interface specification - Part 52-32: Communication
implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP
3/6 (IEC/TR 62453-52-32:2017)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-32:
Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur -
Kommunikationsprofilfamilie (CPF) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC/TR 62453-52-
32:2017)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-32:
Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage -
CP 3/4, CP 3/5 et CP 3/6 de l’ IEC 61784 (IEC/TR 62453-52-32:2017)
Ta slovenski standard je istoveten z: CLC IEC/TR 62453-52-32:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CLC IEC/TR 62453-52-32:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019

---------------------- Page: 2 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019


TECHNICAL REPORT CLC IEC/TR 62453-52-32

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
February 2019
ICS 25.040.40; 35.100.05; 35.110

English Version
Field device tool (FDT) interface specification - Part 52-32:
Communication implementation for common language
infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
(IEC/TR 62453-52-32:2017)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 52-32: Mise en œuvre d’un profil de 52-32: Kommunikationsimplementierung mit der
communication pour l’infrastructure commune de langage - allgemeinen Sprachinfrastruktur -
CP 3/4, CP 3/5 et CP 3/6 de l’ IEC 61784 Kommunikationsprofilfamilie (CPF) 3/4, 3/5 und 3/6 nach
(IEC/TR 62453-52-32:2017) IEC 61784
(IEC/TR 62453-52-32:2017)


This Technical Report was approved by CENELEC on 2019-01-14.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC IEC/TR 62453-52-32:2019 E

---------------------- Page: 3 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
CLC IEC/TR 62453-52-32:2019 (E)
European foreword
This document (CLC IEC/TR 62453-52-32:2019) consists of the text of IEC/TR 62453-52-32:2017
prepared by SC 65E "Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process
measurement, control and automation.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC/TR 62453-52-32:2017 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
CLC IEC/TR 62453-52-32:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61131-3 2013 Programmable controllers - Part 3: EN 61131-3 2013
Programming languages
IEC 61158-6-10 -  Industrial communication networks - EN 61158-6-10 -
Fieldbus specifications - Part 6-10:
Application layer protocol specification -
Type 10 elements
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61784-1 2014 Industrial communication networks - EN 61784-1 2014
Profiles - Part 1: Fieldbus profiles
IEC 62453-1 2016 Field device tool (FDT) interface EN 62453-1 2017
specification - Part 1: Overview and
guidance
IEC 62453-2 2016 Field device tool (FDT) interface EN 62453-2 2017
specification - Part 2: Concepts and
detailed description
IEC TR 62453-42 2016 Field device tool (FDT) interface - -
specification - Part 42: Object model
integration profile - Common language
infrastructure
IEC 62453-303-2 2009 Field device tool (FDT) interface EN 62453-303-2 2009
specification - Part 303-2: Communication
profile integration - IEC 61784 CP 3/4, CP
3/5 and CP 3/6



3

---------------------- Page: 5 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019

---------------------- Page: 6 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019




IEC TR 62453-52-32

®


Edition 1.0 2017-06




TECHNICAL



REPORT








colour

inside










Field device tool (FDT) interface specification –

Part 52-32: Communication implementation for common language

infrastructure – IEC 61784 CP 3/4, CP 3/5 and CP 3/6


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-4331-2




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
– 2 – IEC TR 62453-52-32:2017 © IEC 2017
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Terms and definitions. 9
3.2 Abbreviations . 9
3.3 Conventions . 9
3.3.1 Datatype names and references to datatypes . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus Category . 9
5 Access to instance and device data . 9
5.1 General . 9
5.2 IO signals provided by DTM . 10
5.3 Data interfaces . 10
5.3.1 General . 10
5.3.2 Mapping PROFINET datatypes to FDT datatypes . 10
5.3.3 SemanticInfo . 11
6 Protocol specific behavior . 12
6.1 PROFINET device model . 12
6.2 Configuration and parameterization of PROFINET devices . 13
6.3 PROFINET – related information of a Device DTM . 13
6.4 Remarks on FDT 1.2 / 2 Compatibility . 14
7 Protocol specific usage of general FDT datatypes . 14
8 Protocol specific common datatype: PnDeviceAddress . 14
9 Network management . 15
9.1 General . 15
9.2 Configuration . 16
9.3 Process Data Items . 28
9.4 Parameterization . 28
10 Communication datatypes. 28
10.1 General . 28
10.2 ConnectRequest and ConnectResponse Services . 28
10.2.1 PnConnectRequest Service . 28
10.2.2 PnConnectResponse Service. 29
10.3 DisconnectRequest and DisconnectResponse Services . 30
10.3.1 PnDisconnectRequest Service . 30
10.3.2 PnDisconnectResponse Service . 31
10.4 TransactionRequest and TransactionResponse Services . 32
10.4.1 PnReadRequest Service . 32
10.4.2 PnReadResponse Service . 33
10.4.3 PnWriteRequest Service . 35
10.4.4 PnWriteResponse Service . 36
10.4.5 PnCancelRequest Service . 37
10.4.6 PnCancelResponse Service . 38

---------------------- Page: 8 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
IEC TR 62453-52-32:2017 © IEC 2017 – 3 –
10.5 SubscribeRequest and SubscribeResponse Service . 39
10.5.1 PnSubscribeRequest . 39
10.5.2 PnSubscribeResponse . 40
10.6 UnsubscribeRequest and UnsubscribeResponse Service . 41
10.6.1 PnUnsubscribeRequest Service . 41
10.6.2 PnUnsubscribeResponse Service . 41
10.7 AbortMessage Service . 42
10.8 PnResponseError . 42
10.8.1 Communication error . 42
10.8.2 Handling of errors during Connect and Disconnect . 43
11 Datatypes for process data information . 43
11.1 General . 43
11.2 PnIOSignalInfo. 43
11.3 Mapping of PROFINET datatypes to FDT datatypes . 45
12 Device identification . 45
12.1 General . 45
12.2 PnDeviceScanInfo datatype . 45
12.3 PnDeviceIdentInfo datatype . 49
Bibliography . 51

Figure 1 – Part 52-32 of the IEC 62453 series . 7
Figure 2 – PROFINET Device Model . 13
Figure 3 – PROFINET Device Address . 15
Figure 4 – PROFINET Network Data . 16
Figure 5 – PnConnectRequest . 29
Figure 6 – PnConnectResponse . 30
Figure 7 – PnDisconnectRequest . 31
Figure 8 – PnDisconnectResponse . 32
Figure 9 – PnReadRequest . 33
Figure 10 – PnReadResponse . 34
Figure 11 – PnWriteRequest . 36
Figure 12 – PnWriteResponse . 37
Figure 13 – PnCancelRequest . 38
Figure 14 – PnCancelResponse . 39
Figure 15 – PnSubscribeRequest . 40
Figure 16 – PnSubscribeResponse . 40
Figure 17 – PnUnsubscribeRequest . 41
Figure 18 – PnUnsubscribeResponse . 41
Figure 19 – PnAbortMessage . 42
Figure 20 – PnResponseError . 43
Figure 21 – ProtocolIOSignalInfo . 44
Figure 22 – PnDeviceScanInfo datatype . 46
Figure 23 – PnDeviceIdentInfo . 49

Table 1 – Mapping of datatypes . 11

---------------------- Page: 9 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
– 4 – IEC TR 62453-52-32:2017 © IEC 2017
Table 2 – Usage of SemanticInfo . 12
Table 3 – Usage of general datatypes . 14
Table 4 – PnDeviceAddress . 15
Table 5 – PROFINET Network Data . 17
Table 6 – PnConnectRequest datatype . 29
Table 7 – PnConnectResponse datatype . 30
Table 8 – PnDisonnectRequest datatype . 31
Table 9 – PnDisconnectResponse datatype . 32
Table 10 – PnReadRequest datatype . 33
Table 11 – PnReadResponse datatype . 35
Table 12 – PnWriteRequest datatype . 36
Table 13 – PnWriteResponse datatype . 37
Table 14 – PnCancelRequest datatype . 38
Table 15 – PnCancelResponse datatype . 39
Table 16 – PnSubscribeRequest datatype . 40
Table 17 – PnSubscribeResponse datatype . 40
Table 18 – PnUnsubscribeRequest datatype . 41
Table 19 – PnUnsubscribeResponse datatype . 42
Table 20 – PnAbortMessage datatype . 42
Table 21 – PnResponseError datatype . 43
Table 22 – PnDatatypeInfo . 44
Table 23 – ProtocollIOSignalInfo datatypes . 45
Table 24 – PnDeviceScanInfo datatype . 46
Table 25 – PnDeviceScanInfo specific mapping . 47
Table 26 – PnDeviceIdentInfo datatypes . 49
Table 27 – PnDeviceIndentInfo specific mapping . 50

---------------------- Page: 10 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
IEC TR 62453-52-32:2017 © IEC 2017 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-32: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62453-52-32, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-
process measurement, control and automation.
Each part of the IEC 62453-52-xy series is intended to be read in conjunction with its
corresponding part in the IEC 62453-3xy series. This document corresponds to
IEC 62453-303-2.

---------------------- Page: 11 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
– 6 – IEC TR 62453-52-32:2017 © IEC 2017
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/440/DTR 65E/514/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 62453 series, under the general title Field device tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 12 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
IEC TR 62453-52-32:2017 © IEC 2017 – 7 –
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of Field Device Tool (FDT)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbuses into control systems, there are a few other tasks which need
to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate
these tools into higher-level system-wide planning or engineering tools. In particular, for use
in extensive and heterogeneous control systems, typically in the area of the process industry,
the unambiguous definition of engineering interfaces that are easy to use for all those
involved is of great importance.
A device-specific software component, called Device Type Manager (DTM), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kind of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how this part of the IEC 62453-52-xy series is aligned in the structure of the
IEC 62453 series.
Part 52-32
Communication
implementation
for common
language
infrastructure –
IEC 61784 CP 3/4,
CP 3/5 and CP 3/6
IEC

Figure 1 – Part 52-32 of the IEC 62453 series

---------------------- Page: 13 ----------------------
SIST-TP CLC IEC/TR 62453-52-32:2019
– 8 – IEC TR 62453-52-32:2017 © IEC 2017
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-32: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6



1 Scope
This part of the IEC 62453-52-xy series, which is a Technical Report, provides information for
1
 technology into the CLI-based implementation of FDT interface
integrating the PROFINET®
specification (IEC TR 62453-42).
This part of IEC 62453 specifies implementation of communication and other services based
on IEC 62453-303-2.
This document neither contains the FDT specification nor modifies it.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 61131-3:2013, Programmable controllers – Part 3: Programming languages
IEC 61158-6-10, Industrial communication networks – Fieldbus specifications – Part 6-10:
Application layer protocol specification – Type 10 elements
IEC 61158 (all parts), Industrial communication networks – Fieldbus specifications
IEC 61784-1:2014, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
IEC
...

SLOVENSKI STANDARD
SIST-TP CLC IEC/TR 62453-52-32:2019
01-junij-2019
Specifikacija vmesnika orodja procesne naprave - 52-32. del: Implementacija
komunikacije za skupno jezikovno infrastrukturo - IEC 61784 CP 3/4, CP 3/5 in CP
3/6 (IEC/TR 62453-52-32:2017)
Field device tool (FDT) interface specification - Part 52-32: Communication
implementation for common language infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP
3/6 (IEC/TR 62453-52-32:2017)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 52-32:
Kommunikationsimplementierung mit der allgemeinen Sprachinfrastruktur -
Kommunikationsprofilfamilie (CPF) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC/TR 62453-52-
32:2017)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 52-32:
Mise en oeuvre d’un profil de communication pour l’infrastructure commune de langage -
CP 3/4, CP 3/5 et CP 3/6 de l’ IEC 61784 (IEC/TR 62453-52-32:2017)
Ta slovenski standard je istoveten z: CLC IEC/TR 62453-52-32:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CLC IEC/TR 62453-52-32:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL REPORT CLC IEC/TR 62453-52-32

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
February 2019
ICS 25.040.40; 35.100.05; 35.110

English Version
Field device tool (FDT) interface specification - Part 52-32:
Communication implementation for common language
infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6
(IEC/TR 62453-52-32:2017)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 52-32: Mise en œuvre d’un profil de 52-32: Kommunikationsimplementierung mit der
communication pour l’infrastructure commune de langage - allgemeinen Sprachinfrastruktur -
CP 3/4, CP 3/5 et CP 3/6 de l’ IEC 61784 Kommunikationsprofilfamilie (CPF) 3/4, 3/5 und 3/6 nach
(IEC/TR 62453-52-32:2017) IEC 61784
(IEC/TR 62453-52-32:2017)


This Technical Report was approved by CENELEC on 2019-01-14.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC IEC/TR 62453-52-32:2019 E

---------------------- Page: 2 ----------------------

CLC IEC/TR 62453-52-32:2019 (E)
European foreword
This document (CLC IEC/TR 62453-52-32:2019) consists of the text of IEC/TR 62453-52-32:2017
prepared by SC 65E "Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process
measurement, control and automation.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC/TR 62453-52-32:2017 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 3 ----------------------

CLC IEC/TR 62453-52-32:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61131-3 2013 Programmable controllers - Part 3: EN 61131-3 2013
Programming languages
IEC 61158-6-10 -  Industrial communication networks - EN 61158-6-10 -
Fieldbus specifications - Part 6-10:
Application layer protocol specification -
Type 10 elements
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61784-1 2014 Industrial communication networks - EN 61784-1 2014
Profiles - Part 1: Fieldbus profiles
IEC 62453-1 2016 Field device tool (FDT) interface EN 62453-1 2017
specification - Part 1: Overview and
guidance
IEC 62453-2 2016 Field device tool (FDT) interface EN 62453-2 2017
specification - Part 2: Concepts and
detailed description
IEC TR 62453-42 2016 Field device tool (FDT) interface - -
specification - Part 42: Object model
integration profile - Common language
infrastructure
IEC 62453-303-2 2009 Field device tool (FDT) interface EN 62453-303-2 2009
specification - Part 303-2: Communication
profile integration - IEC 61784 CP 3/4, CP
3/5 and CP 3/6



3

---------------------- Page: 4 ----------------------

IEC TR 62453-52-32

®


Edition 1.0 2017-06




TECHNICAL



REPORT








colour

inside










Field device tool (FDT) interface specification –

Part 52-32: Communication implementation for common language

infrastructure – IEC 61784 CP 3/4, CP 3/5 and CP 3/6


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-4331-2




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 ----------------------

– 2 – IEC TR 62453-52-32:2017 © IEC 2017
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviated terms and conventions . 9
3.1 Terms and definitions. 9
3.2 Abbreviations . 9
3.3 Conventions . 9
3.3.1 Datatype names and references to datatypes . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus Category . 9
5 Access to instance and device data . 9
5.1 General . 9
5.2 IO signals provided by DTM . 10
5.3 Data interfaces . 10
5.3.1 General . 10
5.3.2 Mapping PROFINET datatypes to FDT datatypes . 10
5.3.3 SemanticInfo . 11
6 Protocol specific behavior . 12
6.1 PROFINET device model . 12
6.2 Configuration and parameterization of PROFINET devices . 13
6.3 PROFINET – related information of a Device DTM . 13
6.4 Remarks on FDT 1.2 / 2 Compatibility . 14
7 Protocol specific usage of general FDT datatypes . 14
8 Protocol specific common datatype: PnDeviceAddress . 14
9 Network management . 15
9.1 General . 15
9.2 Configuration . 16
9.3 Process Data Items . 28
9.4 Parameterization . 28
10 Communication datatypes. 28
10.1 General . 28
10.2 ConnectRequest and ConnectResponse Services . 28
10.2.1 PnConnectRequest Service . 28
10.2.2 PnConnectResponse Service. 29
10.3 DisconnectRequest and DisconnectResponse Services . 30
10.3.1 PnDisconnectRequest Service . 30
10.3.2 PnDisconnectResponse Service . 31
10.4 TransactionRequest and TransactionResponse Services . 32
10.4.1 PnReadRequest Service . 32
10.4.2 PnReadResponse Service . 33
10.4.3 PnWriteRequest Service . 35
10.4.4 PnWriteResponse Service . 36
10.4.5 PnCancelRequest Service . 37
10.4.6 PnCancelResponse Service . 38

---------------------- Page: 6 ----------------------

IEC TR 62453-52-32:2017 © IEC 2017 – 3 –
10.5 SubscribeRequest and SubscribeResponse Service . 39
10.5.1 PnSubscribeRequest . 39
10.5.2 PnSubscribeResponse . 40
10.6 UnsubscribeRequest and UnsubscribeResponse Service . 41
10.6.1 PnUnsubscribeRequest Service . 41
10.6.2 PnUnsubscribeResponse Service . 41
10.7 AbortMessage Service . 42
10.8 PnResponseError . 42
10.8.1 Communication error . 42
10.8.2 Handling of errors during Connect and Disconnect . 43
11 Datatypes for process data information . 43
11.1 General . 43
11.2 PnIOSignalInfo. 43
11.3 Mapping of PROFINET datatypes to FDT datatypes . 45
12 Device identification . 45
12.1 General . 45
12.2 PnDeviceScanInfo datatype . 45
12.3 PnDeviceIdentInfo datatype . 49
Bibliography . 51

Figure 1 – Part 52-32 of the IEC 62453 series . 7
Figure 2 – PROFINET Device Model . 13
Figure 3 – PROFINET Device Address . 15
Figure 4 – PROFINET Network Data . 16
Figure 5 – PnConnectRequest . 29
Figure 6 – PnConnectResponse . 30
Figure 7 – PnDisconnectRequest . 31
Figure 8 – PnDisconnectResponse . 32
Figure 9 – PnReadRequest . 33
Figure 10 – PnReadResponse . 34
Figure 11 – PnWriteRequest . 36
Figure 12 – PnWriteResponse . 37
Figure 13 – PnCancelRequest . 38
Figure 14 – PnCancelResponse . 39
Figure 15 – PnSubscribeRequest . 40
Figure 16 – PnSubscribeResponse . 40
Figure 17 – PnUnsubscribeRequest . 41
Figure 18 – PnUnsubscribeResponse . 41
Figure 19 – PnAbortMessage . 42
Figure 20 – PnResponseError . 43
Figure 21 – ProtocolIOSignalInfo . 44
Figure 22 – PnDeviceScanInfo datatype . 46
Figure 23 – PnDeviceIdentInfo . 49

Table 1 – Mapping of datatypes . 11

---------------------- Page: 7 ----------------------

– 4 – IEC TR 62453-52-32:2017 © IEC 2017
Table 2 – Usage of SemanticInfo . 12
Table 3 – Usage of general datatypes . 14
Table 4 – PnDeviceAddress . 15
Table 5 – PROFINET Network Data . 17
Table 6 – PnConnectRequest datatype . 29
Table 7 – PnConnectResponse datatype . 30
Table 8 – PnDisonnectRequest datatype . 31
Table 9 – PnDisconnectResponse datatype . 32
Table 10 – PnReadRequest datatype . 33
Table 11 – PnReadResponse datatype . 35
Table 12 – PnWriteRequest datatype . 36
Table 13 – PnWriteResponse datatype . 37
Table 14 – PnCancelRequest datatype . 38
Table 15 – PnCancelResponse datatype . 39
Table 16 – PnSubscribeRequest datatype . 40
Table 17 – PnSubscribeResponse datatype . 40
Table 18 – PnUnsubscribeRequest datatype . 41
Table 19 – PnUnsubscribeResponse datatype . 42
Table 20 – PnAbortMessage datatype . 42
Table 21 – PnResponseError datatype . 43
Table 22 – PnDatatypeInfo . 44
Table 23 – ProtocollIOSignalInfo datatypes . 45
Table 24 – PnDeviceScanInfo datatype . 46
Table 25 – PnDeviceScanInfo specific mapping . 47
Table 26 – PnDeviceIdentInfo datatypes . 49
Table 27 – PnDeviceIndentInfo specific mapping . 50

---------------------- Page: 8 ----------------------

IEC TR 62453-52-32:2017 © IEC 2017 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-32: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62453-52-32, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-
process measurement, control and automation.
Each part of the IEC 62453-52-xy series is intended to be read in conjunction with its
corresponding part in the IEC 62453-3xy series. This document corresponds to
IEC 62453-303-2.

---------------------- Page: 9 ----------------------

– 6 – IEC TR 62453-52-32:2017 © IEC 2017
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
65E/440/DTR 65E/514/RVC

Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 62453 series, under the general title Field device tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 10 ----------------------

IEC TR 62453-52-32:2017 © IEC 2017 – 7 –
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of Field Device Tool (FDT)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbuses into control systems, there are a few other tasks which need
to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate
these tools into higher-level system-wide planning or engineering tools. In particular, for use
in extensive and heterogeneous control systems, typically in the area of the process industry,
the unambiguous definition of engineering interfaces that are easy to use for all those
involved is of great importance.
A device-specific software component, called Device Type Manager (DTM), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kind of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how this part of the IEC 62453-52-xy series is aligned in the structure of the
IEC 62453 series.
Part 52-32
Communication
implementation
for common
language
infrastructure –
IEC 61784 CP 3/4,
CP 3/5 and CP 3/6
IEC

Figure 1 – Part 52-32 of the IEC 62453 series

---------------------- Page: 11 ----------------------

– 8 – IEC TR 62453-52-32:2017 © IEC 2017
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 52-32: Communication implementation
for common language infrastructure –
IEC 61784 CP 3/4, CP 3/5 and CP 3/6



1 Scope
This part of the IEC 62453-52-xy series, which is a Technical Report, provides information for
1
 technology into the CLI-based implementation of FDT interface
integrating the PROFINET®
specification (IEC TR 62453-42).
This part of IEC 62453 specifies implementation of communication and other services based
on IEC 62453-303-2.
This document neither contains the FDT specification nor modifies it.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 61131-3:2013, Programmable controllers – Part 3: Programming languages
IEC 61158-6-10, Industrial communication networks – Fieldbus specifications – Part 6-10:
Application layer protocol specification – Type 10 elements
IEC 61158 (all parts), Industrial communication networks – Fieldbus specifications
IEC 61784-1:2014, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
IEC 62453-1:2016, Field device tool (FDT) interface specification – Part 1: Overview and
guidance
IEC 62453-2:2016, Field device tool (FDT) interface specification – Part 2: Concepts and
detailed description
IEC TR 62453-42: 2016, Field device tool (FDT) interface specification – Part 42: Object
model integration profile – Common language infrastructure
IEC 62453-303-2:2009, Field device tool (FDT) interface specification – Part 303-2:
Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and CP 3/6
IEC 62453-303-2:2009/AMD1:2016
___________
1
 PROFINET ® is th
...