iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50083-3:1999

(Main)

Cable networks for television signals, sound signals and interactive services -- Part 3: Active wideband equipment for coaxial cable networks

Cable networks for television signals, sound signals and interactive services -- Part 3: Active wideband equipment for coaxial cable networks

Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including equipment, systems and installations for headend reception, processing and distribution of television and sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. All kinds of networks like CATV-networks, MATV-networks and SMATV-networks, Individual receiving networks and all kinds of equipment, systems and installations installed in such networks, are within this scope. The extent of this standardization work is from the antennas, special signal source inputs to the headend or other interface points to the network up to the system outlet or the terminal input, where no system outlet exists. The standardization of any user terminals (i.e. tuners, receivers, decoders, multimedia terminals etc.) as well as of any coaxial and optical cables and accessories therefor is excluded

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste -- Teil 3: Aktive Breitbandgeräte für koaxiale Kabelnetze

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs -- Partie 3: Matériels actifs à large bande utilisés dans les réseaux de distribution coaxiale

Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
30-Nov-2003
ICS
33.060.40 - Cabled distribution systems
33.120.10 - Coaxial cables. Waveguides
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 50083-3:1998 - Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks

Relations

Replaced By
SIST EN 50083-3:2003 - Cable networks for television signals, sound signals and interactive services -- Part 3: Active wideband equipment for coaxial cable networks
Effective Date
06-May-2014
Replaces
SIST EN 50083-3:1995 - Cabled distribution systems for television and sound signals -- Part 3: Active coaxial wideband distribution equipment
Effective Date
29-Jan-2023
Replaces
SIST EN 50083-3:1995 - Cabled distribution systems for television and sound signals -- Part 3: Active coaxial wideband distribution equipment
Effective Date
06-May-2014

Buy Standard

EN 50083-3:1999EN 50083-3:1999
PreviousNext
Standard
EN 50083-3:1999
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50083-3:1999
01-julij-1999
Cable networks for television signals, sound signals and interactive services - Part
3: Active wideband equipment for coaxial cable networks
Cable networks for television signals, sound signals and interactive services -- Part 3:
Active wideband equipment for coaxial cable networks
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste -- Teil 3: Aktive
Breitbandgeräte für koaxiale Kabelnetze
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs -- Partie 3: Matériels actifs à large bande utilisés dans les
réseaux de distribution coaxiale
Ta slovenski standard je istoveten z: EN 50083-3:1998
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50083-3:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 2 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 3 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 4 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 5 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 6 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 7 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 8 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 9 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 10 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 11 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 12 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 13 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 14 ----------------------

SIST EN 50083-3:1999

---------------------- Page: 15 ----------------------

SIST EN 50083-3:1999

---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50607:2015(Main)
Satellite signal distribution over a single coaxial cable - Second generation
EN 50607:2015

This European Standard describes:
▪ the system physical structure;
▪ the system control signals, which implement a set of messages using DiSEqC physical layer but not the
DiSEqC message structure;
▪ the definition of identified configurations;
▪ the management of the potential collisions in the control signals traffic.
Figure 1 illustrates the physical system configuration considered in this standard.
Several satellite signal demodulators can receive signals from any of the input signal banks (Bank 1, Bank 2,
Bank M, with M ≤ 256) of the LNB or the switch. The signals selected by the demodulators (or receivers) are
transported via a single cable to these demodulators (Receiver 1, Receiver 2, Receiver N, with N ≤ 32).
To achieve these single cable distributions, the Single Cable Interface (SCIF, likely embedded in a LNB or a
Switch) features some specific functions and characteristics.
Figure

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60728-4:2008(Main)
Cable networks for television signals, sound signals and interactive services -- Part 4: Passive wideband equipment for coaxial cable networks
EN 60728-4:2008

This part of IEC 60728 applies to system outlets, splitters and taps, passive single or multiple port equipment comprising filters, attenuators, equalizers, galvanic isolators, power injectors, cable splices, terminating resistors and transfer points, but excluding coaxial cables and receiver leads.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50607:2015(Main)
Satellite signal distribution over a single coaxial cable - Second generation
EN 50607:2015

This European Standard describes:
▪ the system physical structure;
▪ the system control signals, which implement a set of messages using DiSEqC physical layer but not the
DiSEqC message structure;
▪ the definition of identified configurations;
▪ the management of the potential collisions in the control signals traffic.
Figure 1 illustrates the physical system configuration considered in this standard.
Several satellite signal demodulators can receive signals from any of the input signal banks (Bank 1, Bank 2,
Bank M, with M ≤ 256) of the LNB or the switch. The signals selected by the demodulators (or receivers) are
transported via a single cable to these demodulators (Receiver 1, Receiver 2, Receiver N, with N ≤ 32).
To achieve these single cable distributions, the Single Cable Interface (SCIF, likely embedded in a LNB or a
Switch) features some specific functions and characteristics.
Figure

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60728-4:2008(Main)
Cable networks for television signals, sound signals and interactive services -- Part 4: Passive wideband equipment for coaxial cable networks
EN 60728-4:2008

This part of IEC 60728 applies to system outlets, splitters and taps, passive single or multiple port equipment comprising filters, attenuators, equalizers, galvanic isolators, power injectors, cable splices, terminating resistors and transfer points, but excluding coaxial cables and receiver leads.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-3:2023(Main)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
EN ISO 3262-3:2023

This document specifies requirements and corresponding methods of test for blanc fixe.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-4:2021/AC:2023(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
EN IEC 63044-4:2021/AC:2023-07
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day