Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 001: Technical specification

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for connectors intended for use in a temperature range from - 65 °C to 150 °C continuous.

Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder, freie und feste Bauform, auswechselbare Isolierkörper, Gestell-Einschubsteckverbinder, Betriebstemperatur 150 °C konstant - Teil 001: Technische Lieferbedingungen

Diese Norm legt die allgemeingültigen Eigenschaften, die Qualifikations , Abnahme  und Qualitätssicherungs-bedingungen sowie die Prüfprogramme und -gruppen für Steckverbinder fest, die für den Einsatz in einem Temperaturbereich von –65 °C bis 150 °C konstant bestimmt sind.

Série aérospatiale - Connecteurs électriques rectangulaires rackables, fiches et embases, à inserts interchangeables, température d'utilisation 150 °C continu - Partie 001: Spécification technique

Aeronavtika - Konektorji, vtič in vtičnica, električni, pravokotni, zamenljivi tip, s stojalom in ploščo, s stalno delovno temperaturo do 150 °C - 001. del: Tehnična specifikacija

General Information

Status
Published
Publication Date
22-Dec-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Dec-2013
Due Date
16-Feb-2014
Completion Date
23-Dec-2013

Relations

Buy Standard

Standard
EN 3682-001:2014
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Elektrischer Rechtecksteckverbinder, freie und feste Bauform, auswechselbare Isolierkörper, Gestell-Einschubsteckverbinder, Betriebstemperatur 150 °C konstant - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs électriques rectangulaires rackables, fiches et embases, à inserts interchangeables, température d'utilisation 150 °C continu - Partie 001: Spécification techniqueAerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3682-001:2013SIST EN 3682-001:2014en,fr,de01-februar-2014SIST EN 3682-001:2014SLOVENSKI
STANDARDSIST EN 3682-001:20091DGRPHãþD



SIST EN 3682-001:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3682-001
September 2013 ICS 49.060 Supersedes EN 3682-001:2006English Version
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 001: Technical specification
Série aérospatiale - Connecteurs électriques rectangulaires rackables, fiches et embases, à inserts interchangeables, température d'utilisation 150 °C continu - Partie 001: Spécification technique
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder, freie und feste Bauform, auswechselbare Isolierkörper, Gestell-Einschubsteckverbinder, Betriebstemperatur 150 °C konstant - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3682-001:2013: ESIST EN 3682-001:2014



EN 3682-001:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Description . 5 5 Design . 6 6 Definition drawings and masses . 7 7 Tests . 47 8 Quality assurance . 65 9 Designation and marking . 69 10 Delivery conditions . 70 11 Packaging . 70 12 Storage . 70
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 3 Foreword This document (EN 3682-001:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3682-001:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 4 Introduction This family of connectors is derived from MIL-C-83527 with which it is intermateable and interchangeable. It offers a comprehensive range of contact arrangements. The plug is fitted with a grounding spring system which is replaceable in the field. It is particularly for use on rack application in zones of severe environmental conditions on board aircraft, applying EN 2282. 1 Scope This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for connectors intended for use in a temperature range from – 65 °C to 150 °C continuous. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2282, Aerospace series — Characteristics of aircraft electrical supplies
EN 2267-002, Aerospace series — Cables, electrical, for general purpose — Operating temperatures between − 55 °C and 260 °C — Part 002: General EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods EN 3155 (all parts), Aerospace series — Electrical contacts used in elements of connection EN 3197, Aerospace series - Design and installation of aircraft electrical and optical interconnection systems
EN 3682 (all parts), Aerospace series — Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous EN 3909, Aerospace series — Test fluids and test methods for electric components and sub-assemblies EN 4529-002, Aerospace series — Elements of electrical and optical connection — Sealing plugs — Part 002: Index of product standards EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts MIL-C-83527 (all parts), Connectors, plug and receptacle, electrical, rectangular multiple insert type, rack to panel, environment resisting, 150 °C total continuous operating temperature 1) MIL-L-15719, (Amendment 3), Military specification, lubricating grease (High temperature, electric motor, ball and roller bearings) 1) MIL-STD-454, Military standard — Standard General Requirements for Electronic Equipment 1)
1) Published by: DoD National (US) Mil. Department of Defense http://www.defenselink.mil/ SIST EN 3682-001:2014



EN 3682-001:2013 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 and the following apply. 3.1 LRU Line Replaceable Unit 4 Description 4.1 General The pair of connectors has the following characteristics:  a metal to metal bottoming (see Figure 1);  the interface between the plug and the receptacle connectors provides a seal between contacts when mated;  when mated together, the connector pair and cable passage grommets are leak tight;  inserts (except 1-70C1) are provided with an O-ring seal which provides sealing between the housing and the insert.  low insertion force contacts;  size 22 male contacts are mechanically protected by their installation in the insert;  shielding continuity is provided between mated connectors housings;  field replaceable inserts;  EMI grounding springs are removable and field replaceable. The connectors use sizes 22, 20, 16 and 12 crimp contacts; sizes 5, 12 and 16 coaxial contacts, size 8 triaxial contacts, quadrax contacts and fibre optical contacts. Polarization posts and keys are provided to ensure correct connection, and these may be turned around, as required, by the user, giving 99 different connection combinations. 4.2 Receptacle The receptacle has three polarization keys. Depending upon its housing size, the receptacle will have 2, 4, or 6 inserts. Size 22 contacts in the receptacle are always female contacts. All larger contact sizes are male contacts. SIST EN 3682-001:2014



EN 3682-001:2013 (E) 6 4.3 Plug The plug has three polarization posts. Depending upon its housing size, the plug will have 2, 4 or 6 inserts. Size 22 contacts in the plug are always male contacts. All larger contact sizes are female contacts. The plug is fitted with field replaceable grounding spring systems. 4.4 Materials and surface treatment 4.4.1 General When dissimilar metals are in close contact, adequate protection against corrosion shall be used for the electromotive force of the cell not to exceed 0,25 V. 4.4.2 Housings Connector housing material shall be protected against corrosion by a protective coating, enabling the specified test criteria to be met. 4.4.3 Contacts Removable contacts, see EN 3682-002. 4.4.4 Non-metallic materials The materials used for inserts, seals and grommets shall have a hardness and the mechanical and electrical characteristics consistent with the required use. 5 Design 5.1 Housings Connector housing shall be a one piece unit. The plug shall be fitted with a resilient peripheral seal to provide environmental peripheral sealing and stabilizing between mating housings. Electrical contact between the housings shall occur before electrical contact engagement. 5.2 Inserts Insert shall be interchangeable and made of a rigid dielectric material or metallic material when specified. Cross-sections and angle radii shall be sufficient to ensure that no cracking, chipping or breakage can occur in normal use. The insert shall be rear removable from the housing and shall be mechanically retained in the housing. The removal of an insert from the shell shall be done by using no other tool than a screwdriver. To install the insert in the shell, it will be necessary to lubricate the O-ring with a lubricant such as specified by MIL-L-15719. The mating face of the insert shall ensure that a good sealing is provided when connectors are mated together. The interfacial seal shall be bonded on the insert for size 22 female contacts and on the insert for male contacts of other sizes. SIST EN 3682-001:2014



EN 3682-001:2013 (E) 7 The grommet shall permit sealing for all cable diameters indicated in EN 3682-002 and shall not be removable. For sizes 5 and 8 contacts, the insert contact cavity and the grommet shall accept the sealing boots described in EN 4529-002. The mechanical contact retention system shall be integrated in the hard insert. Connectors shall be designed to allow the installation and removal of individual contacts without having to remove the insert from the housing. Inserts shall be for rear release rear removable contacts. Insertion, extraction tools are those specified in EN 3155 standard series. All inserts (except 2-62Q2) having both size 8 quadrax contacts cavities and size 22 contacts cavities have a step on their front face. Inserts for receptacle connectors have the size 22 contact cavities at a higher elevation than the other contact sizes cavities. Inserts for plug connectors have the size 22 contact cavities recessed compared to the other contact cavity sizes. 6 Definition drawings and masses General dimensions and masses of plug, receptacle and inserts are given in the product standards. 6.1 Connector mating dimensions Connectors mated conditions are shown in Figure 1. Contact position is defined in Figure 2. SIST EN 3682-001:2014



EN 3682-001:2013 (E) 8 Dimensions are in millimetres.
Key 1 Grounding spring system 2 Receptacle assembly 3 Plug assembly 4 Metal to metal bottoming on both sides of polarizing key retaining plate 5 Stabilizer 6 X = 21,64 initial engagement max. Figure 1 — Connector mated conditions SIST EN 3682-001:2014



EN 3682-001:2013 (E) 9
Key 1 Size 22 socket contact - Other size pin contact 2 Mechanical bottom of receptacle 3 Size 22 pin contact - Other size socket contact 4 Mechanical bottom of plug Figure 2 Table 1 — Contact position Contact size Male Female A B A B 22 – 17,20/16,33 11,18/10,56 – 20 12,19/11,12 – – 18,82/17,55 16 a
10,34/9,07 – – 18,31/17,04 12 10,34/9,17 – – 18,14/17,02 Triaxial size 8 b
11,07/10,21 – – 18,44/17,58 Quadrax size 8 b 11,07/10,21 – – 18,44/17,58 Coaxial size 16 c
10,34/9,07 – – 18,31/17,04 Coaxial size 12 12,19/10,97 – – 18,11/16,92 Coaxial size 5 11,18/10,26 – – 18,44/17,58 Coaxial size 1 10,79/9,83 – – 20,34/19,53 a For arrangements 1-126 and 2-62Q2, A = 7,83/7,07 and B = 15,76/15,04. b For arrangements 2-62Q2, A = 8,78/8,04 and B = 15,92/15,13. c For arrangements 1-126 and 2-62Q2, A = 7,98/7,07 and B = 15,76/15,05.
6.2 Receptacle mating dimensions Mating dimensions for sizes 2, 3 and 4 receptacle housings are specified on Figures 3, 4, 5 and 6 and Tables 2, 3 and 4. SIST EN 3682-001:2014



EN 3682-001:2013 (E) 10 Dimensions are in millimetres.
Key 1 18,57 18,37 for size 22 socket inserts 6 Boss (twice) Ø 4,78 Ø 4,70 2 Boss (twice) Ø 3,99 Ø 3,91 7 Type all size 22 contact cavities (see Table 11) 3 Centre line insert 8 Type all other size contact cavities 4 Center line
9 21,03 20,83 for other size pin inserts - To face of rigid 5 Insert assembly
Insert except 1-126 and 2-62Q2 where the distance is 18,37 / 18,57 Figure 3 B SIST EN 3682-001:2014



EN 3682-001:2013 (E) 11
Key 1 Centre line T Figure 4 Table 2 DATUM T DATUM S 100,71 100,76 100,79 100,81 100,84 100,86 32,94 0,30 0,30 0,28 0,25 0,23 0,20 32,97 0,28 0,28 0,25 0,23 0,23 0,20 32,99 0,25 0,25 0,23 0,23 0,20 0,18 33,02 0,23 0,23 0,23 0,20 0,18 0,18 33,04 0,20 0,20 0,20 0,18 0,18 0,15
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 12
Key 1 Centre line T 2 Centre line insert Figure 5 Table 3 DATUM T DATUM S 100,71 100,76 100,79 100,81 100,84 100,86 69,98 0,30 0,30 0,28 0,25 0,23 0,20 70,03 0,30 0,30 0,28 0,25 0,23 0,20 70,05 0,28 0,28 0,25 0,23 0,23 0,20 70,08 0,25 0,25 0,23 0,23 0,20 0,18 70,10 0,23 0,23 0,23 0,20 0,18 0,18 70,13 0,20 0,20 0,20 0,18 0,18 0,15
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 13
Key 1 Centre line T 2 Centre line insert Figure 6 Table 4 DATUM T DATUM S 100,71 100,76 100,79 100,81 100,84 100,86 107,06 0,30 0,30 0,28 0,25 0,23 0,20 107,11 0,30 0,30 0,28 0,25 0,23 0,20 107,14 0,28 0,28 0,25 0,23 0,23 0,20 107,16 0,25 0,25 0,23 0,23 0,20 0,18 107,19 0,23 0,23 0,23 0,20 0,18 0,18 107,21 0,20 0,20 0,20 0,18 0,18 0,15
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 14 6.3 Plug mating dimensions Mating dimensions for sizes 2, 3 and 4 plug connectors are specified on Figures 7, 8, 9 and 10 and Tables 5, 6 and 7. Dimensions are in millimetres.
Key 1 Insert location 34,01 33,50 7 Center line insert 2 17,75 17,55 for size 22 pin insert 8 Center line
20,21 20,01 for other size receptacle insert 9 Inserts 3 Center line
Ø 3,99 Ø 3,91 10 Emi feature - The emi spring is removable and replaceable by the users under their responsibilities 4 Type all other size contact cavities 11 Boss (twice)
Ø 4,78 Ø 4,70 5 Type all size 22 contact cavities (see Table 11) 12 2,54 boss (twice) 6 Stabilizer seal 13 Chamfer 0,10 max. - Groove for emi feature Figure 7 S B A SIST EN 3682-001:2014



EN 3682-001:2013 (E) 15
Key 1 Centre line of datum T Figure 8 Table 5 DATUM T DATUM S 100,51 100,53 100,56 100,58 100,61 100,64 100,66 32,69 0,15 0,18 0,18 0,20 0,20 0,20 0,20 32,72 0,18 0,18 0,20 0,23 0,23 0,23 0,23 32,74 0,18 0,20 0,23 0,23 0,25 0,25 0,25 32,77 0,20 0,23 0,23 0,25 0,28 0,28 0,28 32,79 0,20 0,23 0,25 0,28 0,30 0,30 0,30
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 16
Key 1 Centre line of datum T 2 Centre line insert Figure 9 Table 6 DATUM T DATUM S 100,51 100,53 100,56 100,58 100,61 100,64 100,66 69,77 0,15 0,18 0,18 0,20 0,20 0,20 0,20 69,80 0,18 0,18 0,20 0,23 0,23 0,23 0,23 69,82 0,18 0,20 0,23 0,23 0,25 0,25 0,25 69,85 0,20 0,23 0,23 0,25 0,28 0,28 0,28 69,88 0,20 0,23 0,25 0,28 0,30 0,30 0,30 69,90 0,20 0,23 0,25 0,28 0,30 0,30 0,30 69,93 0,20 0,23 0,25 0,28 0,30 0,30 0,30
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 17
Key 1 Centre line of datum T 2 Centre line insert Figure 10 Table 7 DATUM T DATUM S 100,51 100,53 100,56 100,58 100,61 100,64 100,66 106,86 0,15 0,18 0,18 0,20 0,20 0,20 0,20 106,88 0,18 0,18 0,20 0,23 0,23 0,23 0,23 106,91 0,18 0,20 0,23 0,23 0,25 0,25 0,25 106,93 0,20 0,23 0,23 0,25 0,28 0,28 0,28 106,96 0,20 0,23 0,25 0,28 0,30 0,30 0,30 106,99 0,20 0,23 0,25 0,28 0,30 0,30 0,30 107,01 0,20 0,23 0,25 0,28 0,30 0,30 0,30
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 18 6.4 Dimensions of connector housing cavities See Figure 11 and Table 8. Dimensions in millimetres
Key 1 Bottom insert 2 R 1,5 max. configuration optional 3 All around Figure 11 Table 8 Cavities D F A, C, E 39,065 39,03 40,45 40,35 B, D, F 27,885 27,85 29,28 29,18
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 19 6.5 Dimensions of insert retaining plate See Figure 12 and Table 9. Dimensions in millimetres
Key 1 Two holes Ø 3,25 Ø 3,10 2 Centre line of datum X 3 2 ½ identical insert retaining plate
Figure 12 Table 9 Insert cavities A B C
max. A, C, E 44,96 50,17 49,91 45,97 B, D, F 33,78 38,99 38,74 34,80
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 20 6.6 Contact cavities details See Figures 13, 14 and 15. See Tables 10 and 11. Dimensions are in millimetres.
Figure 13 — Size 22 contact cavity
a)
Socket contact cavity b)
Socket cavity size 1 coaxial Figure 14 Table 10 Contact size Dimensions A B
min. 20 2,67 / 2,41 1,27 16 3,38 / 3,12 2,01 12 4,57 / 4,32 2,51 Coaxial 1 13,07 / 12,80 – Coaxial 5 7,29 / 7,04 5,72 Triaxial/quadrax 8 7,49 / 7,24 5,77 SIST EN 3682-001:2014



EN 3682-001:2013 (E) 21
Key 1 Seal 2 Contact Figure 15 — Interfacial seal Table 11 Contact size Dimensions A B C
max. 22 female 2,29 / 2,13 1,75 / 1,55 2,29 20 male 1,83 / 1,68 2,54 / 2,29 1,83 16 male 2,51 / 2,34 2,67 / 2,41 2,51 12 male 3,33 / 3,15 2,79 / 2,54 3,33 Coaxial 5 male 7,01 / 6,81 2,29 / 2,03 7,01 Triaxial/quadrax 8 male 7,01 / 6,81 2,67 / 2,41 7,01 No interfacial seal for size 1 coaxial.
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 22 6.7 Contact arrangements Insert contact arrangements are specified by Figures 16 to 40 which show the mating face of the inserts for receptacle connectors. The true positioning for contact cavities is defined in Tables 5 and 6 and Table 7. Identification of the contact position shall be permanently marked in contrasting colour on the mating face of the insert or interfacial seal and on the rear face of the wire sealing grommet, identification shall not be recessed or raised on the sealing surfaces.
Key 1 Front face 2 Position Figure 16 Table 12 Contact size Position
Contact size 22
φ 0,06 D F K
Contact size 20
φ 0,10 D F K
Contact size 16
φ 0,10 D F K
Contact size 12
φ 0,10 D F K
Triaxial and quadrax size 8
φ 0,10 D F K
Coaxial size 5
φ 0,10 D F K
Coaxial size 1
φ 0,10 D F K
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 23 1-150
Figure 17 — Contact arrangement 1-150 Table 13 — Contact arrangement 1-150 Dimensions in millimetres Contact position a Y X − 11,43 − 8,89 − 6,35 − 3,81 − 1,27 + 1,27 + 3,81 + 6,35 + 8,89 + 11,43 + 17,78 1 2 3 4 5 6 7 8 9 10 + 15,24 11 12 13 14 15 16 17 18 19 20 + 12,70 21 22 23 24 25 26 27 28 29 30 + 10,16 31 32 33 34 35 36 37 38 39 40 + 7,62 41 42 43 44 45 46 47 48 49 50 + 5,08 51 52 53 54 55 56 57 58 59 60 + 2,54 61 62 63 64 65 66 67 68 69 70 0 71 72 73 74 75 76 77 78 79 80 − 2,54 81 82 83 84 85 86 87 88 89 90 − 5,08 91 92 93 94 95 96 97 98 99 100 − 7,62 101 102 103 104 105 106 107 108 109 110 − 10,16 111 112 113 114 115 116 117 118 119 120 − 12,70 121 122 123 124 125 126 127 128 129 130 − 15,24 131 132 133 134 135 136 137 138 139 140 − 17,78 141 142 143 144 145 146 147 148 149 150 a Mating face of insert for female contacts is shown.
Table 14 Contacts Size Quantity Location 22 150 1 to 150
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 24 1-47T2
Figure
18 — Contact arrangement 1-47T2 Table 15 — Contact arrangement 1-47T2 Dimensions in millimetres Contact position a
Y X − 9,52 − 8,00 − 5,72 − 1,90 0 + 1,90 + 5,72 + 8,00 + 9,52 + 17,14 1 – 2 3 – 4 5 – 6 + 13,34 7 – 8 9 – 10 11 – 12 + 9,52 13 – 14 15 – 16 17 – 18 + 5,72 19 – 20 21 – 22 23 – 24 + 1,90 25 – 26 27 – 28 29 – 30 − 1,90 31 – 32 33 – 34 35 – 36 − 5,72 37 – 38 39 – 40 41 – 42 − 9,52 – – – 43 – 44 – – – − 13,34 – – – – 45 – – – – − 14,22 – 48 – – – – – 49 – − 17,14 – – – 46 – 47 – – – a Mating face of insert for male contacts is shown.
Table 16 Contacts Size Quantity Location 20 47 1 to 47 8 triaxial 2 48 to 49
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 25 1-24
Figure 19 — Contact arrangement 1-24 Table 17 — Contact arrangement 1-24 Dimensions in millimetres Contact position a
Y X − 9,52 − 3,18 + 3,18 + 9,52 + 15,88 1 2 3 4 + 9,52 5 6 7 8 + 3,18 9 10 11 12 − 3,18 13 14 15 16 − 9,52 17 18 19 20 − 15,88 21 22 23 24 a Mating face of insert for male contacts is shown.
Table 18 Contacts Size Quantity Location 12 24 1 to 24
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 26 1-60
Figure 20 — Contact arrangement 1-60 Table 19 — Contact arrangement 1-60 Dimensions in millimetres Contact position a
Y X − 9,52 − 5,72 − 1,90 + 1,90 + 5,72 + 9,52 + 17,14 1 2 3 4 5 6 + 13,34 7 8 9 10 11 12 + 9,52 13 14 15 16 17 18 + 5,72 19 20 21 22 23 24 + 1,90 25 26 27 28 29 30 − 1,90 31 32 33 34 35 36 − 5,72 37 38 39 40 41 42 − 9,52 43 44 45 46 47 48 − 13,34 49 50 51 52 53 54 − 17,14 55 56 57 58 59 60 a Mating face of insert for male contacts is shown.
Table 20 Contacts Size Number Cavities 20 60 1 to 60 SIST EN 3682-001:2014



EN 3682-001:2013 (E) 27 1-70C12
Figure 21 — Contact arrangement 1-70C12 Table 21 — Contact arrangement 1-70C12 Dimensions in millimetres Contact position a
Y X − 11,43 − 9,52 − 8,89 − 6,35 − 3,81 − 3,18 − 1,27 + 1,27 + 3,18 + 3,81 + 6,35 + 8,89 + 9,52 + 11,43 + 17,78 1 – 2 3 4 – 5 6 – 7 8 9 – 10 + 15,24 11 – 12 13 14 – 15 16 – 17 18 19 – 20 + 12,70 21 – 22 23 24 – 25 26 – 27 28 29 – 30 + 10,16 31 – 32 33 34 – 35 36 – 37 38 39 – 40 + 7,62 41 – 42 43 44 – 45 46 – 47 48 49 – 50 + 5,08 51 – 52 53 54 – 55 56 – 57 58 59 – 60 + 2,54 61 – 62 63 64 – 65 66 – 67 68 69 – 70 − 2,30 – 71 – – – 72 – – 73 – – – 74 – − 9,00 – 75 – – – 76 – – 77 – – – 78 – − 15,70 – 79 – – – 80 – – 81 – – – 82 – a Mating face of insert for size 22 female contact is shown.
Table 22 Contacts Size Quantity Location 22 70 1 to 70 12 12 71 to 82 SIST EN 3682-001:2014



EN 3682-001:2013 (E) 28 1-35
Figure 22 — Contact arrangement 1-35 Table 23 — Contact arrangement 1-35 Dimensions in millimetres Contact position a
Y X − 10,16 − 5,08 0 + 5,08 + 10,16 + 15,24 1 2 3 4 5 + 10,16 6 7 8 9 10 + 5,08 11 12 13 14 15 0 16 17 18 19 20 − 5,08 21 22 23 24 25 − 10,16 26 27 28 29 30 − 15,24 31 32 33 34 35 a Mating face of insert for male contacts is shown.
Table 24 Contacts Size Quantity Location 16 35 1 to 35
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 29 1-126
Figure 23 — Contact arrangement 1-126 Table 25 — Contact arrangement 1-126 Dimensions in millimetres Contact position a
Y X − 11,43 − 10,15 − 8,89 − 6,35 − 6,09 − 3,81 − 2,03 − 1,27 + 1,27 + 2,03 + 3,81 + 6,09 + 6,35 + 8,89 + 10,15 + 11,43 + 16,38 – 1 – – – – 2 – – – – 3 – – – – + 14,10 – – – – 4 – – – – 5 – – – – 6 – + 10,16 7 – 8 9 – 10 – 11 12 – 13 – 14 15 – 16 + 7,62 17 – 18 19 – 20 – 21 22 – 23 – 24 25 – 26 + 5,08 27 – 28 29 – 30 – 31 32 – 33 – 34 35 – 36 + 2,54 37 – 38 39 – 40 – 41 42 – 43 – 44 45 – 46 0 47 – 48 49 – 50 – 51 52 – 53 – 54 55 – 56 − 2,54 57 – 58 59 – 60 – 61 62 – 63 – 64 65 – 66 − 5,08 67 – 68 69 – 70 – 71 72 – 73 – 74 75 – 76 − 7,62 77 – 78 79 – 80 – 81 82 – 83 – 84 85 – 86 − 10,16 87 – 88 89 – 90 – 91 92 – 93 – 94 95 – 96 − 12,70 97 – 98 99 – 100 – 101 102 – 103 – 104 105 – 106 − 15,24 107 – 108 109 – 110 – 111 112 – 113 – 114 115 – 116 − 17,78 117 – 118 119 – 120 – 121 122 – 123 – 124 125 – 126 a Mating face of insert for size 22 female and size 16 male contacts is shown. Table 26 Contacts Size Quantity Location 16 6 1 to 6 22 120 7 to 126 SIST EN 3682-001:2014



EN 3682-001:2013 (E) 30 1-C12T6
Figure 24 — Contact arrangement 1-C12T6 Table 27 — Contact arrangement 1-C12T6 Dimensions in millimetres Contact position a
Y X − 9,84 − 8,13 − 4,92 0 + 4,92 + 8,13 + 9,84 + 14,36 – 1 – – – 2 – + 9,73 – – – 3 – – – + 5,10 – 4 – – – 5 – + 0,47 – – – 6 – – – − 2,26 7 – – – – – 8 − 5,71 – – 9 – 10 – – − 9,16 11 – – 12 – – 13 − 12,61 – – 14 – 15 – – − 16,06 16 – – 17 – – 18 a Mating face of insert for male contacts is shown.
Table 28 Contacts Size Quantity Location 8 triaxial 6 1 to 6 12 coaxial 12 7 to 18 This insert is metallic. SIST EN 3682-001:2014



EN 3682-001:2013 (E) 31 1-70C1
Figure 25 — Contact arrangement 1-70C1 Table 29 — Contact arrangement 1-70C1 Dimensions in millimetres Contact position a
Y X − 11,43 − 8,89 − 6,35 − 3,81 − 1,27 0 + 1,27 + 3,81 + 6,35 + 8,89 + 11,43 + 17,78 1 2 3 4 5 – 6 7 8 9 10 + 15,24 11 12 13 14 15 – 16 17 18 19 20 + 12,70 21 22 23 24 25 – 26 27 28 29 30 + 10,16 31 32 33 34 35 – 36 37 38 39 40 + 7,62 41 42 43 44 45 – 46 47 48 49 50 + 5,08 51 52 53 54 55 – 56 57 58 59 60 + 2,54 61 62 63 64 65 – 66 67 68 69 70 − 10,16 – – – – – 71 – – – – – a Mating face of insert for size 22 female contacts is shown.
Table 30 Contacts Size Quantity Location 22 70 1 to 70 1 coaxial 1 71
SIST EN 3682-001:2014



EN 3682-001:2013 (E) 32 1-Q11
Figure 26 — Contact arrangement 1-Q11 Table 31 — Contact arrangement 1-Q11 Dimensions in millimetres Contact position a
Y X − 8,03 0 + 8,03 + 13,92 AA – CC + 9,27 – BB – + 4,65 DD – FF 0 – EE – − 4,65 GG – JJ − 9,27 – HH – − 13,92 KK – LL a Mating face of insert for male contacts shown.
Table 32 Contacts Size Quantity Location 8 (quadrax) 11 AA to LL This insert is metallic SIST EN 3682-001:2014



EN 3682-001:2013 (E) 33 1-118Q2
Figure 27 — Contact arrangement 1-118Q2 Table 33 — Contact arrangement 1-118Q2 Dimensions in millimetres Contact location a Y X − 11,43 − 8,89 − 8,00 − 6,35 − 3,81 − 1,27 + 1,27 + 3,81 + 6,35 + 8,00 + 8,89 + 11,43 + 17,78 A1 B1 – C1 D1 E1 F1 G1 H1 – J1 K1 + 15,24 A2 B2 – C2 D2 E2 F2 G2 H2 – J2 K2 + 12,70 A3 B3 – C3 D3 E3 F3 G3 H3 – J3 K3 + 10,16 A4 B4 – C4 D4 E4 F4 G4 H4 – J4 K4 + 7,62 A5 B5 – C5 D5 E5 F5 G5 H5 – J5 K5 + 5,08 A6 B6 – C6 D6 E6 F6 G6 H6 – J6 K6 + 2,54 A7 B7 – C7 D7 E7 F7 G7 H7 – J7 K7 0 A8 B8 – C8 D8 E8 F8 G8 H8 – J8 K8 − 2,54 A9 B9 – C9 D9 E9 F9 G9 H9 – J9 K9 − 5,08 A10 B10 – C10 D10 E10 F10 G10 H10 – J10 K10 − 7,62 A11 B11 – C11 D11 E11 F11 G11 H11 – J11K K11 − 10,16 – – – – – E12 F12 – – – – – − 12,70 – – – – – E13 F13 – – – – – − 14,22 – – 1 – – – – – – 2 – – − 15,24 – – – – – E14 F14 – – – – – − 17,78 – – – – – E15 F15 – – – – – a Mating face of insert for male contacts shown. Table 34 Contacts Size Quantity Location 22 118 A1 to K11, E12 to E15, F12 to F15 8 triaxial or quadrax 2 1, 2 SIST EN 3682-001:2014



EN 3682-001:2013 (E) 34 1-68Q4
Figure 28 — Contact arrangement 1-68Q4 Table 35 — Contact arrangement 1-68Q4 Dimensions in millimetres Contact location a Y X − 11,43 − 8,89 − 8,00 − 6,35 − 3,81 − 1,27 0 + 1,27 + 3,81 + 6,35 + 8,00 + 8,89 + 11,43 + 16,51 – – – – – – 5 – – – – – – + 14,22 – – 1 – – – – – – – 2 – – + 11,43 – – – – – – 6 – – – – – – + 7,62 11 12 – 13 14 – – – 15 16 – 17 18 + 6,35 – – – – – – 7 – – – – – – + 5,08 19 20 – 21 22 – – – 23 24 – 25 26 + 2,54 27 28 – 29 30 31 – 32 33 34 – 35 36 0 37 38 – 39
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.