SIST EN 301 823-2-2 V1.1.1:2006
(Main)Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 2: Radio Link Control (RLC) sublayer; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 2: Radio Link Control (RLC) sublayer; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERLAN Type 2; Data Link Control (DLC) protocol; Radio Link Control (RLC) sublayer [1]. The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
Širokopasovna radijska dostopovna omrežja (BRAN) – Zelo zmogljivo radijsko lokalno omrežje (HIPERLAN), tip 2 – Specifikacija za preskušanje skladnosti protokola krmiljenja podatkovnih povezav (DLC) – 2. del: Podplast kontrole radijske povezave (RLC) – 2. poddel: Zgradba preskušalnega niza in namen preskušanja (TSS&TP) – Specifikacija
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 823-2-2 V1.1.1:2006
01-februar-2006
Širokopasovna radijska dostopovna omrežja (BRAN) – Zelo zmogljivo radijsko
lokalno omrežje (HIPERLAN), tip 2 – Specifikacija za preskušanje skladnosti
protokola krmiljenja podatkovnih povezav (DLC) – 2. del: Podplast kontrole
radijske povezave (RLC) – 2. poddel: Zgradba preskušalnega niza in namen
preskušanja (TSS&TP) – Specifikacija
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing
for the Data Link Control (DLC) protocol; Part 2: Radio Link Control (RLC) sublayer; Sub-
part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
Ta slovenski standard je istoveten z: EN 301 823-2-2 Version 1.1.1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
35.110 Omreževanje Networking
SIST EN 301 823-2-2 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
---------------------- Page: 2 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
ETSI EN 301 823-2-2 V1.1.1 (2001-01)
European Standard (Telecommunications series)
Broadband Radio Access Networks (BRAN);
HIPERLAN Type 2;
Conformance testing for the
Data Link Control (DLC) protocol;
Part 2: Radio Link Control (RLC) sublayer;
Sub-part 2: Test Suite Structure and
Test Purposes (TSS&TP) specification
---------------------- Page: 3 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
2 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
Reference
DEN/BRAN-002T004-2-2
Keywords
access, HIPERLAN, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
3 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
Contents
Intellectual Property Rights .6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions . 7
3.2 Abbreviations. 8
4 Test suite structure.9
4.1 Structure . 9
4.2 Test groups . 9
4.2.1 Protocol groups. 9
4.2.1.1 Association control function . 9
4.2.1.2 Radio resource control function . 10
4.2.1.3 DLC user connection function. 10
4.2.2 Main test groups . 10
4.2.2.1 Capability (CA) tests . 10
4.2.2.2 Valid Behaviour (BV) tests. 10
4.2.2.3 Invalid Behaviour (BI) tests . 10
4.2.2.4 Inopportune Behaviour (BO) tests. 11
4.2.2.5 Timer (TI) tests. 11
5 Test Purposes (TP).11
5.1 Introduction. 11
5.1.1 TP definition conventions. 11
5.1.2 TP naming conventions. 12
5.1.3 Sources of TP definitions . 12
5.2 Test purposes for AP . 13
5.2.1 Association control function. 13
5.2.1.1 RBCH Association . 13
5.2.1.2 Mac Id assignment. 13
5.2.1.3 Link capability. 13
5.2.1.4 Encryption. 13
5.2.1.5 Authentication. 13
5.2.1.6 Common Key distribution. 15
5.2.1.7 Information transfer. 15
5.2.1.8 Multicast . 15
5.2.1.9 Disassociation . 16
5.2.1.10 Key refresh. 16
5.2.1.11 Association rejection . 16
5.2.1.12 Unsupported messages. 16
5.2.1.13 Timers and repetitions of messages . 17
5.2.2 Radio resource control . 17
5.2.2.1 Dynamic frequency selection . 17
5.2.2.1.1 Requesting . 17
5.2.2.2 Handover. 18
5.2.2.2.1 Sector Handover. 18
5.2.2.2.2 Radio Handover . 18
5.2.2.2.3 Network Handover . 18
5.2.2.2.4 Handover Rejection. 18
5.2.2.3 Power saving. 19
5.2.2.3.1 Sleep. 19
5.2.2.3.2 Alive. 19
5.2.2.3.2.1 Mobile originated . 19
5.2.2.3.2.2 Mobile terminated. 19
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
4 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
5.2.2.3.3 Absence . 19
5.2.2.4 Unsupported messages. 19
5.2.2.5 Timers and repetitions of messages . 20
5.2.3 DLC user connection. 20
5.2.3.1 Centralized mode. 20
5.2.3.1.1 Set-up . 20
5.2.3.1.1.1 Mobile originated . 20
5.2.3.1.1.2 Mobile terminated. 20
5.2.3.1.2 Release . 20
5.2.3.1.2.1 Mobile originated . 20
5.2.3.1.2.2 Mobile terminated. 21
5.2.3.1.3 Modify. 21
5.2.3.1.3.1 Mobile originated . 21
5.2.3.1.3.2 Mobile terminated. 21
5.2.3.1.4 Reset. 21
5.2.3.1.4.1 Mobile originated . 21
5.2.3.1.4.2 Mobile terminated. 21
5.2.3.2 Direct mode. 22
5.2.3.2.1 Set-up VOID. 22
5.2.3.2.2 Release VOID. 22
5.2.3.2.3 Modify VOID . 22
5.2.3.2.4 Relay VOID. 22
5.2.3.3 Unsupported messages. 22
5.2.3.4 Timers and repetitions of messages . 22
5.3 Test purposes for MT . 23
5.3.1 Association control function. 23
5.3.1.1 RBCH Association . 23
5.3.1.2 Mac Id assignment. 23
5.3.1.3 Link capability. 23
5.3.1.4 Encryption. 24
5.3.1.5 Authentication. 24
5.3.1.6 Common Key distribution. 25
5.3.1.7 Information transfer. 25
5.3.1.8 Multicast . 26
5.3.1.9 Disassociation . 26
5.3.1.10 Key refresh. 26
5.3.1.11 Unsupported messages. 26
5.3.1.12 Timers and repetitions of messages . 27
5.3.2 Radio resource control . 27
5.3.2.1 Dynamic frequency selection . 27
5.3.2.1.1 Requesting . 27
5.3.2.1.2 Reporting. 27
5.3.2.2 Handover. 28
5.3.2.2.1 Sector Handover. 28
5.3.2.2.2 Radio Handover . 28
5.3.2.2.3 Network Handover . 28
5.3.2.3 Power saving. 29
5.3.2.3.1 Sleep. 29
5.3.2.3.2 Alive. 29
5.3.2.3.2.1 Mobile originated . 29
5.3.2.3.2.2 Mobile terminated. 29
5.3.2.3.3 Absence . 30
5.3.2.4 Unsupported messages. 30
5.3.2.5 Timers and repetitions of messages . 30
5.3.3 DLC user connection. 30
5.3.3.1 Centralized mode. 30
5.3.3.1.1 Set-up . 30
5.3.3.1.1.1 Mobile originated . 30
5.3.3.1.1.2 Mobile terminated. 31
5.3.3.1.2 Release . 31
5.3.3.1.2.1 Mobile originated . 31
5.3.3.1.2.2 Mobile terminated. 31
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
5 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
5.3.3.1.3 Modify. 31
5.3.3.1.3.1 Mobile originated . 31
5.3.3.1.3.2 Mobile terminated. 31
5.3.3.1.4 Reset. 32
5.3.3.1.4.1 Mobile originated . 32
5.3.3.1.4.2 Mobile terminated. 32
5.3.3.2 Direct mode. 32
5.3.3.2.1 Set-up VOID. 32
5.3.3.2.2 Release VOID. 32
5.3.3.2.3 Modify VOID . 32
5.3.3.2.4 Relay VOID. 32
5.3.3.3 Unsupported messages. 32
5.3.3.4 Timers and repetitions of messages . 32
History .33
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
6 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Broadband Radio Access
Networks (BRAN).
The present document is sub-part 2 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN);
HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 2: Radio Link Control (RLC)
sublayer, as identified below:
Sub-part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Sub-part 2: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Sub-part 3: "Abstract Test Suite (ATS) specification".
National transposition dates
Date of adoption of this EN: 19 January 2001
Date of latest announcement of this EN (doa): 30 April 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2001
Date of withdrawal of any conflicting National Standard (dow): 31 October 2001
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
7 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
1 Scope
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN
Type 2; Data Link Control (DLC) protocol; Radio Link Control (RLC) sublayer [1].
The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment
giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2
equipment.
The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as
the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI TS 101 761-2 (V1.1.1): "Broadband Radio Access Networks (BRAN); HIPERLAN Type 2;
Data Link Control (DLC) Layer; Part 2: Radio Link Control (RLC) sublayer".
[2] ETSI ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[3] ISO/IEC 9646-1 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 1: General concepts". (See also CCITT
Recommendation X.290 (1991)).
[4] ISO/IEC 9646-2 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 2: Abstract test suite specification". (See also CCITT
Recommendation X.291 (1991)).
[5] ISO/IEC 9646-6 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 6: Protocol profile test specification".
[6] ISO/IEC 9646-7 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 7: Implementation conformance statement".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
a) the terms defined in ISO/IEC 9646-7 [6]; and
b) the definitions in TS 101 761-2 [1].
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
8 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ISO/IEC 9646-1 [3], ISO/IEC 9646-6 [5],
ISO/IEC 9646-7 [6], the abbreviations defined in TS 101 761-2 [1] apply. In particular, the following abbreviations
apply:
ACF Association Control Function
AP Access Point
APT Access Point Transceiver
ARQ Automatic Repeat Request
BCH Broadcast CHannel
BI Invalid Behaviour
BO Inopportune Behaviour
BV Valid Behaviour
CA Capability tests
CC Central Controller
CL Convergence Layer
DFS Dynamic Frequency Selection
DLC Data Link Control
DUC DLC User Connection
DCC DLC user Connection Control
DM Direct Mode
EC Error Control
IUT Implementation Under Test
IV Initialization Vector
MAC Medium Access Control
MAC ID MAC Identifier
MT Mobile Terminal
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
RLC Radio Link Control
RRC Radio Resource Control
TP Test Purposes
TSS Test Suite Structure
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 823-2-2 V1.1.1:2006
9 ETSI EN 301 823-2-2 V1.1.1 (2001-01)
4 Test suite structure
4.1 Structure
Figure 1 shows the RLC Test Suite Structure (TSS) including its subgroups defined for the conformance testing.
Test Suite Protocol group Protocol subgroup Test group
CA BV BI BO TI
RLC-AP/ RLC-MT Association control function RBCH association x
Mac ID assignment x
Link_Capability x
Encryption x
Authentication x
Common Key x
Info_Transfer x
Multicast x
Disassociation x
Key refresh x
Radio Resource Control DFS Requesting x
DFS Reporting x
Sector Handover x
Radio Handover x
Network Handover x
Sleep x
Alive x
Absence x
DLC user connection CM Set-up x
CM Release x
CM Modify x
CM Reset x
DM Set-up
DM Release
DM Modify
DM Relay
Figure 1: TSS for HIPERLAN 2 RLC
The test suite is structured as a tree with a first level defined as RLC-AP or RLC-MT representing the protocol group
"RLC for AP and RLC for MT".
4.2 Test groups
The test groups are organized in three levels. The first level creates three protocol groups representing the protocol
services. The second level separates the protocol services in functional modules. The last level in each branch contains
one or more of the standard ISO subgroups CA, BV, BI, BO and TI.
4.2.1 Protocol groups
The protocol groups identify the RLC services: Association control function, Radio resource control function, and DLC
user connection function, as defined in TS 101 761-2 [1].
4.2.1.1 Association control fun
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.