SIST EN 62271-200:2012/AC:2015
(Corrigendum)High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 61162-1:2016 is available as
RLV which contains the International Standard and its Redline
version, showing all changes of the technical content compared to
the previous edition.
IEC 61162-1:2016(E) contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series. This fifth edition cancels and replaces the fourth edition published in 2010, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new identifiers have been added to Table 4;
- the sentences CBR and MEB have been removed as they are now solely used by AIS shore based equipment;
- new sentences ACN, ALC, ALF, ARC, EPV, HCR, HRM, MOB, NSR, RLM, RRT, SM1, SM2, SM3, SM4, SMB, SPW and TRL have been added;
- revisions have been made to ABK, ABM, GNS, NAK, NRM, RMC, ROR and TTD;
- the methods of testing in Annex B have been revised.
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 200: Metallgekapselte Wechselstrom-Schaltanlagen für Bemessungsspannungen über 1 kV bis einschließlich 52 kV
Appareillage à haute tension - Partie 200: Appareillage sous enveloppe métallique pour courant alternatif de tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kV
Visokonapetostne stikalne in krmilne naprave - 200. del: Stikalne in krmilne naprave v kovinskih ohišjih za naznačene izmenične napetosti nad 1 kV in do vključno 52 kV - Popravek AC
General Information
- Status
- Withdrawn
- Publication Date
- 13-Aug-2015
- Withdrawal Date
- 04-Jul-2024
- Technical Committee
- SKA - Switchgear and control gear
- Current Stage
- 9900 - Withdrawal (Adopted Project)
- Start Date
- 05-Jul-2024
- Due Date
- 28-Jul-2024
- Completion Date
- 05-Jul-2024
Relations
- Effective Date
- 03-Aug-2021
- Effective Date
- 01-Sep-2015
Frequently Asked Questions
SIST EN 62271-200:2012/AC:2015 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV". This standard covers: IEC 61162-1:2016 is available as <a href="https://webstore.iec.ch/publication/25747">IEC 61162-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61162-1:2016(E) contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series. This fifth edition cancels and replaces the fourth edition published in 2010, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new identifiers have been added to Table 4; - the sentences CBR and MEB have been removed as they are now solely used by AIS shore based equipment; - new sentences ACN, ALC, ALF, ARC, EPV, HCR, HRM, MOB, NSR, RLM, RRT, SM1, SM2, SM3, SM4, SMB, SPW and TRL have been added; - revisions have been made to ABK, ABM, GNS, NAK, NRM, RMC, ROR and TTD; - the methods of testing in Annex B have been revised.
IEC 61162-1:2016 is available as <a href="https://webstore.iec.ch/publication/25747">IEC 61162-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61162-1:2016(E) contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series. This fifth edition cancels and replaces the fourth edition published in 2010, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new identifiers have been added to Table 4; - the sentences CBR and MEB have been removed as they are now solely used by AIS shore based equipment; - new sentences ACN, ALC, ALF, ARC, EPV, HCR, HRM, MOB, NSR, RLM, RRT, SM1, SM2, SM3, SM4, SMB, SPW and TRL have been added; - revisions have been made to ABK, ABM, GNS, NAK, NRM, RMC, ROR and TTD; - the methods of testing in Annex B have been revised.
SIST EN 62271-200:2012/AC:2015 is classified under the following ICS (International Classification for Standards) categories: 29.130.10 - High voltage switchgear and controlgear. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 62271-200:2012/AC:2015 has the following relationships with other standards: It is inter standard links to SIST EN IEC 62271-200:2021, SIST EN 62271-200:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 62271-200:2012/AC:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 200: Metallgekapselte Wechselstrom-Schaltanlagen für Bemessungsspannungen über 1 kV bis einschließlich 52 kVAppareillage à haute tension - Partie 200: Appareillage sous enveloppe métallique pour courant alternatif de tensions assignées supérieures à 1 kV et inférieures ou égales à 52 kVHigh-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV29.130.10Visokonapetostne stikalne in krmilne napraveHigh voltage switchgear and controlgearICS:Ta slovenski standard je istoveten z:EN 62271-200:2012/AC:2015SIST EN 62271-200:2012/AC:2015en,fr01-september-2015SIST EN 62271-200:2012/AC:2015SLOVENSKI
STANDARD
IEC 62271-200:2011/COR1:2015 – 1 –
IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE I
...
記事のタイトル: SIST EN 62271-200:2012/AC:2015 - 高電圧のスイッチギアおよび制御ギア - パート200: 定格電圧が1kV以上52kV以下のACメタルエンクロージャのスイッチギアおよび制御ギア 記事の内容: IEC 61162-1:2016は<a href="https://webstore.iec.ch/publication/25747">IEC 61162-1:2016 RLV</a>として利用可能であり、これには前版との技術的内容の変更を示す国際基準とレッドラインバージョンが含まれています。 IEC 61162-1:2016(E)は、適切なシステムを介して連携された場合に、海洋電子機器、航法および無線通信機器間のデータ通信要件を規定しています。このIEC 61162の一部は、シングルトーカーから複数のリスナーに対するワンウェイのシリアルデータ転送をサポートすることを目的としています。これらのデータは印字可能なASCII形式であり、位置、速度、深さ、周波数割り当てなどの情報を含む場合があります。通常、メッセージは11文字から最大79文字までの長さであり、一般的には1秒あたり1回のメッセージの送信が必要です。この標準では、レーダーや映像、データベース、ファイル転送などの高帯域幅のアプリケーションには対応しておらず、メッセージの確実な配信や限定的なエラーチェック機能のみが提供されていますので、安全性のあるアプリケーションでは慎重に使用する必要があります。より高速な転送速度が必要な場合は、IEC 61162-2を参照する必要があります。自動識別システム（AIS）の陸上設備に関する応用プログラムの場合は、IEC 62320シリーズを参照する必要があります。この第5版は、2010年に発行された第4版を置き換え、技術的な改訂が含まれています。この版では、以下の主な技術的変更が前版と比較して含まれています： - 表4に新しい識別子が追加されました。 - CBRおよびMEBのセンテンスは、AISの陸上設備のみで使用されるように削除されました。 - ACN、ALC、ALF、ARC、EPV、HCR、HRM、MOB、NSR、RLM、RRT、SM1、SM2、SM3、SM4、SMB、SPW、およびTRLという新しいセンテンスが追加されました。 - ABK、ABM、GNS、NAK、NRM、RMC、ROR、およびTTDに対して改訂がされました。 - 付録Bのテスト方法が改訂されました。
제목: SIST EN 62271-200:2012/AC:2015 - 고전압 스위치기어 및 제어기어 - 파트 200: 1 kV 이상 52 kV 이하의 정격 전압용 AC 금속외장 스위치기어 및 제어기어 내용: IEC 61162-1:2016은 <a href="https://webstore.iec.ch/publication/25747">IEC 61162-1:2016 RLV</a>으로 사용 가능하며, 이는 이전 판과 비교하여 기술 내용의 모든 변경 사항을 보여주는 국제 표준 및 레드라인 버전을 포함하고 있습니다. IEC 61162-1:2016(E)는 적절한 시스템을 통해 연결된 경우 해상 전자 기기, 항법 및 무선 통신 장비 간의 데이터 통신 요구 사항을 포함하고 있습니다. IEC 61162의 이 부분은 한 개의 발화자로부터 한 개 이상의 청취자로의 일방향 직렬 데이터 전송을 지원하기 위한 것입니다. 이러한 데이터는 인쇄 가능한 ASCII 형식이며 위치, 속도, 깊이, 주파수 할당 등과 같은 정보를 포함할 수 있습니다. 일반적으로 메시지는 길이가 11자에서 최대 79자까지이며 일반적으로 1초당 메시지 하나 이하로 전송되어야 합니다. 이 표준에서는 레이더나 비디오 이미지, 데이터베이스 또는 파일 전송과 같은 고대역폭 응용프로그램을 지원하지 않기 때문에 전기적인 정의는 이에 맞추어져 있지 않습니다. 메시지의 보장된 전달이나 제한된 오류 확인 기능만 제공하며, 이 표준은 모든 안전 응용의 경우에는 주의해서 사용되어야 합니다. 더 빠른 전송 속도가 필요한 경우에는 IEC 61162-2를 참조해야 합니다. 자동식별시스템(AIS)의 육상 장비에 대한 응용 프로그램의 경우, IEC 62320 시리즈를 참조해야 합니다. 이 다섯 번째 판은 2010년에 발표된 네 번째 판을 대체하며 기술 개정을 포함하고 있습니다. 이번 판에는 다음과 같은 중요한 기술적 변경 사항이 포함되어 있습니다: - 제 4 표에 새로운 식별자가 추가되었습니다. - CBR 및 MEB 문장이 AIS 육상 장비에서만 사용되도록 제거되었습니다. - ACN, ALC, ALF, ARC, EPV, HCR, HRM, MOB, NSR, RLM, RRT, SM1, SM2, SM3, SM4, SMB, SPW 및 TRL과 같은 새로운 문장들이 추가되었습니다. - ABK, ABM, GNS, NAK, NRM, RMC, ROR 및 TTD에 대한 개정이 이루어졌습니다. - 부록 B의 시험 방법이 개정되었습니다.
The article discusses the IEC 61162-1:2016 standard, which specifies the requirements for data communication between maritime electronic instruments, navigation, and radiocommunication equipment. The standard supports one-way serial data transmission from a single sender to one or more receivers. The data is in printable ASCII form and can include information like position, speed, depth, and frequency allocation. The standard does not accommodate high-bandwidth applications or guarantee message delivery. It should be used with caution in safety applications. The article also mentions that the fifth edition of the standard includes several technical changes and revisions.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...