SIST EN 846-9:2016
(Main)Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
This European Standard specifies methods for determining the flexural and shear resistances and load deflection characteristics of single span, single or composite lintels used for supporting uniformly distributed loads over openings in masonry construction.
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege- und Schubwiderstandsfähigkeit von Stürzen
Diese Europäische Norm legt Verfahren zur Bestimmung der Biegezugfestigkeit und des Schubwiderstands sowie der Last-Verformungseigenschaften von vorgefertigten oder teilweise vorgefertigten, bauseits ergänzten Einfeldstürzen fest, die zur Abtragung von gleichmäßig verteilten Lasten über Öffnungen im Mauerwerksbau verwendet werden.
Méthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination de la résistance à la flexion et de la résistance au cisaillement des linteaux
La présente Norme européenne spécifie les méthodes de détermination des résistances à la flexion et au cisaillement des linteaux simples, composites ou à portée simple, utilisés pour supporter des charges réparties uniformément au-dessus d'ouvertures pratiquées dans la construction en maçonnerie.
Metode preskušanja dodatnih komponent zidovja - 9. del: Ugotavljanje upogibne in strižne nosilnosti preklad
Ta evropski standard določa metode za določevanje upogibne in strižne odpornosti ter lastnosti upogibanja pod obremenitvijo posameznih obokanih, enotnih ali sestavljenih preklad, ki se uporabljajo za podporo za enakomerno porazdeljena bremena prek odprtin v zidanih konstrukcijah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 846-9:2016
01-junij-2016
1DGRPHãþD
SIST EN 846-9:2001
Metode preskušanja dodatnih komponent zidovja - 9. del: Ugotavljanje upogibne in
strižne nosilnosti preklad
Methods of test for ancillary components for masonry - Part 9: Determination of flexural
resistance and shear resistance of lintels
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege-
und Schubwiderstandsfähigkeit von Stürzen
Méthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination
de la résistance à la flexion et de la résistance au cisaillement des linteaux
Ta slovenski standard je istoveten z: EN 846-9:2016
ICS:
91.080.30 Zidane konstrukcije Masonry
SIST EN 846-9:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 846-9:2016
---------------------- Page: 2 ----------------------
SIST EN 846-9:2016
EN 846-9
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2016
EUROPÄISCHE NORM
ICS 91.060.10; 91.080.30 Supersedes EN 846-9:2000
English Version
Methods of test for ancillary components for masonry -
Part 9: Determination of flexural resistance and shear
resistance of lintels
Méthodes d'essai des composants accessoires de Prüfverfahren für Ergänzungsbauteile für Mauerwerk -
maçonnerie - Partie 9: Détermination de la résistance à Teil 9: Bestimmung der Biege- und
la flexion et de la résistance au cisaillement des Schubwiderstandsfähigkeit von Stürzen
linteaux
This European Standard was approved by CEN on 3 January 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 846-9:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 846-9:2016
EN 846-9:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Principle . 4
4 Symbols . 4
5 Materials . 4
5.1 Structural shell casing units . 4
5.2 Composite lintels . 4
6 Apparatus . 4
7 Sampling . 5
8 Procedure. 5
8.1 General . 5
8.2 Method of support . 5
8.3 Conditioning of lintels finished in situ . 5
8.4 Lateral restraint or composite action . 5
8.5 Loading. 5
8.5.1 General requirements . 5
8.5.2 Flexural resistance . 5
8.5.3 Shear resistance. 6
8.5.4 Deflection monitoring . 6
8.6 Test procedure for single, composite and combined lintels . 6
8.6.1 Flexural resistance . 6
8.6.2 Shear resistance. 6
9 Expression of result . 6
10 Evaluation of results . 7
11 Test report . 7
Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN 846-9:2016
EN 846-9:2016 (E)
European foreword
This document (EN 846-9:2016) has been prepared by Technical Committee CEN/TC 125 “Masonry”,
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 846-9:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
Provision has been made in this standard for the restraint of ‘L’ shape lintels against excessive torsion
during testing.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 846-9:2016
EN 846-9:2016 (E)
1 Scope
This European Standard specifies methods for determining the flexural and shear resistan
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metode preskušanja dodatnih komponent zidovine - 9. del: Ugotavljanje upogibne in strižne nosilnosti prekladPrüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege- und Schubwiderstandsfähigkeit von StürzenMéthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination de la résistance à la flexion et de la résistance au cisaillement des linteauxMethods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels91.080.30Zidane konstrukcijeMasonryICS:Ta slovenski standard je istoveten z:FprEN 846-9 revkSIST FprEN 846-9:2015en,fr,de01-september-2015kSIST FprEN 846-9:2015SLOVENSKI
STANDARD
kSIST FprEN 846-9:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 846-9
July 2015 ICS 91.060.10; 91.080.30 Will supersede EN 846-9:2000English Version
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
Méthodes d'essai des composants accessoires de maçonnerie - Partie 9: Détermination de la résistance à la flexion et de la résistance au cisaillement des linteaux
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 9: Bestimmung der Biege- und Schubwiderstandsfähigkeit von Stürzen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 125.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 846-9:2015 EkSIST FprEN 846-9:2015
FprEN 846-9:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Principle .4 4 Symbols .4 5 Materials .4 5.1 Structural shell casing units .4 5.2 Composite lintels .4 6 Apparatus .4 7 Sampling .5 8 Procedure .5 8.1 General .5 8.2 Method of support .5 8.3 Conditioning of lintels finished in situ .5 8.4 Lateral restraint or composite action .5 8.5 Loading .5 8.5.1 General requirements .5 8.5.2 Flexural resistance .5 8.5.3 Shear resistance .6 8.5.4 Deflection monitoring .6 8.6 Test procedure for single, composite and combined lintels .6 8.6.1 Flexural resistance .6 8.6.2 Shear resistance .6 9 Expression of result .6 10 Evaluation of results .7 11 Test report .7 Bibliography . 10
kSIST FprEN 846-9:2015
FprEN 846-9:2015 (E) 3 Foreword This document (FprEN 846-9:2015) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This document is currently submitted to the Unique Acceptance Procedure. This document will replace EN 849-9:2000. Provision has been made in this Standard for the restraint of ‘L’ shape lintels against excessive torsion during testing. kSIST FprEN 846-9:2015
FprEN 846-9:2015 (E) 4 1 Scope This European Standard specifies methods for determining the flexural and shear resistances and load deflection characteristics of single span, single or composite lintels used for supporting uniformly distributed loads over openings in masonry construction. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.