Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009)

This International Standard describes objectives, functional requirements and guidelines for emergency response (ER) measures on installations used for the development of offshore hydrocarbon resources. It is applicable to fixed offshore structures or floating production, storage and off-take systems.

Erdöl- und Erdgasindustrie - Offshore-Produktionsanlagen - Anforderungen und Richtlinien für Notfallmaßnahmen (ISO 15544:2000 + Amd 1:2009)

Diese Internationale Norm beschreibt Ziele, funktionale Anforderungen und Richtlinien für Notfallmaßnahmen
auf Offshore-Anlagen, die der Erschließung von Kohlenwasserstofflagerstätten dienen. Die Norm ist auf
feststehende Offshore-Konstruktionen oder auf schwimmende Förder-, Speicher- und Übergabesysteme
anwendbar.
ANMERKUNG Für mobile Offshore-Anlagen sind die Notfallpläne, die nach den Anforderungen und Empfehlungen der
internationalen Seeschifffahrtsorganisation (International Maritime Organization, IMO) erstellt wurden, im Allgemeinen für
den Normalbetrieb einer unabhängigen Anlage an den meisten Standorten ausreichend. Die folgenden Aspekte der
Notfallplanung werden im Allgemeinen von der IMO nicht angesprochen; sie sollten besonders betrachtet werden:
⎯ Bereichsevakuierung, z. B. vorbeugende Evakuierung in Bereichen mit tropischen Wirbelstürmen;
⎯ Kombinierter Betrieb, für die ein integriertes Befehls- und Notfall-System entwickelt werden sollte;
⎯ Arbeiten unter arktischen Bedingungen;
⎯ unkontrollierter Zufluss von einem Bohrloch.

Industries du pétrole et du gaz naturel - Installations de production en mer - Exigences et lignes directrices pour les interventions d'urgence (ISO 15544:2000, y compris Amd 1:2009)

La présente Norme internationale décrit les objectifs, les exigences fonctionnelles et les lignes directrices en
matière de mesures d'intervention d'urgence pour les installations utilisées pour le développement des ressources
d'hydrocarbures en mer. De telles installations peuvent être des structures en mer fixes ou des systèmes flottants
de production, de stockage et d'enlèvement.
NOTE Pour les unités en mer mobiles, les plans d'intervention d'urgence élaborés conformément aux exigences et
recommandations de l'International Maritime Organisation (IMO) sont généralement appropriés pour l'exploitation normale, et
indépendante de l'unité pour la plupart des lieux. Les aspects suivants de la planification d'intervention d'urgence ne sont
généralement pas traités par l'IMO, il convient par conséquent de leur prêter une attention particulière:
_ l'évacuation d'une zone, par exemple l'évacuation préventive dans des zones sujettes à des cyclones tropicaux;
_ les activités simultanées pour lesquelles il convient de développer un système d'intervention d'urgence et de
commandement intégré;
_ les opérations en zones arctiques; et
_ le débit incontrôlé d'un puits.

Industrija za predelavo nafte in zemeljskega plina - Plavajoči proizvodni objekti - Zahteve in smernice za ukrepanje v nujnih primerih (ISO 15544:2000, vključno z Amd 1:2009)

Ta mednarodni standard opisuje cilje, funkcionalne zahteve in smernice za ukrepanje v nujnih primerih na objektih, ki se uporabljajo za razvoj ogljikovodikovih virov na morju. Uporablja se za fiksne objekte na morju ali plavajoče sisteme za proizvodnjo, shranjevanje in odjem.

General Information

Status
Withdrawn
Public Enquiry End Date
04-Jan-2010
Publication Date
05-Apr-2010
Withdrawal Date
20-Jun-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Jun-2024
Due Date
13-Jul-2024
Completion Date
21-Jun-2024

Relations

Buy Standard

Standard
EN ISO 15544:2010
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 15544:2009
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15544:2010
01-maj-2010
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3ODYDMRþLSURL]YRGQLREMHNWL
=DKWHYHLQVPHUQLFH]DXNUHSDQMHYQXMQLKSULPHULK ,62YNOMXþQR]
$PG
Petroleum and natural gas industries - Offshore production installations - Requirements
and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009)
Industries du pétrole et du gaz naturel - Installations de production en mer - Exigences et
lignes directrices pour les interventions d'urgence (ISO 15544:2000, y compris Amd
1:2009)
Ta slovenski standard je istoveten z: EN ISO 15544:2010
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
SIST EN ISO 15544:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15544:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 15544:2010


EUROPEAN STANDARD
EN ISO 15544

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2010
ICS 75.180.10
English Version
Petroleum and natural gas industries - Offshore production
installations - Requirements and guidelines for emergency
response (ISO 15544:2000, including Amd 1:2009)
Industries du pétrole et du gaz naturel - Installations de
production en mer - Exigences et lignes directrices en
matière d'intervention d'urgence (ISO 15544:2000, y
compris Amd 1:2009)
This European Standard was approved by CEN on 11 February 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15544:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15544:2010
EN ISO 15544:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15544:2010
EN ISO 15544:2010 (E)
Foreword
The text of ISO 15544:2000, including Amd 1:2009 has been prepared by Technical Committee ISO/TC 67
“Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 15544:2010 by
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2010, and conflicting national standards shall be
withdrawn at the latest by September 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
Users of this EN, prepared in the field of application of Article 137 of the EU Treaty, should be aware that
standards have no formal legal relationship with Directives, which may have been made under Article 137 of
the Treaty. In addition, national legislation in the Member states may contain more stringent requirements than
the minimum requirements of a Directive based on Article 137. Information on the relationship between the
national legislation implementing Directives based on Article 137 and this EN may be given in a national
foreword of the national standard implementing this EN.“
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi
...

SLOVENSKI STANDARD
kSIST FprEN ISO 15544:2009
01-december-2009
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3ODYDMRþLSURL]YRGQLREMHNWL
=DKWHYHLQVPHUQLFH]DXNUHSDQMHYQXMQLKSULPHULK ,62YNOMXþQR]
$PG
Petroleum and natural gas industries - Offshore production installations - Requirements
and guidelines for emergency response (ISO 15544:2000, including Amd 1:2009)
Industries du pétrole et du gaz naturel - Installations de production en mer - Exigences et
lignes directrices pour les interventions d'urgence (ISO 15544:2000, y compris Amd
1:2009)
Ta slovenski standard je istoveten z: FprEN ISO 15544
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
kSIST FprEN ISO 15544:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 15544:2009

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 15544:2009


EUROPEAN STANDARD
FINAL DRAFT
FprEN ISO 15544
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2009
ICS 75.180.10
English Version
Petroleum and natural gas industries - Offshore production
installations - Requirements and guidelines for emergency
response (ISO 15544:2000, including Amd 1:2009)
Industries du pétrole et du gaz naturel - Installations de
production en mer - Exigences et lignes directrices pour les
interventions d'urgence (ISO 15544:2000, y compris Amd
1:2009)
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 12.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN ISO 15544:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 15544:2009
FprEN ISO 15544:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 15544:2009
FprEN ISO 15544:2009 (E)
Foreword
The text of ISO 15544:2000, including Amd 1:2009, has been prepared by Technical Committee ISO/TC 67
“Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as FprEN ISO 15544:2009 by
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
Users of this EN, prepared in the field of application of Article 137 of the EU Treaty, should be aware that
standards have no formal legal relationship with Directives which may have been made under Article 137 of
the Treaty. In addition, national legislation in the Member states may contain more stringent requirements than
the minimum requirements of a Directive based on Article 137. Information on the relationship between the
national legislation implementing Directives based on Article 137 and this EN may be given in a national
foreword of the national standard implementing this EN.“
Endorsement notice
The text of ISO 15544:2000, including Amd 1:2009 has been approved by CEN as a FprEN ISO 15544:2009
without any modification.

3

---------------------- Page: 5 ----------------------
kSIST FprEN ISO 15544:2009

---------------------- Page: 6 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.