SIST EN 61850-4:2011/A1:2021
(Amendment)Communication networks and systems for power utility automation - Part 4: System and project management
Communication networks and systems for power utility automation - Part 4: System and project management
Kommunikationsnetze und -systeme in Stationen - Teil 4: System- und Projektverwaltung
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques - Partie 4: Gestion du système et gestion de projet
Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije - 4. del: Sistemsko in projektno upravljanje - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61850-4:2011/A1:2021
01-februar-2021
Komunikacijska omrežja in sistemi za avtomatizacijo porabe električne energije -
4. del: Sistemsko in projektno upravljanje - Dopolnilo A1
Communication networks and systems for power utility automation - Part 4: System and
project management
Kommunikationsnetze und -systeme in Stationen - Teil 4: System- und Projektverwaltung
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques
- Partie 4: Gestion du système et gestion de projet
Ta slovenski standard je istoveten z: EN 61850-4:2011/A1:2020
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST EN 61850-4:2011/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61850-4:2011/A1:2021
---------------------- Page: 2 ----------------------
SIST EN 61850-4:2011/A1:2021
EUROPEAN STANDARD EN 61850-4:2011/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2020
ICS 33.200
English Version
Communication networks and systems for power utility
automation - Part 4: System and project management
(IEC 61850-4:2011/A1:2020)
Réseaux et systèmes de communication pour Kommunikationsnetze und -systeme für die
l'automatisation des systèmes électriques - Partie 4: Automatisierung in der elektrischen Energieversorgung -
Gestion du système et gestion de projet Teil 4: System- und Projektverwaltung
(IEC 61850-4:2011/A1:2020) (IEC 61850-4:2011/A1:2020)
This amendment A1 modifies the European Standard EN 61850-4:2011; it was approved by CENELEC on 2020-12-08. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61850-4:2011/A1:2020 E
---------------------- Page: 3 ----------------------
SIST EN 61850-4:2011/A1:2021
EN 61850-4:2011/A1:2020 (E)
European foreword
The text of document 57/2256/FDIS, future IEC 61850-4/A1, prepared by IEC/TC 57 "Power systems
management and associated information exchange" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 61850-4:2011/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-12-08
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61850-4:2011/A1:2020 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61850-4:2011/A1:2021
EN 61850-4:2011/A1:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Replace the existing reference to IEC 61850-6 with the following reference:
Publication Year Title EN/HD Year
IEC 61850-6 - Communication networks and systems for EN 61850-6 -
power utility automation - Part 6: Configuration
description language for communication in
electrical substations related to IEDs
Delete the references to IEC 81346-1 and IEC 81346-2.
3
---------------------- Page: 5 ----------------------
SIST EN 61850-4:2011/A1:2021
---------------------- Page: 6 ----------------------
SIST EN 61850-4:2011/A1:2021
IEC 61850-4
®
Edition 2.0 2020-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Communication networks and systems for power utility automation –
Part 4: System and project management
Réseaux et systèmes de communication pour l'automatisation des systèmes
électriques –
Partie 4: Gestion du système et gestion de projet
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.200 ISBN 978-2-8322-8925-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61850-4:2011/A1:2021
– 2 – IEC 61850-4:2011/AMD1:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 57: Power systems 2 manage-
ment and associated information exchange.
The text of this amendment is based on the following documents:
FDIS Report on voting
57/2256/FDIS 57/2271/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under "http://web-
store.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
_____________
---------------------- Page: 8 ----------------------
SIST EN 61850-4:2011/A1:2021
IEC 61850-4:2011/AMD1:2020 – 3 –
© IEC 2020
1 Scope
Replace the existing text of the first paragraph of the scope with the following new text:
This part of IEC 61850 applies to projects associated with processes near automation systems
of power utilities (UAS, utility automation system), such as substation automation systems
(SAS). It defines the system and project management for UAS with communication between
intelligent electronic devices (IEDs) in the substation respective plant and the related system
requirements.
2 Normative references
Replace the existing reference to IEC 61850-6 with the following new reference:
IEC 61850-6, Communication networks and systems for power utility automation – Part 6: Con-
figuration description language for communication in power utility automation systems related
to IEDs
Delete the references to IEC 81346-1 and IEC 81346-2.
4 Abbreviations
Add the following new abbreviations:
icd IED capability description file
ICT IED configuration tool
iid instantiated IED description file
scd substation configuration description file
SCT system configuration tool
sed system exchange description file
ssd system specification description file
5 Engineering requirements
5.3.4 IED configuration tool
Replace the existing text of the fifth paragraph of 5.3.4 with the following new text:
The tool’s data input module supports the interactive input of parameters as well as the import
of the system description as created by means of the system configuration tool. The structure
of input data should be technically oriented towards the process architecture, i.e. structured
according to the hierarchical approach to substation, voltage level, bay, equipment and function.
Replace the existing text of the first bullet with the following new text:
– process (e.g. substation or line) identification;
Add the following new subclause after 5.3.5:
5.3.6 Engineering tool workflow
5.3.6.1 From system specification to project description
Typical use case: one centralised SCT working with several ICT (see Figure 12).
---------------------- Page: 9 ----------------------
SIST EN 61850-4:2011/A1:2021
– 4 – IEC 61850-4:2011/AMD1:2020
© IEC 2020
Figure 12 – Engineering workflow steps from system to project
Step 1: System Specification Tool (SST) creates an ssd file according to IEC 61850-6.
Step 2a: IED Configurator Tool (ICT) creates an icd file according to IEC 61850-6.
Step 2b: ICT creates an iid file according to part 6.
Step 3: System Configuration Tool (SCT) creates an scd file, using previous files: ssd, icd
and/or iid.
Step 4: This SCD is used by an ICT to finalize configuration and publish an cid file to its related
IED (configuration of dataflow).
The fourth step is the last except if the scd contents requires modifications from the
ICT, which shall be transferred to the SCT in order to publish a updated scd. Then it
is replaced by step 5 hereafter.
Step 5: ICT updates the IED description based on the further IED configuration needs and on
system configuration needs provided by SCT in step 3. The ICT exports to the SCT
the updated configuration description via the iid file.
Step 6: SCT publishes a updated scd file taking into account information described by previous
IID.
Step 7: ICT publishes the updated cid file to send to the IED, using the scd published on step 6.
5.3.6.2 Change of system tool
Use case: considering an SCT A has to be replaced by an SCT B. The context is transferred
with an scd exported from the SCT A.
The creation of the project with SCT A is similar to the previous use case and is
assumed to be done before the replacement of SCT A as classical project engineer-
ing as shown in Figure 13.
NOTE Changing an SCT is always done with the purpose of updating / upgrading the system configuration with
features that previous SCT does not support.
---------------------- Page: 10 ----------------------
SIST EN 61850-4:2011/A1:2021
IEC 61850-4:2011/AMD1:2020 – 5 –
© IEC 2020
Figure 13 – Change of system tool first stage
Step 1: System Specification Tool (SST) creates an ssd.
Step 2a: IED Configurator Tool (ICT) creates an icd.
Step 2b: ICT creates an iid as a first instantiation.
Step 3: SCT creates an scd, using previous files: ssd, icd and iid.
Step 4: ICTs create iid using the scd issued on step 3.
Step 5: SCT publishes a new scd taking into account information described by previous iid.
Hereafter the second stage, the SCT B uses the scd provided by the SCT A as shown in
Figure 14.
Figure 14 – Change of system tool second stage
Step 6: SCD to be transferred by SCT A to SCT B. Even if that does not appear on the
scheme, it is strongly recommended to also transfer the latest version of all icd files.
Step 7: SCT B updates the scd, using previous scd created by SCT A (previous step).
Step 8: ICTs create iid using the scd issued on step 7.
Step 9: SCT publishes a new scd.
---------------------- Page: 11 ----------------------
SIST EN 61850-4:2011/A1:2021
– 6 – IEC 61850-4:2011/AMD1:2020
© IEC 2020
Step 10: ICTs create cid using the scd previously created.
5.3.6.3 Interaction between projects
Use case: considering 2 different configuration projects managed by 2 SCT A and B (The
2 configuration projects may cover one or multiple UAS). One IED (e.g. IED 2)
regards both projects. The cid intended to the IED 2 shall take into account both
contexts. The final step is the publishing of the cid.
Hereafter, the first stage consists of the publishing of the SCD, as shown in Figure 15.
Figure 15 – interaction between projects, first stage
Step 1: System Specification Tool (SST) creates an ssd.
Step 2a: IED 1 Configurator Tool creates an icd.
Step 2b: IED 2 Configuration Tool creates an iid as a first instantiation.
Step 3: SCT creates an SCD 1+2, describing both IED 1 and IED 2 and using previous files:
ssd, icd and iid.
Step 4: ICTs create iid using the scd issued on step 3.
Step 5: SCT publishes a new scd 1+2 taking into account information described by previous
IID.
Hereafter, the second stage consists in using part of the scd 1+2, that is involved in the com-
munication of a second project, as shown in Figure 16.
---------------------- Page: 12 ----------------------
SIST EN 61850-4:2011/A1:2021
IEC 61850-4:2011/AMD1:2020 – 7 –
© IEC 2020
Figure 16 – interaction between projects, second stage
Step 6: SCT A creates an sed 2r, which gives only required information on the IED 2 needed
for the engineering of the second project. (therefore “reduced IED 2”)
Step 7: SCT B creates an scd 3+4+2r’, using the sed 2r created by sct A (previous step) and
taking into account its own context.
Step 8: ICTs create iid using the scd 3+4+2r’.
Step 9: SCT B creates a new sed 2r’ taking into account IED 2 in the SCT B context.
Step 10: SCT A creates a new scd 1+2’ using the sed 2r’ to integrate dataflow modifications of
IED 2 coming from the sct B.
Step 11: ICTs create cid using the scd previously created.
5.5 Scalability
Replace the existing text of the first bullet with the following new text:
– task (transmission/distribution/power plant/DER/… networks) and voltage range (medium,
high or ultra high voltage) of the substation;
5.7 Standard documentation
Replace the existing text of the first paragraph with the following new text:
The standard documentation is the description of the device and the functions of one IED or the
UAS product family of a manufacturer which is universally valid and which is not changed for
purposes of specific projects (refer to CIGRE – TB628 – Documentation requirements through-
out the lifecycle of Digital Substation Automation Systems – B5-39).
---------------------- Page: 13 ----------------------
SIST EN 61850-4:2011/A1:2021
– 8 – IEC 61850-4:2011/AMD1:2020
© IEC 2020
Add the following new text after 5.8:
5.9 System testing and engineering
Functional testing of the system, especially for maintenance testing, but also during FAT and
SAT, requires the preparation of the system configuration to support testing.
The testing concept must be defined by the user at an early stage of the project, since this
comes with additional requirements impacting the system design and configuration, see
IEC 61850-10-3.
6 System life cycle
6.1 Requirements of product versions
Replace the existing text of 6.1 with the following new text:
The life cycles of an UAS and its IEDs are subject to differences of the manufacturer’s and the
customer’s point of view, as shown in Figure 17:
– the manufacturer’s product life cycle contains the period between the start of production
and the discontinuation of the UAS product family;
– the customer’s system life cycle contains the period between the site commissioning of the
first system installation, often based on several UAS product families, and the decommis-
sioning of the latest system installation. The system installation may be carried out by a
system integrator who is different from the product manufacturer.
Figure 17 – Two meanings of the system life cycle
During the life cycle of the UAS and its IEDs, a number of changes and extensions are required
for various reasons:
– functional improvements and extensions;
– technology changes in the hardware;
---------------------- Page: 14 ----------------------
SIST EN 61850-4:2011/A1:2021
IEC 61850-4:2011/AMD1:2020 – 9 –
© IEC 2020
– correction of recognized problems.
These changes can lead updating IED versions of hardware, software or even engineering tools.
Different use cases are identified and developed later (ref. backward compatibility).
Whatever the use case, the manufacturer is obliged to provide identificati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.