Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws

Work incorporated in IEC 60745-2-5:200X (61F/643/FDIS) / prEN 60745-2-5:200X (pr=16378) * Standstill maintained

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-5: Besondere Anforderungen für Kreissägen

Outils électroportatifs à moteur - Sécurité -- Partie 2-5: Règles particulières pour les scies circulaires

Varnost električnih ročnih orodij - 2-5. del: Posebne zahteve za krožne žage

General Information

Status
Not Published
Publication Date
31-Mar-2004
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
08-Jan-2009
Due Date
13-Jan-2009
Completion Date
09-Jan-2009

Relations

Buy Standard

Draft
EN 60745-2-5:2003/OprA2:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60745-2-
5:2003/OprA2:2004

STANDARD
april 2004
Varnost električnih ročnih orodij - 2-5. del: Posebne zahteve za krožne žage
Safety of hand-held motor-operated electric tools – Part 2-5: Particular requirements
for circular saws
ICS 25.140.20 Referenčna številka
SIST EN 60745-2-
5:2003/OprA2:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

61F/561/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)

Project number IEC 60745-2-5-A2 Ed. 3.0
Numéro de projet
IEC/TC or SC: Date of circulation Closing date for voting (Voting mandatory
SC 61F
Date de diffusion for P-members)
CEI/CE ou SC:

Date de clôture du vote (Vote obligatoire
2004-01-23
pour les membres (P))
2004-06-25
Titre du CE/SC:    TC/SC Title: Safety of hand-held motor-operated
electric tools.
Secretary: Robert G. Stoll, USA
Secrétaire:
Also of interest to the following committees Supersedes document
Intéresse également les comités suivants Remplace le document
   61F/545/CD and 61F/555A/CC
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE MODIFICATION. THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À PRÉSENTER, RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES DROITS DE PROPRIÉTÉ COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
DONT ILS AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À FOURNIR UNE THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
DOCUMENTATION EXPLICATIVE.



Titre :    Title: IEC 60745-2-5-A2 Ed 3.0: Safety of hand-held
motor-operated electric tools – Part 2-5: Particular

requirements for circular saws.



Note d'introduction Introductory note


ATTENTION ATTENTION

CDV soumis en parallèle au vote (CEI) Parallel IEC CDV/CENELEC Enquiry
et à l’enquête (CENELEC)

Copyright © 2004 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or
any part of it, for any other purpose without permission in writing from IEC.


FORM CDV (IEC)
2002-05-14

---------------------- Page: 2 ----------------------

60745-2-5 Amend 2/Ed 3.0/CDV © IEC
2
Add after clause 19.1:
19.3 This subclause is not applicable.

Replace the existing clause 19.101 by the following:
19.101 Guarding above the guide plate
19.101.1 The blade above the guide plate shall be guarded by the upper guard.
19.101.2 Apertures in the guarding system above the guide plate, unless otherwise specified
below, shall be designed such that the test probe ‘a’ of Figure 105, when inserted at any angle and
to the depth allowed by its stop, shall not be able to contact the cutting edge zone of any
recommended blade.
19.101.2.1 On the motor side of the upper guard, adjacent to the cutting edge zone at the front of
the blade an aperture may be provided for viewing the line of the cut. This viewing aperture shall
either meet the requirements of 19.101.2, as illustrated in Figure 106, or it shall be limited by
proximity and height restrictions.
ƒ Proximity restriction
The straight line distance from a defined measuring point on the auxiliary handle surface to the
cutting edge zone of any recommended blade shall be a minimum of 120 mm as shown in Figure
107. If there is no auxiliary handle provided, the distance shall be measured from the motor casing.
Compliance is checked by the following measurements, which shall be conducted with the guide
plate set to any depth of cut and 90°.
To establish the measuring point on the auxiliary handle or the motor casing, follow the procedure
outlined below.
a) Establish the closest (A) and the most distant (B) points on the auxiliary handle or motor casing
from the blade. For the motor casing, the closest (A) point to the blade is assumed to be in the
plane of the main handle farthest from the blade. Equidistant between points (A) and (B), but
not more than 45 mm away from point (A), draw the vertical intersecting line of the plane
parallel with the blade and the surface of the auxiliary handle or motor casing, as applicable.
b) Establish the closest (C) and the most distant (D) point from the plane of the guide plate on the
auxiliary handle o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.