SIST-TS CLC IEC/TS 61980-3:2020
(Main)Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems
Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems
This part of IEC 61980 series, (in a first step as Technical Specification for three-year period) applies to the equipment for the magnetic field-wireless power transfer (MF-WPT) of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in an operational state when connected to the supply network, at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.This standard also applies to MF-WPT equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.
Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 3: Spezifische Anforderungen für die kontaktlosen Energieübertragungssysteme mit Magnetfeld
Systèmes de transport d'énergie sans fil pour véhicules électriques - Partie 3 : Exigences spécifiques relatives aux systèmes de transport d'énergie sans fil à base de champs magnétiques
Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 3. del: Posebne zahteve za sistem brezžičnega prenosa energije z magnetnim poljem
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CLC IEC/TS 61980-3:2020
01-september-2020
Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 3. del:
Posebne zahteve za sistem brezžičnega prenosa energije z magnetnim poljem
Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for
the magnetic field wireless power transfer systems
Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 3:
Spezifische Anforderungen für die kontaktlosen Energieübertragungssysteme mit
Magnetfeld
Systèmes de transport d'énergie sans fil pour véhicules électriques - Partie 3 : Exigences
spécifiques relatives aux systèmes de transport d'énergie sans fil à base de champs
magnétiques
Ta slovenski standard je istoveten z: CLC IEC/TS 61980-3:2020
ICS:
43.120 Električna cestna vozila Electric road vehicles
SIST-TS CLC IEC/TS 61980-3:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
---------------------- Page: 2 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
TECHNICAL SPECIFICATION CLC IEC/TS 61980-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2020
ICS 43.120
English Version
Electric vehicle wireless power transfer (WPT) systems - Part 3:
Specific requirements for the magnetic field wireless power
transfer systems
(IEC/TS 61980-3:2019)
Systèmes de transfert de puissance sans fil (WPT) pour Kontaktlose Energieübertragungssysteme (WPT) für
véhicules électriques - Partie 3 : Exigences spécifiques Elektrofahrzeuge - Teil 3: Spezifische Anforderungen für die
relatives aux systèmes de transfert de puissance sans fil en kontaktlosen Energieübertragungssysteme mit Magnetfeld
présence de champs magnétiques (IEC/TS 61980-3:2019)
(IEC/TS 61980-3:2019)
This Technical Specification was approved by CENELEC on 2020-05-25.
CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. CLC IEC/TS 61980-3:2020 E
---------------------- Page: 3 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
CLC IEC /TS 61980-3:2020 (E)
European foreword
This document (CLC IEC/TS 61980-3:2020) consists of the text of IEC/TS 61980-3:2019
prepared by IEC/TC 69 "Electric road vehicles and electric industrial trucks".
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CENELEC shall not be held responsible for identifying any or all
such patent rights.
Endorsement notice
The text of the International Technical Specification IEC/TS 61980-3:2019 was approved by
CENELEC as a European Technical Specification without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60038 NOTE Harmonized as EN 60038
CISPR 11 NOTE Harmonized as EN 55011
2
---------------------- Page: 4 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
CLC IEC /TS 61980-3:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60529 - Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 60947-2 - Low-voltage switchgear and controlgear EN 60947-2 -
- Part 2: Circuit-breakers
IEC 61008-1 - Residual current operated circuit- EN 61008-1 -
breakers without integral overcurrent
protection for household and similar
uses (RCCBs) - Part 1: General rules
IEC 61009-1 - Residual current operated circuit- EN 61009-1 -
breakers with integral overcurrent
protection for household and similar
uses (RCBOs) - Part 1: General rules
IEC 62423 - Type F and type B residual current EN 62423 -
operated circuit-breakers with and
without integral overcurrent protection for
household and similar uses
IEC/TS 61980-2 2019 Electric vehicle wireless power transfer CLC IEC/TS 61980-2 2020
(WPT) systems - Part 2: Specific
requirements for communication
between electric road vehicle (EV) and
infrastructure
DIN 7405 1963 Wire staple 24/6 for office-staplers
- - Cold rolled low carbon steel flat products EN 10130 -
for cold forming – Technical delivery
conditions
3
---------------------- Page: 5 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
CLC IEC /TS 61980-3:2020 (E)
Publication Year Title EN/HD Year
ICNIRP Guidelines 1998 ICNIRP guidelines for limiting exposure
to time-varying electric, magnetic and
electromagnetic fields (up to 300 GHz),
International commission on nonionizing
radiation protection
ICNIRP Guidelines 2010 ICNIRP guidelines for limiting exposure
to time-varying electric and magnetic
fields (1 Hz – 100 kHz), International
commission on non-ionizing radiation
protection
UL 2251 - Standard for plugs, receptacles, and
couplers for electric vehicles
4
---------------------- Page: 6 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
IEC TS 61980-3
®
Edition 1.0 2019-06
TECHNICAL
SPECIFICATION
colour
inside
Electric vehicle wireless power transfer (WPT) systems –
Part 3: Specific requirements for the magnetic field wireless power transfer
systems
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 43.120 ISBN 978-2-8322-6675-5
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
– 2 – IEC TS 61980-3:2019 IEC 2019
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Abbreviations . 13
4 Symbols and abbreviated terms . 13
5 General . 13
6 Classification . 13
7 Interoperability . 15
7 System infrastructure requirements . 15
8 General systems requirements . 24
9 Communication . 24
10 Protection against electric shock . 24
11 Specific requirements for WPT systems . 25
12 Power cable assembly requirements . 26
13 Constructional requirements . 27
14 Strength of materials and parts . 27
15 Service and test conditions . 28
16 Electromagnetic compatibility (EMC) . 28
17 Marking and instructions . 28
101 Test procedure . 28
Annex AA (informative) DD reference EV power circuit (EVPC) for MF-WPT1, MF-
WPT2 and MF-WPT3 . 37
Annex BB (informative) Circular reference EV power circuit (EVPC) for MF-WPT1,
MF-WPT2 and MF-WPT3 . 54
Annex CC (informative) Heavy-duty magnetic field WPT . 73
Annex DD (informative) Coil position in parking spot . 79
Annex EE (informative) Description for system interoperability . 80
Bibliography . 107
Figure 101 – Flush mounted . 11
Figure 102 – Surface mounted . 12
Figure 103 – Components of an MF-WPT system . 16
Figure 104 – Control loop of WPT system . 21
Figure 105 – Illustration of test positions . 30
Figure AA.1 – Mechanical dimensions of the MF-WPT1/Z1 DD reference secondary
device . 38
Figure AA.2 – Schematic of the EV power electronics for the MF-WPT1/Z1 DD
reference EVPC . 39
Figure AA.3 – Mechanical dimensions of the MF-WPT1/Z2 DD reference secondary
device . 40
---------------------- Page: 8 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
IEC TS 61980-3:2019 IEC 2019 – 3 –
Figure AA.4 – Schematic of the EV power electronics for the MF-WPT1/Z2 DD
reference EVPC . 41
Figure AA.5 – Mechanical dimensions of the MF-WPT2/Z1 DD reference secondary
device . 42
Figure AA.6 – Schematic of the EV power electronics for the MF-WPT2/Z1 DD
reference EVPC . 43
Figure AA.7 – Mechanical dimensions of the MF-WPT2/Z2 DD reference secondary
device . 44
Figure AA.8 – Schematic of the EV power electronics for the MF-WPT2/Z2 DD
reference EVPC . 45
Figure AA.9 – Mechanical dimensions of the MF-WPT2/Z3 DD reference secondary
device . 46
Figure AA.10 – Schematic of the EV power electronics for the MF-WPT2/Z3 DD
reference EVPC . 47
Figure AA.11 – Mechanical dimensions of the MF-WPT3/Z1 DD reference secondary
device . 48
Figure AA.12 – Schematic of the EV power electronics for the MF-WPT3/Z1 DD
reference EVPC . 49
Figure AA.13 – Mechanical dimensions of the MF-WPT3/Z2 DD reference secondary
device . 50
Figure AA.14 – Schematic of the EV power electronics for the MF-WPT3/Z2 DD
reference EVPC . 51
Figure AA.15 – Mechanical dimensions of the MF-WPT3/Z3 DD reference secondary
device . 52
Figure AA.16 – Schematic of the EV power electronics for the MF-WPT3/Z3 DD
reference EVPC . 53
Figure BB.1 – Mechanical dimensions of the MF-WPT1/Z1 circular reference
secondary device . 55
Figure BB.2 – Schematic of the EV power electronics for the MF-WPT1/Z1 circular
reference EVPC . 56
Figure BB.3 – Mechanical dimensions of the MF-WPT1/Z2 circular reference
secondary device . 57
Figure BB.4– Schematic of the EV power electronics for the MF-WPT1/Z2 circular
reference EVPC . 58
Figure BB.5 – Mechanical dimensions of the MF-WPT1/Z3 circular reference
secondary device . 59
Figure BB.6 – Schematic of the EV power electronics for the MF-WPT1/Z3 circular
reference EVPC . 59
Figure BB.7 – Mechanical dimensions of the MF-WPT2/Z1 circular reference secondary
device . 61
Figure BB.8 – Schematic of the EV power electronics for the MF-WPT2/Z1 circular
reference EVPC . 62
Figure BB.9 – Mechanical dimensions of the MF-WPT2/Z2 circular reference secondary
device . 63
Figure BB.10 – Schematic of the EV power electronics for the MF-WPT2/Z2 circular
reference EVPC . 64
Figure BB.11– Mechanical dimensions of the MF-WPT2/Z3 circular reference
secondary device . 65
Figure BB.12 – Schematic of the EV power electronics for the MF-WPT2/Z3 circular
reference EVPC . 66
---------------------- Page: 9 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
– 4 – IEC TS 61980-3:2019 IEC 2019
Figure BB.13 – Mechanical dimensions of the MF-WPT3/Z1 circular reference
secondary device . 67
Figure BB.14 – Schematic of the EV power electronics for the MF-WPT3/Z1 circular
reference EVPC . 68
Figure BB.15 – Mechanical dimensions of the MF-WPT3/Z2 circular reference
secondary device . 69
Figure BB.16 – Schematic of the EV power electronics for the MF-WPT2/Z2 circular
reference EVPC . 70
Figure BB.17 – Mechanical dimensions of the MF-WPT3/Z3 circular reference
secondary device . 71
Figure BB.18– Schematic of the EV power electronics for the MF-WPT3/Z3 circular
reference EVPC . 72
Figure CC.1 – Mechanical dimensions of the MF-WPT5 heavy-duty WPT reference
primary device . 75
Figure CC.2 – Schematic of supply power electronics for the heavy-duty WPT
reference primary device . 76
Figure CC.3 – Mechanical dimensions of the MF-WPT5 heavy-duty WPT reference
secondary device . 77
Figure CC.4 – Schematic of the EV power electronics for the MF-WPT5 heavy-duty
WPT secondary reference device . 78
Figure DD.1 – Coil position in parking spot . 79
Figure EE.1 – General schematic of the concept showing the coil system and the ports
at which the parameters are defined . 81
Figure EE.2 – Example of GA impedance zone with stimulationi results for different
reference primary devices and secondary devices . 89
Figure EE.3 – Schematic to explain impedance . 91
Figure EE.4 – Behaviour of the reflected impedance . 92
Figure EE.5 – Position of measurement points . 95
Figure EE.6 – Coaxial gauge device . 97
Figure EE.7 – Transversal gauge device . 99
Figure EE.8 – Design of winding for the transversal gauge device . 100
Figure EE.9 – Exemplary test bench setup for secondary interoperability tests . 101
Figure EE.10 – Exemplary test bench setup for primary device interoperability tests . 103
Figure EE.11 – Test set-up for electric interoperability design testing . 105
Figure EE.12 –Test set-up for electric interoperability design testing . 105
---------------------- Page: 10 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
IEC TS 61980-3:2019 IEC 2019 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS –
Part 3: Specific requirements for the magnetic field wireless power
transfer systems
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a technical
specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 61980-3, which is a Technical Specification, has been prepared by IEC technical
committee 69: Electric road vehicles and electric industrial trucks.
---------------------- Page: 11 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
– 6 – IEC TS 61980-3:2019 IEC 2019
The text of this Technical Specification is based on the following documents:
Draft TS Report on voting
69/554A/DTS 69/616B/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61980 series, published under the general title Electric vehicle
wireless power transfer (WPT) systems, can be found on the IEC website.
This part is to be used in conjunction with IEC 61980-1:2015.
The clauses of the particular requirements in this document supplement or modify the
corresponding clauses in IEC 61980-1:2015. Where the text indicates an "addition" to or a
"replacement" of the relevant requirement, test specification or explanation of
IEC 61980-1:2015, these changes are made to the relevant text of IEC 61980-1:2015, which
then becomes part of the standard. Where no change is necessary, the words "Clause xx of
IEC 61980-1:2015 is applicable" are used. Additional items to those of IEC 61980-1:2015 are
numbered starting 101. Additional annexes are lettered from AA onwards.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
---------------------- Page: 12 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
IEC TS 61980-3:2019 IEC 2019 – 7 –
INTRODUCTION
The IEC 61980 series is published in separate parts according to the following structure:
– IEC 61980-1 covers general requirements for electric road vehicle (EV) wireless power
transfer (WPT) systems including general background and definitions. (e.g. efficiency,
electrical safety, EMC);
– IEC TS 61980-2 covers specific requirements for communication between electric road
vehicle (EV) and wireless power transfer (WPT) systems including general background
and definitions.
– IEC TS 61980-3 covers specific requirements for electric road vehicle (EV) magnetic field
wireless power transfer (MF-WPT) systems including general background and definitions
(e.g. efficiency, electrical safety, EMC).
The requirements described in IEC 61980-1 are general. The technical requirements for the
various wireless power transfer (WPT) technologies are very different; they are specified in
the technology specific parts of the IEC 61980 series. A list of possible WPT technologies is
listed in IEC 61980-1. The requirements for magnetic field wireless power transfer systems
(MF-WPT) are described in this document. Further parts of the IEC 61980 series will describe
other technologies such as power transfer via electric field (EF-WPT) or via electromagnetic
field wireless power transfer systems (EF-WPT) or electromagnetic field-WPT systems, also
named microwave-WPT systems (MW-WPT).
Reference to "technology specific parts" always refers to each parts of the IEC 61980 series.
The structure of the "technology specific parts" follows the structure of IEC 61980-1.
WPT systems are still under development. For this reason, there is the future but not
immedi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.