SIST ISO 81346-10:2023

Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 10: Power supply systems

This document provides rules for structuring of systems in the domain of power supply systems, being supplementary to the general principles for the structuring of systems including structuring of information about systems specified in IEC 81346-1.
Based on these principles, rules and guidance are given for the formulation of unambiguous reference designations for objects in any system.
The reference designation identifies objects for the purpose of creation and retrieval of information about an object and, where realized, about its corresponding component.
A reference designation labelled at a component is the key to finding information about that object among different kinds of documents.
The principles are general and are applicable to all technical areas (e.g. mechanical engineering, electrical engineering, construction engineering, process engineering). They can be used for systems based on different technologies or for systems combining several technologies.
This document also defines classes for systems and spaces in the field of power supply systems.

Systèmes industriels, installations et appareils, et produits industriels — Principes de structuration et désignations de référence — Partie 10: Centrales électriques

Industrijski sistemi, postroji in oprema ter industrijski proizvodi - Načela strukturiranja in referenčne oznake - 10. del: Napajalni sistemi

Ta dokument podaja pravila za strukturiranje sistemov na področju napajalnih sistemov in dopolnjuje splošna načela za strukturiranje sistemov, vključno s strukturiranjem informacij o sistemih, kot je določeno v standardu IEC 81346-1.
Na podlagi teh načel podaja pravila in navodila za oblikovanje nedvoumnih referenčnih oznak za predmete v katerem koli sistemu.
Referenčna oznaka opredeljuje predmete z namenom ustvarjanja in pridobivanja informacij o predmetu in njegovi ustrezni komponenti, če je ta izvedena.
Referenčna oznaka, s katero je opremljena komponenta, je ključna pri iskanju informacij o tem objektu med različnimi vrstami dokumentov.
Načela so splošna in veljajo za vsa tehnična področja (npr. strojništvo, elektrotehniko, gradbeništvo, procesno tehniko). Uporabljati jih je mogoče za sisteme, ki temeljijo na drugačnih tehnologijah, ali za sisteme, ki združujejo več tehnologij.
Ta dokument določa tudi razrede za sisteme in prostore na področju napajalnih sistemov.

General Information

• Status: Published
• Publication Date: 20-Aug-2023
• ICS: 01.110 - Technical product documentation
• Technical Committee: TRS - Technical drawings, quantities, units, symbols and graphical symbols
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Jul-2023
• Due Date: 09-Sep-2023
• Completion Date: 21-Aug-2023
• Ref Project: ISO 81346-10:2022 - Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 10: Power supply systems

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO 81346-10:2023
01-september-2023
Industrijski sistemi, postroji in oprema ter industrijski proizvodi - Načela
strukturiranja in referenčne oznake - 10. del: Napajalni sistemi
Industrial systems, installations and equipment and industrial products — Structuring
principles and reference designations — Part 10: Power supply systems
Systèmes industriels, installations et appareils, et produits industriels — Principes de
structuration et désignations de référence — Partie 10: Centrales électriques
Ta slovenski standard je istoveten z: ISO 81346-10:2022
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
SIST ISO 81346-10:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 81346-10:2023

---------------------- Page: 2 ----------------------
SIST ISO 81346-10:2023
INTERNATIONAL ISO
STANDARD 81346-10
First edition
2022-08
Industrial systems, installations and
equipment and industrial products —
Structuring principles and reference
designations —
Part 10:
Power supply systems
Systèmes industriels, installations et appareils, et produits
industriels — Principes de structuration et désignations de
référence —
Partie 10: Centrales électriques
Reference number
ISO 81346-10:2022(E)
© ISO 2022

---------------------- Page: 3 ----------------------
SIST ISO 81346-10:2023
ISO 81346-10:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 81346-10:2023
ISO 81346-10:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 Terms and definitions . 1
4 C onc ep t s . 3
4.1 General . 3
4 . 2 Obje c t . 3
4 . 3 A sp e c t . 3
4.4 Systems . 3
4.4.1 General . 3
4.4.2 P ower supply systems . 3
4.4.3 Technical systems .
...

INTERNATIONAL ISO
STANDARD 81346-10
First edition
2022-08
Industrial systems, installations and
equipment and industrial products —
Structuring principles and reference
designations —
Part 10:
Power supply systems
Systèmes industriels, installations et appareils, et produits
industriels — Principes de structuration et désignations de
référence —
Partie 10: Centrales électriques
Reference number
ISO 81346-10:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 81346-10:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 81346-10:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 Terms and definitions . 1
4 C onc ep t s . 3
4.1 General . 3
4 . 2 Obje c t . 3
4 . 3 A sp e c t . 3
4.4 Systems . 3
4.4.1 General . 3
4.4.2 P ower supply systems . 3
4.4.3 Technical systems . 4
4.4.4 C omponent systems . . 4
4 . 5 St r uc t u r i n g . 4
4 . 6 F u nc t ion . 4
4.7 Products and components . 4
4 . 8 L o c at ion .
...