Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05)

Standards 18541-1 to 4 are covering the field of light vehicles and 18541-5 will cover the field of heavy-duty motor vehicles.
The purpose is to treat specificities of mopeds and motorbikes, as well as all-terrain vehicles (quads) and other small vehicles with 3 or 4 wheels.

Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6: Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO 18541-6:2018, korrigierte Fassung 2018-05)

Dieses Dokument enthält alle Elemente (Definitionen, Anwendungsfälle, technische Anforderungen, Anforderungen an funktionale Nutzerschnittstellen und Konformitätsprüfungsfälle), die für den standardisierten Zugang zu Reparatur- und Wartungsinformationen für zwei- und dreirädrige Kraftfahrzeuge und leichte vierrädrige Kraftfahrzeuge (Kraftfahrzeuge der Fahrzeugklasse L) anwendbar sind.
Die Erarbeitung dieses Dokuments erfolgte auf der Grundlage von ISO 18541-1, ISO 18541-2, ISO 18541-3 und ISO 18541-4. Dieses Dokument stellt eine Anpassung der Festlegungen für den standardisierten Zugang zu RMI für Personenkraftwagen an Fahrzeuge der Fahrzeugklasse L dar, wobei die Ziele und Grundsätze des Normungsauftrages M/421 der Europäischen Kommission beibehalten wurden.
Dieses Dokument nimmt auf die Anwendung eines digitalen Anhangs genormter Suchbegriffe für RMI Bezug. Die Bereitstellung eines solchen digitalen Anhangs wird nach dem Verfahren erfolgen, das in ISO 18542 beschrieben wird.
CEN muss eine Registrierungsstelle zur Erstellung und Pflege eines geeigneten digitalen Anhangs nach ISO 18542 benennen.

Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de catégorie L (ISO 18541-6:2018, Version corrigée 2018-05)

ISO 18541-6.2018 contient tous les éléments (définitions, cas d'utilisation, exigences techniques, exigences fonctionnelles relatives aux interfaces utilisateur et cas de test de conformité) applicables à l'accès normalisé aux informations relatives à la réparation et à la maintenance des véhicules à deux ou trois roues et des quadricycles (véhicules de catégorie L).
ISO 18541-6.2018 a été developpé en se fondant sur l'ISO 18541‑1, ISO 18541‑2, ISO 18541‑3 et ISO 18541‑4. Le présent document constitue une adaptation des spécifications relatives à l'accès normalisé aux RMI des voitures particulières aux véhicules de catégorie L, dans le respect des objectifs et des principes du mandat M/421 de la Commission européenne.
ISO 18541-6.2018 a fait référence à l'utilisation d'une annexe numérique de termes de recherche normalisés relatifs aux RMI.
La fourniture d'une telle annexe numérique va respecter le processus décrit dans l'ISO 18542. Le CEN va désigner une Autorité d'enregistrement conformément à l'ISO 18542 pour la création et la maintenance d'une annexe numérique appropriée.

Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila kategorije L (ISO 18541-6:2018, popravljena različica 2018-05)

Standardni od 18541-1 do 4 zajemajo področje lahkih vozil, standard 18541-5 pa bo zajemal področje težkih motornih vozil. Namen je obravnavati posebnosti mopedov in motornih koles ter terenskih vozila (štirikolesnikov) in druga manjša vozila s 3 ali 4 kolesi.

General Information

Status
Published
Public Enquiry End Date
29-Oct-2015
Publication Date
07-Mar-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Mar-2018
Due Date
10-May-2018
Completion Date
08-Mar-2018

Buy Standard

Standard
SIST EN ISO 18541-6:2018 - BARVE na PDF-str 28,29,30
English language
167 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
SIST EN ISO 18541-6:2018 - BARVE na PDF-str 28,29,30
English language
167 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 18541-6:2018
01-maj-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO 18541-6:2018, popravljena različica 2018-05)

Road vehicles - Standardized access to automotive repair and maintenance information

(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-

6:2018, Corrected version 2018-05)

Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:

Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO
18541-6:2018, korrigierte Fassung 2018-05)

Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et

à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI

spécifiques aux véhicules de catégorie L (ISO 18541-6:2018, Version corrigée 2018-05)

Ta slovenski standard je istoveten z: EN ISO 18541-6:2018
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
43.180 Diagnostična, vdrževalna in Diagnostic, maintenance and
preskusna oprema test equipment
SIST EN ISO 18541-6:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18541-6:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 6: L-Category
vehicle specific RMI use cases and requirements (ISO
18541-6:2018, Corrected version 2018-05)

Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur

informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 6:

maintenance pour l'automobile (RMI) - Partie 6: Spezifische RMI Anwendungsfälle und Anforderungen

Exigences et cas d'usage RMI spécifiques aux véhicules für L-Kategorie Fahrzeuge (ISO 18541-6:2018)

de catégorie L (ISO 18541-6:2018)
This European Standard was approved by CEN on 14 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-6:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
European foreword

This document (EN ISO 18541-6:2018) has been prepared by Technical Committee ISO/TC 22 "Road

vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles”, the secretariat of

which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall

be withdrawn at the latest by August 2018.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 18541-6:2018, Corrected version 2018-05 has been approved by CEN as EN ISO 18541-

6:2018 without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 18541-6:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 18541-6:2018
INTERNATIONAL ISO
STANDARD 18541-6
First edition
2018-02
Corrected version
2018-05
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 6:
L-Category vehicle specific RMI use
cases and requirements
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de
catégorie L
Reference number
ISO 18541-6:2018(E)
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)
Contents Page

Foreword ...................................................................................................................................................................................................................................viii

Introduction ................................................................................................................................................................................................................................ix

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms, definitions and abbreviated terms ................................................................................................................................ 2

3.1 Terms and definitions ....................................................................................................................................................................... 2

3.2 Abbreviated terms ............................................................................................................................................................................... 8

4 Document overview and structure .................................................................................................................................................10

5 General information ......................................................................................................................................................................................11

5.1 Access to vehicle RMI .....................................................................................................................................................................11

5.2 Standardized access to RMI benefit examples ..........................................................................................................12

5.2.1 Independent operators ...........................................................................................................................................12

5.2.2 Vehicle manufacturers .............................................................................................................................................13

5.3 L-Category and subcategories ................................................................................................................................................13

5.4 Multi stage and RMI .........................................................................................................................................................................13

6 Basic principles, use case and requirement overview ...............................................................................................14

6.1 Basic principles....................................................................................................................................................................................14

6.1.1 Basic principles for use case definition .....................................................................................................14

6.1.2 Basic principles for requirements definition .......................................................................................15

6.1.3 Basic principles for functional user interface requirements definition ........................15

6.1.4 Basic principles for conformance test definition ..............................................................................15

6.2 Use case clusters .................................................................................................................................................................................16

6.3 Requirements clusters ...................................................................................................................................................................19

6.4 Functional user interface requirements clusters ...................................................................................................22

6.5 Conformance test clustering ....................................................................................................................................................24

6.5.1 General...................................................................................................................................................................................24

6.5.2 Main conformance test case clusters...........................................................................................................24

7 Use cases ....................................................................................................................................................................................................................30

7.1 UC 1 User authentication, authorization and administration .....................................................................30

7.1.1 UC 1.1 Register IO for use of the VM RMI system .............................................................................30

7.1.2 UC 1.2 Register IO employee for use of the VM RMI system ...................................................31

7.1.3 UC 1.3 Maintain IO status ......................................................................................................................................32

7.1.4 UC 1.4 Maintain user status .................................................................................................................................32

7.1.5 UC 1.5 Request to de-register IO employee ...........................................................................................32

7.1.6 UC 1.6 Login to VM RMI system .......................................................................................................................33

7.1.7 UC 1.7 Grant access to security-related RMI .........................................................................................33

7.2 UC 2 Payment for RMI ....................................................................................................................................................................34

7.3 UC 3 Vehicle identification .........................................................................................................................................................34

7.3.1 UC 3.1 Vehicle identification through product identifier ...........................................................34

7.3.2 UC 3.2 Vehicle type identification via product features ..............................................................35

7.4 UC 4 Provide selection methods for RMI .......................................................................................................................37

7.4.1 UC 4.1 Select information type .........................................................................................................................37

7.4.2 UC 4.2 Search by standardized terms .........................................................................................................38

7.4.3 UC 4.3 Navigate using product structure .................................................................................................38

7.4.4 UC 4.4 Select by document identifier ..........................................................................................................38

7.5 UC 5 Retrieve information packages .................................................................................................................................39

7.5.1 UC 5.1 Workshop procedures ............................................................................................................................39

7.5.2 UC 5.2 Wiring diagrams ..........................................................................................................................................40

7.5.3 UC 5.3 Technical service bulletin ....................................................................................................................40

7.5.4 UC 5.4 Recall information ......................................................................................................................................41

7.5.5 UC 5.5 Maintenance schedule ............................................................................................................................41

7.5.6 UC 5.6 Spare parts .......................................................................................................................................................42

© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

7.5.7 UC 5.7 Accessories .......................................................................................................................................................42

7.5.8 UC 5.8 Labour times ...................................................................................................................................................43

7.5.9 UC 5.9 Special tools .....................................................................................................................................................44

7.5.10 UC 5.10 Type-approval related information .........................................................................................44

7.6 UC 6 Vehicle diagnostics ..............................................................................................................................................................44

7.6.1 UC 6.1 DTC resolution ..............................................................................................................................................44

7.6.2 UC 6.2 VM symptom resolution .......................................................................................................................45

7.6.3 UC 6.3 Integrated diagnostics ............................................................................................................................45

7.7 UC 7 Updating and replacing modules (ECUs) .........................................................................................................46

7.8 UC 8 Electronic Maintenance history ...............................................................................................................................47

7.9 UC 9 Repair assistance technical support .....................................................................................................................47

7.10 UC 10 Request contact for specific RMI ..........................................................................................................................47

7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .....................47

7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers..................................................48

7.10.3 UC 10.3 Training material (delegate information) ..........................................................................48

7.10.4 UC 10.4 Redistributors ............................................................................................................................................49

7.10.5 UC 10.5 Republishers ................................................................................................................................................49

7.10.6 UC 10.6 Inspection and testing services ...................................................................................................50

7.10.7 UC 10.7 Alternative fuels retrofit systems ..............................................................................................50

7.10.8 UC 10.8 Engine and components remanufacturing ........................................................................50

7.10.9 UC 10.9 Component and parts manufacturers ....................................................................................51

7.10.10 UC 10.10 Validation of independently developed non-proprietary VCIs .....................51

7.11 UC 11 Courses and training information .......................................................................................................................52

8 Technical requirements .............................................................................................................................................................................53

8.1 Requirements cluster 1 — Access-related data administration ...............................................................53

8.1.1 [TREQ-1] General access-related data administration ................................................................53

8.1.2 Administration of IO and IO employee data by the VM ...............................................................53

8.1.3 [TREQ-4] Administration of payment data by the VM ................................................................54

8.1.4 [TREQ-5] Administration of access event data by the VM .......................................................55

8.1.5 [TREQ-6] Administration of access event data to security-related RMI by

the VM ....................................................................................................................................................................................55

8.2 Requirements cluster 2 – IT architecture .....................................................................................................................56

8.2.1 [TREQ-7] Conceptual architecture ................................................................................................................56

8.2.2 [TREQ-8] Implementation principles .........................................................................................................57

8.3 Requirements cluster 3 – External interfaces ...........................................................................................................60

8.3.1 [TREQ-9] Vehicle communication interface (VCI) ...........................................................................60

8.3.2 [TREQ-10] Trust centre (certificate management).........................................................................63

8.3.3 [TREQ-11] Parts ordering for security-related features ............................................................64

8.3.4 [TREQ-12] Partnered accessory provider systems........................................................................64

8.4 Requirements cluster 4 — Technical infrastructure ...........................................................................................64

8.4.1 [TREQ-13] Type of device .....................................................................................................................................64

8.4.2 [TREQ-14] Hardware features .........................................................................................................................65

8.4.3 [TREQ-15] Operating systems .........................................................................................................................65

8.4.4 [TREQ-16] Web browsers ....................................................................................................................................65

8.4.5 [TREQ-17] Presentation formats for information packages ...................................................66

8.4.6 [TREQ-18] Internet connection ......................................................................................................................66

8.4.7 [TREQ-19] Performance of the VM RMI system ...............................................................................66

8.5 Requirements cluster 5 – Co-existence of VM software on IO client .....................................................67

8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client ......67

8.5.2 [TREQ-21] Requirements for updating of installed VM data and

applications on the IO client ...............................................................................................................................68

8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on

the IO client .......................................................................................................................................................................68

8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on

the IO client .......................................................................................................................................................................69

8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal

termination of the VM-specific software on the IO client ..........................................................69

8.6 Requirements cluster 6 – Operations ...............................................................................................................................70

iv © ISO 2018 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

8.6.1 [TREQ-25] VM RMI system availability time ........................................................................................70

8.6.2 [TREQ-26] Support for the usage of the VM RMI system .........................................................70

8.6.3 [TREQ-27] Operation of the IO PC .................................................................................................................71

8.7 [TREQ-28] Requirements cluster 7 – Functional user interface ..............................................................71

9 Functional user interface requirements ...................................................................................................................................72

9.1 General description ..........................................................................................................................................................................72

9.1.1 Navigational pathway from standardized use cases to VM-specific

navigation position .....................................................................................................................................................72

9.1.2 VM RMI system standardised navigation ................................................................................................73

9.2 Requirements cluster 8 — Standardized access mode .....................................................................................75

9.2.1 [FREQ-1] RMI access mode .................. ................................................................................................................75

9.2.2 [FREQ-2] Registration and login support ..............................................................................................76

9.3 Requirements cluster 9 — Use cases map ...................................................................................................................76

9.3.1 [FREQ-3] VM RMI system implemented use cases map .............................................................76

9.3.2 [FREQ-4] Download area .....................................................................................................................................78

9.4 Requirements cluster 10 – Navigational pathway .................................................................................................78

9.4.1 [FREQ-5] Navigational pathway ......................................................................................................................78

10 Conformance test cases ..............................................................................................................................................................................79

10.1 Conformance test case — General structure ......... .....................................................................................................79

10.1.1 Overview ..............................................................................................................................................................................79

10.1.2 Test case reference number and title [RMI-CT_...] [title] ............................................................79

10.1.3 Test purpose .....................................................................................................................................................................79

10.1.4 Configuration ...................................................................................................................................................................79

10.1.5 Preamble (setup state) ............................................................................................................................................79

10.1.6 Test execution ..................................................................................................................................................................79

10.1.7 Postamble............................................................................................................................................................................80

10.1.8 Result criteria ..................................................................................................................................................................80

10.2 CT cluster 1 – Access-related data administration ...............................................................................................80

10.2.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex B] Test client configuration ..........................80

10.2.2 [RMI-CT_TREQ-17] Test presentation formats for information packages ..................81

10.3 CT cluster 2 — Test client’s external interfaces ......................................................................................................82

10.3.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) ..........................................82

10.3.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features ...........................83

10.3.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .......................................83

10.4 CT cluster 3 — Test user authentication, aut
...

SLOVENSKI STANDARD
SIST EN ISO 18541-6:2018
01-maj-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO 18541-6:2018)

Road vehicles - Standardized access to automotive repair and maintenance information

(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-

6:2018)

Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:

Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO
18541-6:2018)

Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et

à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI

spécifiques aux véhicules de catégorie L (ISO 18541-6:2018)
Ta slovenski standard je istoveten z: EN ISO 18541-6:2018
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
SIST EN ISO 18541-6:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18541-6:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version
Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 6: L-Category
vehicle specific RMI use cases and requirements (ISO
18541-6:2018)

Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur

informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 6:

maintenance pour l'automobile (RMI) - Partie 6: Spezifische RMI Anwendungsfälle und Anforderungen

Exigences et cas d'usage RMI spécifiques aux véhicules für L-Kategorie Fahrzeuge (ISO 18541-6:2018)

de catégorie L (ISO 18541-6:2018)
This European Standard was approved by CEN on 14 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-6:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
European foreword

This document (EN ISO 18541-6:2018) has been prepared by Technical Committee ISO/TC 22 "Road

vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles”, the secretariat of

which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall

be withdrawn at the latest by August 2018.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 18541-6:2018 has been approved by CEN as EN ISO 18541-6:2018 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 18541-6:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 18541-6:2018
INTERNATIONAL ISO
STANDARD 18541-6
First edition
2018-02
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 6:
L-Category vehicle specific RMI use
cases and requirements
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de
catégorie L
Reference number
ISO 18541-6:2018(E)
ISO 2018
---------------------- Page: 7 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)
Contents Page

Foreword ...................................................................................................................................................................................................................................viii

Introduction ................................................................................................................................................................................................................................ix

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms, definitions and abbreviated terms ................................................................................................................................ 2

3.1 Terms and definitions ....................................................................................................................................................................... 2

3.2 Abbreviated terms ............................................................................................................................................................................... 8

4 Document overview and structure .................................................................................................................................................10

5 General information ......................................................................................................................................................................................11

5.1 Access to vehicle RMI .....................................................................................................................................................................11

5.2 Standardized access to RMI benefit examples ..........................................................................................................12

5.2.1 Independent operators ...........................................................................................................................................12

5.2.2 Vehicle manufacturers .............................................................................................................................................13

5.3 L-Category and subcategories ................................................................................................................................................13

5.4 Multi stage and RMI .........................................................................................................................................................................13

6 Basic principles, use case and requirement overview ...............................................................................................14

6.1 Basic principles....................................................................................................................................................................................14

6.1.1 Basic principles for use case definition .....................................................................................................14

6.1.2 Basic principles for requirements definition .......................................................................................15

6.1.3 Basic principles for functional user interface requirements definition ........................15

6.1.4 Basic principles for conformance test definition ..............................................................................15

6.2 Use case clusters .................................................................................................................................................................................16

6.3 Requirements clusters ...................................................................................................................................................................19

6.4 Functional user interface requirements clusters ...................................................................................................22

6.5 Conformance test clustering ....................................................................................................................................................24

6.5.1 General...................................................................................................................................................................................24

6.5.2 Main conformance test case clusters...........................................................................................................24

7 Use cases ....................................................................................................................................................................................................................30

7.1 UC 1 User authentication, authorization and administration .....................................................................30

7.1.1 UC 1.1 Register IO for use of the VM RMI system .............................................................................30

7.1.2 UC 1.2 Register IO employee for use of the VM RMI system ...................................................31

7.1.3 UC 1.3 Maintain IO status ......................................................................................................................................32

7.1.4 UC 1.4 Maintain user status .................................................................................................................................32

7.1.5 UC 1.5 Request to de-register IO employee ...........................................................................................32

7.1.6 UC 1.6 Login to VM RMI system .......................................................................................................................33

7.1.7 UC 1.7 Grant access to security-related RMI .........................................................................................33

7.2 UC 2 Payment for RMI ....................................................................................................................................................................34

7.3 UC 3 Vehicle identification .........................................................................................................................................................34

7.3.1 UC 3.1 Vehicle identification through product identifier ...........................................................34

7.3.2 UC 3.2 Vehicle type identification via product features ..............................................................35

7.4 UC 4 Provide selection methods for RMI .......................................................................................................................37

7.4.1 UC 4.1 Select information type .........................................................................................................................37

7.4.2 UC 4.2 Search by standardized terms .........................................................................................................38

7.4.3 UC 4.3 Navigate using product structure .................................................................................................38

7.4.4 UC 4.4 Select by document identifier ..........................................................................................................38

7.5 UC 5 Retrieve information packages .................................................................................................................................39

7.5.1 UC 5.1 Workshop procedures ............................................................................................................................39

7.5.2 UC 5.2 Wiring diagrams ..........................................................................................................................................40

7.5.3 UC 5.3 Technical service bulletin ....................................................................................................................40

7.5.4 UC 5.4 Recall information ......................................................................................................................................41

7.5.5 UC 5.5 Maintenance schedule ............................................................................................................................41

7.5.6 UC 5.6 Spare parts .......................................................................................................................................................42

© ISO 2018 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

7.5.7 UC 5.7 Accessories .......................................................................................................................................................42

7.5.8 UC 5.8 Labour times ...................................................................................................................................................43

7.5.9 UC 5.9 Special tools .....................................................................................................................................................44

7.5.10 UC 5.10 Type-approval related information .........................................................................................44

7.6 UC 6 Vehicle diagnostics ..............................................................................................................................................................44

7.6.1 UC 6.1 DTC resolution ..............................................................................................................................................44

7.6.2 UC 6.2 VM symptom resolution .......................................................................................................................45

7.6.3 UC 6.3 Integrated diagnostics ............................................................................................................................45

7.7 UC 7 Updating and replacing modules (ECUs) .........................................................................................................46

7.8 UC 8 Electronic Maintenance history ...............................................................................................................................47

7.9 UC 9 Repair assistance technical support .....................................................................................................................47

7.10 UC 10 Request contact for specific RMI ..........................................................................................................................47

7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .....................47

7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers..................................................48

7.10.3 UC 10.3 Training material (delegate information) ..........................................................................48

7.10.4 UC 10.4 Redistributors ............................................................................................................................................49

7.10.5 UC 10.5 Republishers ................................................................................................................................................49

7.10.6 UC 10.6 Inspection and testing services ...................................................................................................50

7.10.7 UC 10.7 Alternative fuels retrofit systems ..............................................................................................50

7.10.8 UC 10.8 Engine and components remanufacturing ........................................................................50

7.10.9 UC 10.9 Component and parts manufacturers ....................................................................................51

7.10.10 UC 10.10 Validation of independently developed non-proprietary VCIs .....................51

7.11 UC 11 Courses and training information .......................................................................................................................52

8 Technical requirements .............................................................................................................................................................................53

8.1 Requirements cluster 1 — Access-related data administration ...............................................................53

8.1.1 [TREQ-1] General access-related data administration ................................................................53

8.1.2 Administration of IO and IO employee data by the VM ...............................................................53

8.1.3 [TREQ-4] Administration of payment data by the VM ................................................................54

8.1.4 [TREQ-5] Administration of access event data by the VM .......................................................55

8.1.5 [TREQ-6] Administration of access event data to security-related RMI by

the VM ....................................................................................................................................................................................55

8.2 Requirements cluster 2 – IT architecture .....................................................................................................................56

8.2.1 [TREQ-7] Conceptual architecture ................................................................................................................56

8.2.2 [TREQ-8] Implementation principles .........................................................................................................57

8.3 Requirements cluster 3 – External interfaces ...........................................................................................................60

8.3.1 [TREQ-9] Vehicle communication interface (VCI) ...........................................................................60

8.3.2 [TREQ-10] Trust centre (certificate management).........................................................................63

8.3.3 [TREQ-11] Parts ordering for security-related features ............................................................64

8.3.4 [TREQ-12] Partnered accessory provider systems........................................................................64

8.4 Requirements cluster 4 — Technical infrastructure ...........................................................................................64

8.4.1 [TREQ-13] Type of device .....................................................................................................................................64

8.4.2 [TREQ-14] Hardware features .........................................................................................................................65

8.4.3 [TREQ-15] Operating systems .........................................................................................................................65

8.4.4 [TREQ-16] Web browsers ....................................................................................................................................65

8.4.5 [TREQ-17] Presentation formats for information packages ...................................................66

8.4.6 [TREQ-18] Internet connection ......................................................................................................................66

8.4.7 [TREQ-19] Performance of the VM RMI system ...............................................................................66

8.5 Requirements cluster 5 – Co-existence of VM software on IO client .....................................................67

8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client ......67

8.5.2 [TREQ-21] Requirements for updating of installed VM data and

applications on the IO client ...............................................................................................................................68

8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on

the IO client .......................................................................................................................................................................68

8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on

the IO client .......................................................................................................................................................................69

8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal

termination of the VM-specific software on the IO client ..........................................................69

8.6 Requirements cluster 6 – Operations ...............................................................................................................................70

iv © ISO 2018 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

8.6.1 [TREQ-25] VM RMI system availability time ........................................................................................70

8.6.2 [TREQ-26] Support for the usage of the VM RMI system .........................................................70

8.6.3 [TREQ-27] Operation of the IO PC .................................................................................................................71

8.7 [TREQ-28] Requirements cluster 7 – Functional user interface ..............................................................71

9 Functional user interface requirements ...................................................................................................................................72

9.1 General description ..........................................................................................................................................................................72

9.1.1 Navigational pathway from standardized use cases to VM-specific

navigation position .....................................................................................................................................................72

9.1.2 VM RMI system standardised navigation ................................................................................................73

9.2 Requirements cluster 8 — Standardized access mode .....................................................................................75

9.2.1 [FREQ-1] RMI access mode .................. ................................................................................................................75

9.2.2 [FREQ-2] Registration and login support ..............................................................................................76

9.3 Requirements cluster 9 — Use cases map ...................................................................................................................76

9.3.1 [FREQ-3] VM RMI system implemented use cases map .............................................................76

9.3.2 [FREQ-4] Download area .....................................................................................................................................78

9.4 Requirements cluster 10 – Navigational pathway .................................................................................................78

9.4.1 [FREQ-5] Navigational pathway ......................................................................................................................78

10 Conformance test cases ..............................................................................................................................................................................79

10.1 Conformance test case — General structure ......... .....................................................................................................79

10.1.1 Overview ..............................................................................................................................................................................79

10.1.2 Test case reference number and title [RMI-CT_...] [title] ............................................................79

10.1.3 Test purpose .....................................................................................................................................................................79

10.1.4 Configuration ...................................................................................................................................................................79

10.1.5 Preamble (setup state) ............................................................................................................................................79

10.1.6 Test execution ..................................................................................................................................................................79

10.1.7 Postamble............................................................................................................................................................................80

10.1.8 Result criteria ..................................................................................................................................................................80

10.2 CT cluster 1 – Access-related data administration ...............................................................................................80

10.2.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex B] Test client configuration ..........................80

10.2.2 [RMI-CT_TREQ-17] Test presentation formats for information packages ..................81

10.3 CT cluster 2 — Test client’s external interfaces ......................................................................................................82

10.3.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) ..........................................82

10.3.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features ...........................83

10.3.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .......................................83

10.4 CT cluster 3 — Test user authentication, authorization and administration ................................84

10.4.1 [RMI-CT_UC1.1] Test to register IO for use of the VM RMI system ....................................84

10.4.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.