oSIST prEN 50436-4:2007

Alcohol interlocks -Test methods and performance requirements -- Part 4: Connectors for the electrical connection between the alcohol interlock and the vehicle

CLC/BTTF 116-2 decision after UNECE WP 29 meeting: to stop the project ( (see details in BT135/DG7730/DV) * D135/073 (Benchmark 3) confirmed by D136/C042: BT noted the CLC/BTTF 116-2 decision to stop the project

Alkohol-Interlocks - Prüfverfahren und Anforderungen an das Betriebsverhalten -- Teil 4: Stecker für die elektrische Verbindung zwischen dem Alkohol-Interlock und dem Fahrzeug

Alcootests électroniques anti-démarrage - Méthodes d'essai et exigences de performance -- Partie 4: Connecteurs pour connexion électrique entre l'alcootest électronique et le véhicule

Alkoholne zapore - Preskusne metode in zahtevane lastnosti - 4. del: Konektorji za električno povezavo med alkoholno zaporo in vozilom

General Information

• Status: Not Published
• Public Enquiry End Date: 16-Aug-2007
• ICS: 13.200 - Accident and disaster control
• ICS: 43.040.80 - Crash protection and restraint systems
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 20-Aug-2010
• Due Date: 25-Aug-2010
• Completion Date: 20-Aug-2010
• Ref Project: prEN 50436-4 - Alcohol interlocks -Test methods and performance requirements - Part 4: Connectors for the electrical connection between the alcohol interlock and the vehicle

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50436-4:2007
01-julij-2007
$ONRKROQH]DSRUH3UHVNXVQHPHWRGHLQ]DKWHYDQHODVWQRVWLGHO.RQHNWRUML]D
HOHNWULþQRSRYH]DYRPHGDONRKROQR]DSRURLQYR]LORP
Alcohol interlocks -Test methods and performance requirements -- Part 4: Connectors for
the electrical connection between the alcohol interlock and the vehicle
Alkohol-Interlocks - Prüfverfahren und Anforderungen an das Betriebsverhalten -- Teil 4:
Stecker für die elektrische Verbindung zwischen dem Alkohol-Interlock und dem
Fahrzeug
Alcootests électroniques anti-démarrage - Méthodes d'essai et exigences de
performance -- Partie 4: Connecteurs pour connexion électrique entre l'alcootest
électronique et le véhicule
Ta slovenski standard je istoveten z: prEN 50436-4
ICS:
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
43.040.80 Varnostne naprave in sistemi Safety installations and
za zadrževanje restraint systems
oSIST prEN 50436-4:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50436-4:2007

---------------------- Page: 2 ----------------------
oSIST prEN 50436-4:2007

DRAFT
EUROPEAN STANDARD
prEN 50436-4

NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM

ICS


English version


Alcohol interlocks -Test methods and performance requirements -
Part 4: Connectors for the electrical connection between the alcohol
interlock and the vehicle



Alcootests électroniques anti-démarrage - Alkohol-Interlocks -
Méthodes d'essai et exigences de Prüfverfahren und Anforderungen an das
performance - Betriebsverhalten -
Partie 4: Connecteurs pour connexion Teil 4: Stecker für die elektrische
électrique entre l'alcootest électronique et Verbindung zwischen dem
le véhicule Alkohol-Interlock und dem Fahrzeug



This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2007-09-07.

It has been drawn up by CLC/BTTF 116-2.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 21081 Ref. No. prEN 50436-4:2007 E

Draft for Enquiry

---------------------- Page: 3 ----------------------
oSIST prEN 50436-4:2007
prEN 50436-4:2007 – 2 –
Foreword
This draft European Standard was prepared by the CENELEC BTTF 116-2, Alcohol interlocks.
It is submitted to the CENELEC enquiry.
___________________
Draft for Enquiry

---------------------- Page: 4 ----------------------
oSIST prEN 50436-4:2007
– 3 – prEN 50436-4:2007
Contents
Page
Introduction.4
1 Scope .5
2 Normative references.5
3 Definitions.5
4 Connectors .6
5 Pin assignment.7
5.1 Explanation .7
5.2 Connector pin lists.8

Table 1 – Properties of the connectors.6
Table 2 – Purposes of the pin assignments .7
Table 3 – Pin assignment of the connector 1 .8
Table 4 – Pin assignment of the connector 2 .9
Table 5 – Pin assignment of the connector 3 .10

Draft for Enquiry

---------------------- Page: 5 ----------------------
oSIST prEN 50436-4:2007
prEN 50436-4:2007 – 4 –
Introduction
Alcohol interlocks are often intended for after-market installation. For this purpose they have to be
connected to the electric circuits of the vehicle.
This installation of an alcohol interlock should not interfere with the proper performance of the vehicle
and should be as easy and as fast as possible. Additionally, the installation costs should be low in
relation to the total cost of the alcohol interlock.
Therefore, it is desirable to have a standardized interface between alcohol interlocks and vehicles.
Draft for Enquiry

---------------------- Page: 6 ----------------------
oSIST prEN 50436-4:2007
– 5 – prEN 50436-4:2007
1 Scope
This European Standard is part of a series of European Standards for alcohol interlocks:
– EN 50436-1 Alcohol interlocks - Test methods and performance requirements -
Part 1: Instruments for drink-driving-offender programs
1)
– EN 50436-2 Alcohol interlocks - Test methods and performance requirements -
Part 2: Instruments having a mouthpiece and measuring breath alcohol for
general preventive use
2)
– EN 50436-3 Alcohol interlocks - Test methods and performance requirements -
Part 3: Guidance for selection, installation, use and maintenance
This European Standard specifies the interface between an alcohol interlock for aftermarket installation
and the vehicle. It details the types of the connectors as well as the assignment of the connector pins.
This European Standard is applicable to alcohol interlocks for drink-driving-offender programs as well
as to alcohol
...