SIST EN 3102:2013
(Main)Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
This European Standard defines the test method for the determination of the operability of a cured sealant during and after submission to a bending load at low temperatures (low-temperature flexibility).
Luft- und Raumfahrt - Dichtmassen - Prüfverfahren - Bestimmung der Kälteflexibilität
Diese Norm legt das Prüfverfahren für die Bestimmung der Funktionsfähigkeit einer ausgehärteten Dichtmasse fest, nachdem sie einer Biegelast bei niedrigen Temperaturen (Kälteflexibilität) unterzogen wurde.
Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
Aeronavtika - Tesnilna sredstva - Preskusne metode - Ugotavljanje nizkotemperaturne fleksibilnosti
Ta evropski standard določa preskusno metodo za ugotavljanje delovanja vulkaniziranega tesnilnega sredstva med in po upogibanju pod obremenitvijo pri nizkih temperaturah (nizkotemperaturna fleksibilnost).
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Tesnilna sredstva - Preskusne metode - Ugotavljanje nizkotemperaturne fleksibilnostiLuft- und Raumfahrt - Dichtmassen - Prüfverfahren - Bestimmung der KälteflexibilitätSérie aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse températureAerospace series - Sealants - Test methods - Determination of low-temperature flexibility49.025.99Drugi materialiOther materialsICS:Ta slovenski standard je istoveten z:EN 3102:2013SIST EN 3102:2013en,de01-maj-2013SIST EN 3102:2013SLOVENSKI
STANDARD
SIST EN 3102:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3102
February 2013 ICS 49.025.99 English Version
Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température Luft- und Raumfahrt - Dichtmassen - Prüfverfahren - Bestimmung der Kälteflexibilität This European Standard was approved by CEN on 24 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3102:2013: ESIST EN 3102:2013
EN 3102:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle of the method .4 5 Apparatus and accessories .4 5.1 Apparatus .4 5.2 Accessories .5 6 Test pieces .5 6.1 Dimensions of material strips (substrates) .5 6.2 Shape and manufacture .5 6.3 Curing and exposure methods .5 6.4 Number .6 7 Procedure .6 8 Designation .6 9 Evaluation .7 10 Test report .7
SIST EN 3102:2013
EN 3102:2013 (E) 3 Foreword This document (EN 3102:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.