SIST EN 50643:2019/A1:2021

Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment

Elektrische und elektronische Haushalts- und Bürogeräte - Messung der Leistungsaufnahme im vernetzten Bereitschaftsbetrieb von Geräten am Netzwerkrand

Appareils électriques et électroniques pour application domestique et équipement de bureau - Mesure de la consommation d'énergie en veille avec maintien de la connexion au réseau des équipements de périphérie

Električna in elektronska gospodinjska in pisarniška oprema - Merjenje porabe električne energije v stanju omrežne pripravljenosti na robu omrežja

General Information

• Status: Published
• Publication Date: 03-Jan-2021
• ICS: 35.260 - Office machines
• ICS: 97.030 - Domestic electrical appliances in general
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Apr-2020
• Due Date: 26-Jun-2020
• Completion Date: 04-Jan-2021
• Directive: 2019/2017 - COMMISSION DELEGATED REGULATION (EU) 2019/2017 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU) No 1059/2010
• Directive: 2019/2022 - COMMISSION REGULATION (EU) 2019/2022 of 1 October 2019 laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1016/2010
• Mandate: M/544 - [C(2015)9468] Standardisation request to the European standardisation organisations as regards Ecodesign requirements for network standby in support of Regulation (EC) no 1275/2008 and Regulation (EC) 642/2009
• Ref Project: EN 50643:2018/A1:2020 - Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment

Relations

• Amends: SIST EN 50643:2019 - Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
• Effective Date: 03-Mar-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50643:2019/A1:2021
01-februar-2021
Električna in elektronska gospodinjska in pisarniška oprema - Merjenje porabe
električne energije v stanju omrežne pripravljenosti na robu omrežja
Electrical and electronic household and office equipment - Measurement of networked
standby power consumption of edge equipment
Elektrische und elektronische Haushalts- und Bürogeräte - Messung der
Leistungsaufnahme im vernetzten Bereitschaftsbetrieb von Geräten am Netzwerkrand
Appareils électriques et électroniques pour application domestique et équipement de
bureau - Mesure de la consommation d'énergie en veille avec maintien de la connexion
au réseau des équipements de périphérie
Ta slovenski standard je istoveten z: EN 50643:2018/A1:2020
ICS:
35.260 Pisarniški stroji Office machines
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
SIST EN 50643:2019/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50643:2019/A1:2021

---------------------- Page: 2 ----------------------
SIST EN 50643:2019/A1:2021


EUROPEAN STANDARD EN 50643:2018/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2020
ICS 35.260; 97.030

English Version
Electrical and electronic household and office equipment -
Measurement of networked standby power consumption of edge
equipment
Appareils électriques et électroniques pour application Elektrische und elektronische Haushalts- und Bürogeräte -
domestique et équipement de bureau - Mesure de la Messung der Leistungsaufnahme im vernetzten
consommation d'énergie en veille avec maintien de la Bereitschaftsbetrieb von Geräten am Netzwerkrand
connexion au réseau des équipements de périphérie
This amendment A1 modifies the European Standard EN 50643:2018; it was approved by CENELEC on 2020-02-19. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50643:2018/A1:2020 E

---------------------- Page: 3 ----------------------
SIST EN 50643:2019/A1:2021
European foreword
This document (EN 50643:2018/A1:2020) has been prepared by CLC/TC 100X "Audio, video and
multimedia systems and equipment and related sub-systems".
The following dates are fixed:
• latest date by which this document has (dop) 2021-02-19
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-02-19
standards conflicting with this document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.

---------------------- Page: 4 ----------------------
SIST EN 50643:2019/A1:2021
1 Modifications to Annex ZA "Relationship between this European Standard
and the eco-design requirements of Commission Regulation (EU) No
801/2013 aimed to be covered"
Replace Annex ZA with the following Annex ZZ:
"
Annex ZZ
(informative)

Relationship between this European Standard and the ecodesign
requirements of both Commission Regulation (EC) No 1275/2008 and
Commission Regulation (EC) No 642/2009, as jointly amended by
Commission Regulation (EU) No 801/2013
This European standard has been prepared under a Commission’s standardisation request to the
European standardisation organisations as regards ecodesign requirements for networked standby in
support of Regulation (EC) No 1275/2008 and Regulation (EC) No 642/2009, M/544 / C(2015) 9468
final of 5 January 2016, to provide one voluntary means of conforming to the ecodesign requirements
on networked standby of the following:
— Commission Regula
...