SIST EN ISO 12670:2016
(Main)Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
This International Standard specifies technical supply conditions for parts with thermally sprayed coatings for
the manufacturing or repair of components.
This International Standard applies to applications where quality requirements according to ISO 14922‑2
(comprehensive requirements) or ISO 14922‑3 (standard requirements) are required.
Thermisches Spritzen - Bauteile mit thermisch gespritzten Schichten - Technische Lieferbedingungen (ISO 12670:2011)
Projection thermique - Éléments traités par projection thermique - Conditions techniques de livraison (ISO 12670:2011)
L'ISO 12670:2011 spécifie les conditions techniques de livraison des revêtements obtenus par projection thermique, pour la fabrication ou la réparation des éléments.
L'ISO 12670:2011 concerne les applications dans lesquelles des exigences qualité conformément à l'ISO 14922‑2 (exigences complètes) ou à l'ISO 14922‑3 (exigences standard) sont requises.
Vroče brizganje - Sestavni deli s premazi, nanesenimi z vročim brizganjem - Tehnični dobavni pogoji (ISO 12670:2011)
Ta mednarodni standard določa tehnične dobavne pogoje za dele s premazi, nanesenimi z vročim brizganjem, za proizvodnjo in popravilo sestavnih delov.
Ta mednarodni standard se uporablja za nanose, kjer so obvezne zahteve glede kakovosti v skladu s standardom ISO 14922‑2 (celovite zahteve) ali ISO 14922‑3 (standardne zahteve).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12670:2016
01-januar-2016
1DGRPHãþD
SIST EN 15311:2007
9URþHEUL]JDQMH6HVWDYQLGHOLVSUHPD]LQDQHVHQLPL]YURþLPEUL]JDQMHP
7HKQLþQLGREDYQLSRJRML ,62
Thermal spraying - Components with thermally sprayed coatings - Technical supply
conditions (ISO 12670:2011)
Thermisches Spritzen - Bauteile mit thermisch gespritzten Schichten - Technische
Lieferbedingungen (ISO 12670:2011)
Projection thermique - Éléments traités par projection thermique - Conditions techniques
de livraison (ISO 12670:2011)
Ta slovenski standard je istoveten z: EN ISO 12670:2015
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 12670:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12670:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 12670:2016
EN ISO 12670
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2015
EUROPÄISCHE NORM
ICS 25.220.20 Supersedes EN 15311:2007
English Version
Thermal spraying - Components with thermally sprayed
coatings - Technical supply conditions (ISO 12670:2011)
Projection thermique - Éléments traités par projection Thermisches Spritzen - Bauteile mit thermisch
thermique - Conditions techniques de livraison (ISO gespritzten Schichten - Technische Lieferbedingungen
12670:2011) (ISO 12670:2011)
This European Standard was approved by CEN on 27 September 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12670:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12670:2016
EN ISO 12670:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12670:2016
EN ISO 12670:2015 (E)
European foreword
The text of ISO 12670:2011 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 12670:2015 by Technical Committee CEN/TC 240 “Thermal spraying and thermally sprayed
coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be
withdrawn at the latest by April 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 15311:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12670:2011 has been approved by CEN as EN ISO 12670:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 12670:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 12670:2016
INTERNATIONAL ISO
STANDARD 12670
First edition
2011-12-01
Thermal spraying — Components with
thermally sprayed coatings — Technical
supply conditions
Projection thermique — Éléments traités par projection thermique —
Conditions techniques de livraison
Reference number
ISO 12670:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 12670:2016
ISO 12670:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12670:2016
ISO 12670:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12670 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 12670:2016
---------------------- Page: 10 ----------------------
SIST EN ISO 12670:2016
INTERNATIONAL STANDARD ISO 12670:2011(E)
Thermal spraying — Components with thermally sprayed
coatings — Technical supply conditions
1 Scope
This International Standard specifies technical supply conditions for parts with thermally sprayed coatings for
the manufacturing or repair of components.
This International Standard applies to applications where quality requirements according to ISO 14922-2
(comprehensive requirements) or ISO 14922-3 (standard requirements) are required.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 2063, Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
ISO 4288, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and
procedures for the assessment of surface texture
ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method
ISO 12690, Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
ISO 14232, Thermal spraying — Powders — Composition and technical supply conditions
ISO 14916, Thermal spraying — Determination of tensile adhesive strength
ISO 14918, Thermal spraying — Approval testing of thermal sprayers
ISO 14919, Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical
supply conditions
ISO 14923, Thermal spraying — Characterization and testing of thermally sprayed coatings
EN 473, Non destructive testing — Qualification and certification of NDT personnel — General principles
EN 657, Thermal spraying — Terminology, classification
EN 1395-1, Thermal spraying — Acceptance inspection of thermal spraying equipment — Part 1: General
requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 657 apply.
© ISO 2011 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 12670:2016
ISO 12670:2011(E)
4 Requirements
4.1 General requirements
4.1.1 Specifying the general requirements
This International Standard, which specifies the general requirements for supply, shall be indicated in the list of
parts or in other manufacturing or delivery instructions.
4.1.2 Qualification of the manufacturer
The manufacturer of the thermally sprayed coating shall possess a quality management system, shall fulfil
all requirements stipulated in the coating specification for the part, shall employ qualified personnel and is
responsible for keeping the spraying equipment in a functional and safe condition.
Considering the following standards can help to fulfil the quality requirements for the coating:
a) spraying coordinator (supervisor): qualified according to ISO 12690;
b) thermal sprayer: qualified according to ISO 14918 or qualified by appropriate skill and knowledge;
c) non-destructive testing personnel: qualification according to EN 473;
d) spraying equipment: checked according to the relevant part of EN 1395 or qualified by the unobjectionable
and unchanged function of the spraying equip
...
SLOVENSKI STANDARD
kSIST FprEN ISO 12670:2015
01-junij-2015
9URþHEUL]JDQMH6HVWDYQLGHOLVSUHPD]LQDQHVHQLPL]YURþLPEUL]JDQMHP
7HKQLþQLGREDYQLSRJRML ,62
Thermal spraying - Components with thermally sprayed coatings - Technical supply
conditions (ISO 12670:2011)
Thermisches Spritzen - Bauteile mit thermisch gespritzten Schichten - Technische
Lieferbedingungen (ISO 12670:2011)
Projection thermique - Éléments traités par projection thermique - Conditions techniques
de livraison (ISO 12670:2011)
Ta slovenski standard je istoveten z: FprEN ISO 12670
ICS:
25.220.20 Površinska obdelava Surface treatment
kSIST FprEN ISO 12670:2015 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN ISO 12670:2015
---------------------- Page: 2 ----------------------
kSIST FprEN ISO 12670:2015
EUROPEAN STANDARD
FINAL DRAFT
FprEN ISO 12670
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS Will supersede EN 15311:2007
English Version
Thermal spraying - Components with thermally sprayed coatings
- Technical supply conditions (ISO 12670:2011)
Projection thermique - Éléments traités par projection Thermisches Spritzen - Bauteile mit thermisch gespritzten
thermique - Conditions techniques de livraison (ISO Schichten - Technische Lieferbedingungen (ISO
12670:2011) 12670:2011)
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 240.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN ISO 12670:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN ISO 12670:2015
FprEN ISO 12670:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
kSIST FprEN ISO 12670:2015
FprEN ISO 12670:2015 (E)
Foreword
The text of ISO 12670:2011 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as
FprEN ISO 12670:2015 by Technical Committee CEN/TC 240 “Thermal spraying and thermally sprayed
coatings” the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document will supersede EN 15311:2007.
Endorsement notice
The text of ISO 12670:2011 has been approved by CEN as FprEN ISO 12670:2015 without any modification.
3
---------------------- Page: 5 ----------------------
kSIST FprEN ISO 12670:2015
---------------------- Page: 6 ----------------------
kSIST FprEN ISO 12670:2015
INTERNATIONAL ISO
STANDARD 12670
First edition
2011-12-01
Thermal spraying — Components with
thermally sprayed coatings — Technical
supply conditions
Projection thermique — Éléments traités par projection thermique —
Conditions techniques de livraison
Reference number
ISO 12670:2011(E)
©
ISO 2011
---------------------- Page: 7 ----------------------
kSIST FprEN ISO 12670:2015
ISO 12670:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
kSIST FprEN ISO 12670:2015
ISO 12670:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12670 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.
© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
kSIST FprEN ISO 12670:2015
---------------------- Page: 10 ----------------------
kSIST FprEN ISO 12670:2015
INTERNATIONAL STANDARD ISO 12670:2011(E)
Thermal spraying — Components with thermally sprayed
coatings — Technical supply conditions
1 Scope
This International Standard specifies technical supply conditions for parts with thermally sprayed coatings for
the manufacturing or repair of components.
This International Standard applies to applications where quality requirements according to ISO 14922-2
(comprehensive requirements) or ISO 14922-3 (standard requirements) are required.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 2063, Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys
ISO 4288, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and
procedures for the assessment of surface texture
ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method
ISO 12690, Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities
ISO 14232, Thermal spraying — Powders — Composition and technical supply conditions
ISO 14916, Thermal spraying — Determination of tensile adhesive strength
ISO 14918, Thermal spraying — Approval testing of thermal sprayers
ISO 14919, Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical
supply conditions
ISO 14923, Thermal spraying — Characterization and testing of thermally sprayed coatings
EN 473, Non destructive testing — Qualification and certification of NDT personnel — General principles
EN 657, Thermal spraying — Terminology, classification
EN 1395-1, Thermal spraying — Acceptance inspection of thermal spraying equipment — Part 1: General
requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 657 apply.
© ISO 2011 – All rights reserved 1
---------------------- Page: 11 ----------------------
kSIST FprEN ISO 12670:2015
ISO 12670:2011(E)
4 Requirements
4.1 General requirements
4.1.1 Specifying the general requirements
This International Standard, which specifies the general requirements for supply, shall be indicated in the list of
parts or in other manufacturing or delivery instructions.
4.1.2 Qualification of the manufacturer
The manufacturer of the thermally sprayed coating shall possess a quality management system, shall fulfil
all requirements stipulated in the coating specification for the part, shall employ qualified personnel and is
responsible for keeping the spraying equipment in a functional and safe condition.
Considering the following standards can help to fulfil the quality requirements for the coating:
a) spraying coordinator (supervisor): qualified according to ISO 12690;
b) thermal sprayer: qualified according to ISO 14918 or qualified by appropriate skill and knowledge;
c) non-destructive testing personnel: qualification according to EN 473;
d) spraying equipment: checked according to the relevant part of EN 1395 or qualified by the unobjectionable
and unchanged function of the spraying equipment documented by test reports or coating results.
4.1.3 Preparing the instructions for thermal spraying (spray procedure specification)
The manufacturer is responsible for preparing the spray procedure specification in written form.
The spray procedure specification shall r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.