SIST ETS 300 396-8-1 E1:2003

Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 1: Mobile Station to Mobile Station (MS-MS) Air Interface (AI)

To produce a PICS proforma for Direct Mode Operation of Mobile terminals

Prizemni snopovni radio (TETRA) - Tehnične zahteve za neposredno obratovanje (DMO) - 8. del: Izjava o skladnosti izvedbe protokola (PICS) - Proforma specifikacija - 1. poddel: Radijski vmesnik (AI) med mobilnima postajama (MS-MS)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.070.10 - Terrestrial Trunked Radio (TETRA)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Mandate: BC-T-344
• Mandate: T-172
• Ref Project: ETSI ETS 300 396-8-1 ed.1 (2000-01) - Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 1: Mobile Station to Mobile Station (MS-MS) Air Interface (AI)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 396-8-1 E1:2003
01-december-2003
3UL]HPQLVQRSRYQLUDGLR7(75$7HKQLþQH]DKWHYH]DQHSRVUHGQRREUDWRYDQMH
'02GHO,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&63URIRUPD
VSHFLILNDFLMDSRGGHO5DGLMVNLYPHVQLN$,PHGPRELOQLPDSRVWDMDPD0606
Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation
(DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma
specification; Sub-part 1: Mobile Station to Mobile Station (MS-MS) Air Interface (AI)
Ta slovenski standard je istoveten z: ETS 300 396-8-1 Edition 1
ICS:
33.070.10 Prizemni snopovni radio Terrestrial Trunked Radio
(TETRA) (TETRA)
SIST ETS 300 396-8-1 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 396-8-1 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 396-8-1 E1:2003
EUROPEAN ETS 300 396-8-1
TELECOMMUNICATION January 2000
STANDARD
Source: TETRA Reference: DE/TETRA-02007-8-1
ICS: 33.020
Key words: ICS, PICS, DMO, MS, TETRA, radio
Terrestrial Trunked Radio (TETRA);
Technical requirements for Direct Mode Operation (DMO);
Part 8: Protocol Implementation Conformance Statement (PICS)
proforma specification;
Sub-part 1: Mobile Station to Mobile Station (MS-MS)
Air Interface (AI)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: [e-mail] - http://www.etsi.org
Tel.:[phone]- Fax:[phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 2
ETS 300 396-8-1: January 2000
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Standards Making Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 3
ETS 300 396-8-1: January 2000
Contents
Foreword.5
Introduction.5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .7
3.1 Definitions .7
3.2 Abbreviations .8
4 Conformance to this Protocol Implementation Conformance Statement (PICS) proforma
specification.8
Annex A (normative): Protocol ICS proforma (PICS) for ETS 300 396-3.9
A.1 Guidance for completing the PICS proforma .9
A.1.1 Purposes and structure.9
A.1.2 Abbreviations and conventions .9
A.1.3 Instructions for completing the PICS proforma.11
A.2 Identification of the implementation.11
A.2.1 Date of the statement.11
A.2.2 IUT identification .11
A.2.3 SUT identification.11
A.2.4 Product supplier .12
A.2.5 Client (if different from product supplier).12
A.2.6 PICS contact person .12
A.3 Identification of the protocol .13
A.4 Global statement of conformance .13
A.5 DMCC at layer 3 .13
A.5.1 DMCC major capabilities .13
A.5.2 Circuit mode call .13
A.5.3 Circuit mode call set-up .14
A.5.4 Circuit mode services offered .15
A.5.5 Short data services .15
A.5.6 Type of short data service.16
A.5.7 Data transmission .17
A.5.8 SDS user defined data.17
A.5.9 DMCC PDUs.18
A.5.10 DMCC PDU parameters .19
A.5.10.1 DM-SETUP.20
A.5.10.2 DM-SETUP PRES.20
A.5.10.3 DM-CONNECT.21
A.5.10.4 DM-DISCONNECT.21
A.5.10.5 DM-CONNECT ACK .21
A.5.10.6 DM-OCCUPIED.22
A.5.10.7 DM-RELEASE .22
A.5.10.8 DM-TX CEASED .22
A.5.10.9 DM-TX REQUEST.23
A.5.10.10 DM-TX ACCEPT .23
A.5.10.11 DM-PREEMPT .23

---------------------- Page: 5 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 4
ETS 300 396-8-1: January 2000
A.5.10.12 DM-PRE ACCEPT . 23
A.5.10.13 DM-REJECT . 24
A.5.10.14 DM-INFO. 24
A.5.10.15 DM-SDS UDATA. 24
A.5.10.16 DM-SDS DATA . 25
A.5.10.17 DM-SDS ACK . 26
A.5.11 DMCC constants . 26
A.5.12 DMCC timers. 27
A.6 DLL at layer 2. 27
A.6.1 DM-Medium Access Control (MAC) features . 27
A.6.2 DM-MAC procedures. 28
A.6.3 DM-MAC PDUs .33
A.6.4 DM-MAC PDU parameters. 33
A.6.4.1 DMAC-SYNC in Signalling Channel (SCH)/S . 34
A.6.4.2 DMAC-SYNC in SCH/H . 34
A.6.4.3 DMAC-DATA. 35
A.6.4.4 DMAC-FRAG . 35
A.6.4.5 DMAC-END. 35
A.6.4.6 DMAC-U SIGNAL . 35
A.6.5 DM-MAC generated messages. 36
A.6.6 DM-MAC generated message parameters . 36
A.6.6.1 DM-RESERVED . 36
A.6.6.2 DM-SDS OCCUPIED. 36
A.6.6.3 DM-TIMING REQUEST . 37
A.6.6.4 DM-TIMING ACK . 37
A.6.7 DM-MAC constants . 37
A.6.8 DM-MAC timers. 39
History. 40

---------------------- Page: 6 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 5
ETS 300 396-8-1: January 2000
Foreword
This European Telecommunication Standard (ETS) has been produced by the Terrestrial Trunked Radio
(TETRA) Project of the European Telecommunications Standards Institute (ETSI).
The present document is part 8 of a multi-part ETS covering the Direct Mode Operation (DMO) of TETRA,
as identified below:
Part 1: "General network design";
Part 2: "Radio aspects";
Part 3: "Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol";
Part 4: "Type 1 repeater air interface";
Part 5: "Gateway air interface";
Part 6: "Security";
Part 7: "Type 2 repeater air interface";
Part 8: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 9: "Service and Description Language (SDL) model";
Part 10: "Managed Direct Mode Operation (DMO)".
Transposition dates
Date of adoption of this ETS: 31 December 1999
Date of latest announcement of this ETS (doa):
31 March 2000
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 September 2000
Date of withdrawal of any conflicting National Standard (dow): 30 September 2000
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a telecommunication specification. Such a statement
is called an Implementation Conformance Statement (ICS).

---------------------- Page: 7 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 6
ETS 300 396-8-1: January 2000
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 7
ETS 300 396-8-1: January 2000
1 Scope
This European Telecommunication Standard (ETS) provides the Protocol Implementation Conformance
Statement (PICS) proforma for the TETRA Direct Mode Operation (DMO), Mobile Station to Mobile
Station (MS-MS) Air Interface (AI) protocol, defined in ETS 300 396-3 [1] in compliance with the relevant
requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and
ETS 300 406 [2].
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 396-3 (1998): "Terrestrial Trunked Radio (TETRA); Technical
requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile
Station (MS-MS) Air Interface (AI) protocol".
[2] ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol
and profile conformance testing specifications; Standardization methodology".
[3] ISO/IEC 9646-1 (1994): "Information technology; Open systems interconnection;
Conformance testing methodology and framework; Part 1: General concepts".
[4] ISO/IEC 9646-7 (1995): "Information technology; Open Systems
Interconnection; Conformance testing methodology and framework; Part 7:
Implementation Conformance Statements".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply:
- terms defined in ETS 300 396-3 [1];
- terms defined in ISO/IEC 9646-1 [3] and in ISO/IEC 9646-7 [4].
In particular, the following terms defined in ISO/IEC 9646-1 [3] apply:
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation
or system claimed to conform to a given specification, stating which capabilities have been implemented.
The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or
system becomes an ICS
Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol
specification

---------------------- Page: 9 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 8
ETS 300 396-8-1: January 2000
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
AI Air Interface
DLL Data Link Layer
DM Direct Mode
DMCC Direct Mode Call Control
DMO Direct Mode Operation
FCS Frame Check Sequence
ICS Implementation Conformance Statement
IUT Implementation Under Test
LCH Linearization Channel
MAC Medium Access Control
OTAR Over The Air Re-keying
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
SCH Signalling Channel
SCS System Conformance Statement
SDS Short Data Service
SDU Service Data Unit
SUT System Under Test
TPNI Transmitting Party Number Identification
TSI TETRA Subscriber Identity
4 Conformance to this Protocol Implementation Conformance Statement
(PICS) proforma specification
If it claims to conform to this ETS, the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming
and ordering of the proforma items.
A PICS which conforms to this ETS shall be a conforming PICS proforma completed in accordance with
the guidance for completion given in clause A.1.

---------------------- Page: 10 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 9
ETS 300 396-8-1: January 2000
Annex A (normative): Protocol ICS proforma (PICS) for ETS 300 396-3
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of
the requirements defined in ETS 300 396-3 may provide information about the implementation in a
standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
- guidance for completing the PICS proforma;
- identification of the implementation;
- identification of the protocol;
- global statement of conformance;
- Direct Mode Call Control (DMCC) protocol layer 3 part:
- circuit mode calls;
- short data service;
- Data Link Layer (DLL) protocol layer 2 part.
A.1.2 Abbreviations and conventions
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guidelines presented in ISO/IEC 9646-7.
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It
implicitly means "is supported by the implementation?".
Status column
The following notations, defined in ISO/IEC 9646-7, are used for the status column:
m mandatory - the capability is required to be supported;
o optional - the capability may be supported or not;
n/a not applicable - in the given context, it is impossible to use the capability;
x prohibited (excluded) - there is a requirement not to use this capability in the
given context;
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is
an integer which identifies an unique group of related optional items and the
logic of their selection which is defined immediately following the table;

---------------------- Page: 11 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 10
ETS 300 396-8-1: January 2000
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on
the support of other optional or conditional items. "i" is an integer identifying a
unique conditional status expression which is defined immediately following the
table.
Reference column
The reference column makes reference to ETS 300 396-3, except where explicitly stated otherwise.
Support column
The support column shall be filled in by the supplier of the implementation. The following common
notations, defined in ISO/IEC 9646-7, are used for the support column:
Y or y supported by the implementation;
N or n not supported by the implementation;
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation
of a conditional status).
If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is
necessary to be able to answer that a capability is supported for one profile and not supported for another.
In that case, the supplier shall enter the unique reference to a conditional expression, preceded by "?"
(e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It
uses predicates defined in the System Conformance Statement (SCS), each of which refers to a single
profile and which takes the value TRUE if and only if that profile is to be used.
EXAMPLE 1: ?3: IF prof1 THEN Y ELSE N
It is also possible to provide a comment to an answer in the space provided at the bottom of the table.
NOTE: As stated in ISO/IEC 9646-7, support for a received Protocol Data Unit (PDU) requires
the ability to parse all valid parameters of that PDU. Supporting a PDU while having no
ability to parse a valid parameter is non-conformant. Support for a parameter on a
PDU means that the semantics of that parameter is supported.
Values allowed column
The values allowed column contains the type, the list, the range, or the length of values allowed. The
following notations are used:
- range of values: .
example: 5 . 20
- list of values: , , .,
example: 2, 4, 6, 8, 9
example: '1101'B, '1011'B, '1111'B
example: '0A'H, '34'H, '2F'H
- list of named values: (), (), ., (
example: reject(1), accept(2)
- length: size ( . )
example: size (1 . 8)
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the
values or the ranges of values supported by the implementation shall be indicated.

---------------------- Page: 12 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 11
ETS 300 396-8-1: January 2000
References to items
For each possible item answer (answer in the support column) within the PICS proforma a unique
reference exists, used, for example, in the conditional expressions. It is defined as the table identifier,
followed by a solidus character "/", followed by the item number in the table. If there is more than one
support column in a table, the columns are discriminated by letters (a, b, etc.), respectively.
EXAMPLE 2: A.5/4 is the reference to the answer of item 4 in table 5 of annex A.
EXAMPLE 3: A.6/3b is the reference to the second answer (i.e. in the second support column)
of item 3 in table 6 of annex A.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not
required to be completed if the predicate is FALSE.
A.1.3 Instructions for completing the PICS proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In
particular, an explicit answer shall be entered, in each of the support or supported column boxes provided,
using the notation described in subclause A.1.2.
If necessary, the supplier may provide additional comments in space at the bottom of the tables, or
separately on sheets of paper.
More detailed instructions are given at the beginning of the different subclauses of the PICS proforma.
A.2 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
A.2.1 Date of the statement
A.2.2 IUT identification
IUT name:
.........................................................................................................................................................................
IUT version:
A.2.3 SUT identification
SUT name:
.........................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................
.........................................................................................................................................................................

---------------------- Page: 13 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 12
ETS 300 396-8-1: January 2000
Operating system:
........................................................................................................................................................................
A.2.4 Product supplier
Name:
Address:
........................................................................................................................................................................
........................................................................................................................................................................
Telephone number:
Facsimile number:
E-mail address:
Additional information:
........................................................................................................................................................................
........................................................................................................................................................................
A.2.5 Client (if different from product supplier)
Name:
Address:
........................................................................................................................................................................
........................................................................................................................................................................
Telephone number:
Facsimile number:
E-mail address:
Additional information:
........................................................................................................................................................................
........................................................................................................................................................................
A.2.6 PICS contact person
(A person to contact if there are any queries concerning the content of the PICS)
Name:
Telephone number:
Facsimile number:
E-mail address:

---------------------- Page: 14 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 13
ETS 300 396-8-1: January 2000
Additional information:
.........................................................................................................................................................................
.........................................................................................................................................................................
A.3 Identification of the protocol
This PICS proforma applies to the following standard:
ETS 300 396-3 (1998): "Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode
Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol".
This ETS contains two layers of the protocol stack, DMCC at layer 3 and Data Link Layer (DLL) at layer 2.
Each layer is addressed in a different section of the present PICS. When submitting an implementation for
test, the implementer is required to answer the questions of the section(s) of the proforma pertaining to
the part(s) of the protocol submitted to the test, i.e. the DMCC section or the DLL one or both.
A.4 Global statement of conformance
Are all mandatory capabilities of DMCC implemented? (Yes/No/(n/a)).
Are all mandatory capabilities of DLL implemented? (Yes/No/(n/a)).
NOTE: Answering "No" to any of these questions indicates non-conformance to the protocol
specification. Non-supported mandatory capabilities are to be identified in the PICS,
with an explanation of why the implementation is non-conforming, on pages attached
to the PICS proforma. Answering "n/a" to any of these two questions indicates that the
questions related to that protocol does not apply.
A.5 DMCC at layer 3
A.5.1 DMCC major capabilities
The supplier of the implementation shall state the support of the implementation for each of the following
protocol services, in table A.1.
Table A.1: DMCC services
Item Service Reference Status Support
1 Circuit mode call 6.2, 4.4 o.1
2 Short Data Service (SDS) 6.3, 4.4 o.1
o.1: It is mandatory to support at least one of these items
A.5.2 Circuit mode call
The supplier of the implementation shall state the support of the implementation for each of the following
circuit mode call protocol features, in table A.2.

---------------------- Page: 15 ----------------------

SIST ETS 300 396-8-1 E1:2003
Page 14
ETS 300 396-8-1: January 2000
Table A.2: Circuit mode protocol features
Prerequisite: A.1/1 -- circuit mode call
Item Protocol features Reference Status Support
5.2 o.2
1 Group address call capab
...