SIST EN 13814-1:2019/oprA1:2023
(Amendment)Safety of amusement rides and amusement devices - Part 1: Design and manufacture
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.
Sicherheit von Fahrgeschäften und Vergnügungseinrichtungen - Teil 1: Konstruktion, Bemessung und Herstellung
Sécurité des manèges et des dispositifs de divertissement - Partie 1 : Conception et fabrication
Varnost naprav in opreme v zabaviščnih parkih - 1. del: Načrtovanje in izdelava
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13814-1:2019/oprA1:2023
01-december-2023
Varnost naprav in opreme v zabaviščnih parkih - 1. del: Načrtovanje in izdelava
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
Sicherheit von Fahrgeschäften und Vergnügungseinrichtungen - Teil 1: Konstruktion,
Bemessung und Herstellung
Sécurité des manèges et des dispositifs de divertissement - Partie 1 : Conception et
fabrication
Ta slovenski standard je istoveten z: EN 13814-1:2019/prA1
ICS:
97.200.40 Igrišča Playgrounds
SIST EN 13814-1:2019/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13814-1:2019/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN 13814-1:2019/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 13814-1:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2023
ICS 97.200.40
English Version
Safety of amusement rides and amusement devices - Part
1: Design and manufacture
Sécurité des manèges et des dispositifs de Sicherheit von Fahrgeschäften und
divertissement - Partie 1 : Conception et fabrication Vergnügungseinrichtungen - Teil 1: Konstruktion,
Bemessung und Herstellung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 152.
This draft amendment A1, if approved, will modify the European Standard EN 13814-1:2019. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13814-1:2019/prA1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13814-1:2019/oprA1:2023
EN 13814-1:2019/prA1:2023 (E)
Contents Page
European foreword . 4
1 Modification to 4.1.5, "Principles of analysis" . 5
2 Modification to 4.2.7, "Fasteners for structural components" . 5
3 Modification to 4.3.3.1.2.1, "Passenger carrying units (vehicles, cars, gondolas)" . 5
4 Modifications to 4.3.3.1.2.2, "Other vertical loads" . 5
5 Modification to 4.3.3.1.2.3, "Horizontal imposed loads" . 5
6 Modification to 4.4.2.1, "Conditions for calculating rotating type amusement
devices". 6
7 Modifications to 4.7.2, "Predominantly static stress" . 6
8 Modifications to 4.7.4, "Bolts" . 6
9 Modification to 4.7.5.1.2, "Ropes and chains under fluctuating loads (suspension of
passenger carrying devices e.g. chairs, gondolas)" . 7
10 Modifications to 5.1.4.1.1, "General" .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.