SIST EN 303 035-2:2001

• Abstract:

  Definition of requirements for TETRA V+D under R&TTE Directive

• Status: Published
• Publication Date: 30-Nov-2001
• ICS: 33.070.10 - Terrestrial Trunked Radio (TETRA)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2001
• Due Date: 01-Dec-2001
• Completion Date: 01-Dec-2001
• Mandate: M/284
• Ref Project: ETSI EN 303 035-2 V1.1.1 (2001-06) - Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 2: Direct Mode Operation (DMO)

SIST EN 303 035-2:2001 is a Slovenian standard published by SIST for Terrestrial Trunked Radio (TETRA) equipment. It specifies the technical characteristics for Direct Mode Operation (DMO) at the air interface so that TETRA mobile stations, gateways and repeaters can be assessed against the essential requirements of the R&TTE Directive. The document is aimed at equipment that uses the TETRA technology for direct radio communication without intervention of a base station.

What does SIST EN 303 035-2:2001 specify?

SIST EN 303 035-2:2001 specifies the technical characteristics for TETRA radio and telecommunication terminal equipment that supports Direct Mode Operation (DMO). It covers the DMO air interface for DM-MS, DM-GATE, DM-REP1 and DM-REP2, and it also includes the related testing approach used to check compliance.

The scope ties the standard to the frequency ranges allocated to TETRA by the named ERC decisions and to article 3.2 of Directive 1999/5/EC, where the goal is effective use of spectrum and avoidance of harmful interference. The document is organized around technical requirements in clause 4 and compliance testing in clause 5, with normative annexes for requirements, declarations and Managed DMO testing.

Annex	What it covers
Annex A	EN Requirements Table (EN-RT)
Annex B	Declarations on capabilities and parameters supported
Annex C	Test Specification for Managed DMO
Annex D	EN title in the official languages
Annex E	Justifications for requirements
Annex F	Bibliography

What are the key requirements of SIST EN 303 035-2:2001?

SIST EN 303 035-2:2001 sets out radio, protocol and security requirements by equipment type, and it links each requirement to a test method or test purpose. In practice, a supplier must declare the environmental profile, the supported capabilities and the operating modes, then show that the equipment meets the relevant tables in clause 4 and annex A.

Environmental and spectrum-related requirements

Clause 4.1 requires compliance within the declared environmental profile. That matters because the equipment is expected to meet the standard across the operating conditions the supplier declares, not only in ideal lab conditions.

Clause 4.2.1 covers frequency and channel allocation. It addresses frequency bands, synchronization, frequency source requirements and the mapping and usage of DM channels. For a designer or buyer, this is the part that confirms whether the equipment is aligned with the intended TETRA band and channel structure.

Transmit and receive performance

Clauses 4.2.2 and 4.2.3 cover transmitting and receiving functions. They include transmitter output power, unwanted conducted and radiated emissions, intermodulation attenuation, modulation accuracy, spurious response rejection, intermodulation response rejection and blocking. In practice, these are the core RF checks that show the unit can transmit cleanly and receive in the presence of interference.

The tables separate DM-MS, DM-REP1, DM-REP2 and DM-GATE, so the required performance is checked in the context of the actual role the equipment plays in DMO. That matters because a repeater or gateway is not tested as if it were only a mobile station.

Control, monitoring and security

Clause 4.2.4 covers control and monitoring functions across the radio layer, lower MAC, upper MAC, DMMM, DMCC and security functions. The standard includes requirements for channel monitoring, transmission control, call setup and disconnect behavior, registration handling, retransmission behavior and secure enable/disable functions. In practical terms, this is where interoperability and correct protocol behavior are checked, not just RF performance.

Annex A also identifies Managed DMO requirements, and annex C gives the related Managed DMO test specification. That matters for products that manage direct interworking between DM mobiles under network control.

Testing and measurement

Clause 5.1 requires radio testing under normal and extreme conditions as defined in ETSI TS 100 394-1, while protocol testing is performed within the intended environmental conditions of the IUT. Clause 5.2 requires measurement uncertainty to be reported, with values based on ETSI ETR 028. Clause 5.3 ties the standard to the essential radio and protocol test suites used for conformity assessment.

What terms does SIST EN 303 035-2:2001 define?

• Direct Mode (DM) - Simplex operation where mobile subscriber radio units communicate directly, outside the control of the TETRA V+D network.
• Direct Mode Mobile Station (DM-MS) - The mobile equipment group used to obtain TETRA DM services.
• Direct Mode GATEway (DM-GATE) - A device that provides gateway connectivity between a DM-MS and the TETRA V+D network.
• Direct Mode REPeater (DM-REP) - A device that repeats DMO signals to extend the coverage range for two or more DM-MSs.
• Direct Mode Call Control (DMCC) - The Layer 3 entity responsible for setting up and maintaining a call in DMO.
• Direct Mode Mobility Management (DMMM) - The Layer 3 entity responsible for registration to a gateway in DMO.
• Managed DMO (M-DMO) - Direct interworking between two DMO mobile stations under network control to avoid interference.

Who uses SIST EN 303 035-2:2001?

SIST EN 303 035-2:2001 is used by manufacturers and developers of TETRA DMO equipment, test laboratories, conformity assessment teams and technical regulators. It is also useful for quality managers and buyers who need to specify or verify DMO-capable mobile stations, gateways or repeaters.

In practice, users apply it to:

• design TETRA DMO radios and accessories
• plan conformance testing for RF, protocol and security behavior
• prepare capability declarations and PIXIT/PICS information
• check interoperability of MS-MS, repeater and gateway operation
• support procurement or acceptance of DMO-capable equipment

Which standards are used with SIST EN 303 035-2:2001?

The standard relies on the R&TTE Directive and on ETSI companion documents for radio tests, DMO protocol tests, security and Managed DMO. The most important references are:

• Directive 1999/5/EC (R&TTE Directive) - the regulatory basis for the essential requirements covered by the standard.
• ETSI TS 100 394-1 - radio conformance testing specification used for the radio layer tests and limit values.
• ETSI TS/ETS 300 394-4 series - protocol testing specifications for DMO MS-MS, repeaters and gateways.
• ETSI TS/ETS 300 394-5 series - security testing specifications.
• ETSI TS 100 396 series - technical requirements for DMO radio aspects, MS-MS, repeaters, gateway, security and Managed DMO.
• ETSI ETR 028 - basis for measurement uncertainty.
• ERC/DEC/(96)01 and ERC/DEC/(96)04 - frequency band decisions used in the scope.

What does the SIST EN 303 035-2:2001 document contain?

SIST EN 303 035-2:2001 contains requirement tables that map each technical requirement to a referenced clause, a technical phenomenon and a corresponding test method or test purpose. It also includes detailed test-case indices, selection expressions and parameter definitions for DM-MS, repeaters, gateways, security and Managed DMO.

The document’s testing material is structured so that conformity assessment can follow the same logic as the standard’s requirement tables. Annex C provides the Managed DMO test suite structure and abstract test suite material, including TTCN graphical and machine-processable forms.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'02Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE Directive; Part 2: Direct Mode Operation (DMO)33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 303 035-2 Version 1.1.1SIST EN 303 035-2:2001en01-december-2001SIST EN 303 035-2:2001SLOVENSKI
STANDARD
ETSIEN303035-2V1.1.1(2001-06)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);HarmonizedENforTETRAequipmentcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective;Part2:DirectModeOperation(DMO)SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)2ReferenceDEN/TETRA-02044-2KeywordsDMO,radio,regulation,TETRAETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)3ContentsIntellectualPropertyRights.6Foreword.6Introduction.71Scope.92References.103Definitionsandabbreviations.123.1Definitions.123.2Abbreviations.144Technicalrequirementsspecifications.154.1Environmentalprofile.154.2Conformancerequirements.154.2.1Requirementsassociatedwithfrequencyandchannelallocation.174.2.2Requirementsassociatedwithtransmittingfunctions.204.2.3Requirementsassociatedwithreceivingfunctions.244.2.4Requirementsassociatedwithcontrolandmonitoringfunctions.264.2.4.1Requirementsfortheradiolayer.264.2.4.2RequirementsforthelowerMAClayer.284.2.4.3ManagedDMOrequirements.294.2.4.4RequirementsfortheupperMAClayer.294.2.4.5RequirementsfortheDMMMlayer.334.2.4.6RequirementsfortheDMCClayer.344.2.4.7Requirementsforthesecurityfunctions.365Testingforcompliancewithtechnicalrequirements.375.1Environmentalconditionsfortesting.375.2Interpretationofthemeasurementresults.375.3Essentialradiotestsuites.385.3.1Referencetestspecifications.385.3.2Testconfiguration.395.3.3TestspecificationforDM-MS.405.3.3.1RadiolayertestspecificationforDM-MS.405.3.3.1.1TestcaseindexforradiolayerforDM-MS.405.3.3.1.2TestcaseselectionexpressiondefinitionsforradiolayerforDM-MS.415.3.3.1.3TestsuiteparameterdefinitionsforradiolayerforDM-MS.415.3.3.2ManagedDMOtestspecificationforDM-MS.425.3.3.2.1TestsuitestructureManagedDMO.425.3.3.2.2TestcaseindexforManagedDMO.425.3.3.2.3TestcaseselectionexpressiondefinitionsforManagedDMO.425.3.3.2.4TestsuiteparameterdefinitionsforManagedDMO.435.3.3.3UpperMAClayertestspecificationforDM-MS.435.3.3.3.1UpperMAClayertestspecificationforDM-MSforoperationMStoMS.435.3.3.3.2UpperMAClayertestspecificationforDM-MSforoperationwithDMORepeatertype1.455.3.3.3.3UpperMAClayertestspecificationforDM-MSforoperationwithDMORepeatertype2.475.3.3.3.4UpperMAClayertestspecificationforDM-MSforoperationwithDMOGateway.495.3.3.4DirectModeMobilityManagement(DMMM)testspecificationforDM-MSforoperationwithDMOGateway.505.3.3.4.1TestsuitestructureforDMMMforMS-GW.505.3.3.4.2TestcaseindexforDMMMforDM-MS.515.3.3.4.3TestcaseselectionexpressiondefinitionsDMMMforDM-MS.515.3.3.4.4TestsuiteparameterdefinitionsforDMMMforDM-MS.515.3.3.5DirectModeCallControl(DMCC)testspecificationforDM-MS.525.3.3.5.1DMCCtestspecificationforDM-MSforoperationMStoMS.525.3.3.5.2DMCCtestspecificationforDM-MSforoperationwithDMORepeatertype1.555.3.3.5.3DMCCtestspecificationforDM-MSforoperationwithDMORepeatertype2.57SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)45.3.3.5.4DMCCtestspecificationforDM-MSforoperationwithDMOGateway.585.3.3.6Securitytestspecification.615.3.3.6.1TestsuitestructureforDMOsecurityforDM-MS.615.3.3.6.2TestcaseindexforDMOsecurityforDM-MS.615.3.3.6.3TestcaseselectionexpressiondefinitionsforDMOsecurityforDM-MS.615.3.3.6.4TestsuiteparameterdefinitionsforDMOsecurityforDM-MS.625.3.4TestspecificationforDM-REP1.625.3.4.1RadiolayertestspecificationforDM-REP1.625.3.4.1.1TestcaseindexforradiolayerforDM-REP1.625.3.4.1.2TestcaseselectionexpressiondefinitionsforradiolayerforDM-REP1.645.3.4.1.3TestsuiteparameterdefinitionsforradiolayerforDM-REP1.645.3.4.2UpperMAClayertestspecificationforDM-REP1.645.3.4.2.1TestsuitestructureforUpperMAClayerforDM-REP1.645.3.4.2.2TestcaseindexforUpperMAClayerforDM-REP1.655.3.4.2.3TestcaseselectionexpressiondefinitionsforUpperMAClayerforDM-REP1.655.3.4.2.4TestsuiteparameterdefinitionsforUpperMAClayerforDM-REP1.655.3.5TestspecificationforDM-REP2.665.3.5.1RadiolayertestspecificationforDM-REP2.665.3.5.1.1TestcaseindexforradiolayerforDM-REP2.665.3.5.1.2TestcaseselectionexpressiondefinitionsforradiolayerforDM-REP2.685.3.5.1.3TestsuiteparameterdefinitionsforradiolayerforDM-REP2.685.3.5.2UpperMAClayertestspecificationforDM-REP2.685.3.5.2.1TestsuitestructureforUpperMAClayerforDM-REP2.685.3.5.2.2TestcaseindexforUpperMAClayerforDM-REP2.695.3.5.2.3TestcaseselectionexpressiondefinitionsforUpperMAClayerforDM-REP2.695.3.5.2.4TestsuiteparameterdefinitionsforUpperMAClayerforDM-REP2.695.3.6TestspecificationforDM-GATE.705.3.6.1RadiolayertestspecificationforDM-GATE.705.3.6.1.1TestcaseindexforradiolayerforDM-GATE.705.3.6.1.2TestcaseselectionexpressiondefinitionsforradiolayerforDM-GATE.715.3.6.1.3TestsuiteparameterdefinitionsforradiolayerforDM-GATE.71AnnexA(normative):TheENRequirementsTable(EN-RT).72A.1Generalcapabilitiesofequipment.73A.1.1Typeofequipment.73A.1.2ModesofoperationforDM-MS.73A.1.3Protocollayers.74A.1.4Servicesandcapabilities.75A.1.4.1ServicesandcapabilitiesforDM-MS.75A.1.4.2ServicesandcapabilitiesforDM-REP1.77A.1.4.3ServicesandcapabilitiesforDM-REP2.78A.1.4.4ServicesandcapabilitiesforDM-GATE.78A.1.5Environmentalprofile.78A.2Radiolayerrequirements.79A.2.1Radiolayerrequirementsassociatedwithfrequencyandchannelallocation.79A.2.2Radiolayerrequirementsassociatedwithtransmittingfunctions.81A.2.3Radiolayerrequirementsassociatedwithreceivingfunctions.82A.2.4Radiolayerrequirementsassociatedwithcontrolandmonitoringfunctions.82A.3MediumAccessControl(MAC)layerrequirements.82A.3.1LowerMAC.82A.3.2ManagedDMO.82A.3.3UpperMAC.82A.3.3.1UpperMACforDM-MS.82A.3.3.2UpperMACforDM-REP1.82A.3.3.3UpperMACforDM-REP2.82A.3.3.4UpperMACforDM-GATE.82A.4DirectModeMobilityManagement(DMMM)requirements.82A.5DirectModeCallControl(DMCC)requirements.82A.5.1DMCCforDM-MS.82SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)5A.5.2DMCCforDM-GATE.82A.6Security.82A.6.1Secureenable/disable.82AnnexB(normative):Declarationsoncapabilitiesandparameterssupported.82B.1Radiolayer.82B.2ManagedDirectModeOperation(M-DMO).82B.3MediumAccessControl(MAC).82B.3.1UpperMACforDM-MS.82B.3.1.1UpperMACforDM-MSforoperationMStoMS.82B.3.1.2UpperMACforDM-MSforoperationwithDMORepeatertype1.82B.3.1.3UpperMACforDM-MSforoperationwithDMORepeatertype2.82B.3.1.4UpperMACforDM-MSforoperationwithDMOGateway.82B.3.2UpperMACforDMORepeatertype1.82B.3.3UpperMACforDMORepeatertype2.82B.4DirectModeMobilityManagement(DMMM).82B.5DirectModeCallControl(DMCC).82B.5.1DMCCforDM-MSforoperationMStoMS.82B.5.2DMCCforDM-MSforoperationwithDMORepeatertype1.82B.5.3DMCCforDM-MSforoperationwithDMORepeatertype2.82B.5.4DMCCforDM-MSforoperationwithDMOGateway.82B.6Security.82AnnexC(normative):TestSpecificationforManagedDMO.82C.1Introduction.82C.2TestsuitestructureandTestPurposes(TSS&TP).82C.2.1TestSuiteStructure(TSS).82C.2.2Testpurposes.82C.2.2.1M-DMO-MSMAC(M_DMO_MSMS_MAC)tests.82C.2.2.1.1M-DMO-MSMACcapabilitytests.82C.3AbstractTestSpecificationforManagedDMO.82C.3.1AbstractTestMethod(ATM)forManagedDMO.82C.3.2AbstractTestSuite(ATS)forManagedDMO.82C.3.2.1TheTTCNGraphicalform(TTCN.GR).82C.3.2.2TheTTCNMachineProcessableform(TTCN.MP).82AnnexD(informative):TheENtitleintheofficiallanguages.82AnnexE(informative):Justificationsforrequirements.82AnnexF(informative):Bibliography.82History.82SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheDirective1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity("R&TTEDirective")[1].Thepresentdocumentispart2ofamulti-partdeliverablecoveringHarmonizedENforTETRAequipmentcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective,asidentifiedbelow:Part1:"VoiceplusData(V+D)";Part2:"DirectModeOperation(DMO)".NationaltranspositiondatesDateofadoptionofthisEN:22June2001DateoflatestannouncementofthisEN(doa):30September2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31March2002DateofwithdrawalofanyconflictingNationalStandard(dow):31March2002SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)7IntroductionThepresentdocumentispartofasetofstandardsdesignedtofitinamodularstructuretocoverallradioandtelecommunicationsterminalequipmentundertheR&TTEDirective[1].Eachstandardisamoduleinthestructure.Themodularstructureisshowninfigure1.NewstandardsforhumanexposuretoElectromagneticFieldsand,ifneeded,newstandardsforacousticsafetyUseofspectrum*IfneededScopedbyequipmentclassortypeScopedbyfrequencyand/orequipmenttypeDisability*Privacy*Fraud*Noharmtothenetwork*Emergency*Interworkingviathenetwork*Interworkingwiththenetwork*Non-radioRadio(RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadioProductEMCExistingEMCstandardstobereplacedbyanew,single,multi-partstandardGenericandproductstandardsalsonotifiedunderEMCDirectiveStandardsalsonotifiedunderLVDirective3.1aNewradioharmonizedstandardsSpectrumEMCSafetyFigure1:ModularstructureforthevariousstandardsusedundertheR&TTEDirectiveSIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)8Thelefthandedgeofthefigureshowsthedifferentclausesofarticle3oftheR&TTEDirective[1].Forarticle3.3varioushorizontalboxesareshown.DottedlinesindicatethatatthetimeofpublicationofthepresentdocumentessentialrequirementsintheseareashavetobeadoptedbytheCommission.Ifsuchessentialrequirementsareadopted,andasfarandaslongastheyareapplicable,theywilljustifyindividualstandardswhosescopeislikelytobespecifiedbyfunctionorinterfacetype.Theverticalboxesshowthestandardsunderarticle3.2fortheuseoftheradiospectrumbyradioequipment.Thescopesofthesestandardsarespecifiedeitherbyfrequency(normallyinthecasewherefrequencybandsareharmonized)orbyradioequipmenttype.Forarticle3.1bthediagramshowsthenewsinglemulti-partproductEMCstandardforradio,andtheexistingcollectionofgenericandproductstandardscurrentlyusedundertheEMCDirective[2].Thepartsofthepresentdocumentwillbecomeavailableinthesecondhalfof2000,andtheexistingseparateproductEMCstandardswillbeuseduntilitisavailable.Forarticle3.1athediagramshowstheexistingsafetystandardscurrentlyusedundertheLVDirective[3]andnewstandardscoveringhumanexposuretoelectromagneticfields.Newstandardscoveringacousticsafetymayalsoberequired.Thebottomofthefigureshowstherelationshipofthestandardstoradioequipmentandtelecommunicationsterminalequipment.Aparticularequipmentmayberadioequipment,telecommunicationsterminalequipmentorboth.Aradiospectrumstandardwillapplyifitisradioequipment.Anarticle3.3standardwillapplyaswellonlyiftherelevantessentialrequirementundertheR&TTEDirective[1]isadoptedbytheCommissionandiftheequipmentinquestioniscoveredbythescopeofthecorrespondingstandard.Thus,dependingonthenatureoftheequipment,theessentialrequirementsundertheR&TTEDirective[1]maybecoveredinasetofstandards.Themodularityprinciplehasbeentakenbecause:-itminimizesthenumberofstandardsneeded.Becauseequipmentmay,infact,havemultipleinterfacesandfunctionsitisnotpracticabletoproduceasinglestandardforeachpossiblecombinationoffunctionsthatmayoccurinanequipment;-itprovidesscopeforstandardstobeadded:-underarticle3.2whennewfrequencybandsareagreed;or-underarticle3.3shouldtheCommissiontakethenecessarydecisions;withoutrequiringalterationofstandardsthatarealreadypublished;-itclarifies,simplifiesandpromotestheusageofHarmonizedStandardsastherelevantmeansofconformityassessment.SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)91ScopeThepresentdocumentspecifiesthetechnicalcharacteristicstobeprovidedbyTerrestrialTrunkedRadio(TETRA)radioandtelecommunicationsterminalequipment,whichusestheTETRAtechnologyforDirectModeOperationattheairinterfacetosupporttheDirectModeOperation(DMO)functionality.ThepresentdocumentappliesattheTETRADirectModeOperation(DMO)Airinterfaceofthefollowingradioandtelecommunicationsterminalequipmenttypes:1)TETRADirectModeMobileStation(DM-MS);2)TETRADirectModeGateway(DM-GATE);3)TETRADirectModeRepeatertype1(DM-REP1);4)TETRADirectModeRepeatertype2(DM-REP2).InadditiontothebasictechnicalcharacteristicsofaDM-MSrequiredforoperationwithanotherDM-MS(MS-MS),thetechnicalcharacteristicsforoperationwithDM-GATE(MS-GW),DM-REP1(MS-REP1)andDM-REP2(MS-REP2)arespecified.Itappliestoterminalequipmentoperatingwithinthefrequencyranges,allocatedtoTETRAbytheERCDecisionsERC/DEC/(96)01[33]andERC/DEC/(96)04[34].Theseradioequipmenttypesarecapableofoperatinginalloranypartofthefrequencybandsgivenintable1.Table1:RadiocommunicationsservicefrequencybandsTypeofServiceRadiocommunicationsservicefrequencybands(MHz)EmergencyAccess,ERC/DEC/(96)01[33]380to385EmergencyAccess,ERC/DEC/(96)01[33]390to395CivilAccess,ERC/DEC/(96)04[34]410to430CivilAccess,ERC/DEC/(96)04[34]870to876CivilAccess,ERC/DEC/(96)04[34]915to921CivilAccess,ERC/DEC/(96)04[34]450to470CivilAccess,ERC/DEC/(96)04[34]385to390CivilAccess,ERC/DEC/(96)04[34]395to399,99ThepresentdocumentisintendedtocovertheprovisionsofDirective1999/5/EC(R&TTEDirective)[1],article3.2,whichstatesthat"….radioequipmentshallbesoconstructedthatiteffectivelyusesthespectrumallocatedtoterrestrial/spaceradiocommunicationsandorbitalresourcessoastoavoidharmfulinterference".Inadditiontothepresentdocument,otherENsthatspecifytechnicalrequirementsinrespectofessentialrequirementsunderotherpartsofarticle3oftheR&TTEDirective[1]willapplytoequipmentwithinthescopeofthepresentdocument.NOTE:AlistofsuchENsisincludedonthewebsitehttp://www.newapproach.org/.SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)102ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]Directive1999/5/ECoftheEuropeanParliamentandoftheCouncilof9March1999onradioequipmentandtelecommunicationsterminalequipmentandthemutualrecognitionoftheirconformity(R&TTEDirective).[2]CouncilDirective89/336/EECof3May1989ontheapproximationofthelawsoftheMemberStatesrelatingtoelectromagneticcompatibility(EMCDirective).[3]CouncilDirective73/23/EECof19February1973ontheharmonizationofthelawsofMemberStatesrelatingtoelectricalequipmentdesignedforusewithincertainvoltagelimits(LVDirective).[4]ETSITS100394-1(V2.3.1):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part1:Radio".[5]ETSIETS300394-4-1(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part1:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[6]ETSIETS300394-4-2(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part2:AbstractTestSuite(ATS)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[7]ETSITS100394-4-3(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part3:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStation(MS)Repeatertype1".[8]ETSITS100394-4-4(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part4:TestSuiteStructureandTestPurposes(TSS&TP)forDirectModeRepeater(DM-REP)type1".[9]ETSITS100394-4-5(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part5:AbstractTestSuite(ATS)forMobileStation(MS)Repeatertype1".[10]ETSITS100394-4-6(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part6:AbstractTestSuite(ATS)forDirectModeRepeater(DM-REP)type1".[11]ETSIETS300394-4-7(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part7:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStationtoGateway(MS-GW)AirInterface(AI)".[12]ETSIETS300394-4-8(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part8:TestSuiteStructureandTestPurposes(TSS&TP)forDirectModeGateway(DM-GATE)".SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)11[13]ETSIETS300394-4-9(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part9:AbstractTestSuite(ATS)forMobileStation(MS)Gateway".[14]ETSIETS300394-4-10(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part10:AbstractTestSuite(ATS)forDirectModeGateway(DM-GATE)".[15]ETSITS100394-4-11(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part11:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStationRepeatertype2".[16]ETSITS100394-4-12(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part12:TestSuiteStructureandTestPurposes(TSS&TP)forRepeatertype2".[17]ETSITS100394-4-13(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part13:AbstractTestSuite(ATS)forMobilestationRepeatertype2".[18]ETSITS100394-4-14(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part14:AbstractTestSuite(ATS)forRepeatertype2".[19]ETSIETS300394-5-1(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part1:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[20]ETSIETS300394-5-2(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part2:ProtocoltestingspecificationforTETRAsecurity".[21]ETSIETS300394-5-3(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part3:AbstractTestSuite(ATS)".[22]ETSIETS300396-2(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part2:Radioaspects".[23]ETSIETS300396-3(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part3:MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol".[24]ETSITS100396-4(V1.2.1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part4:Type1repeaterairinterface".[25]ETSIETS300396-5(Edition1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part5:Gatewayairinterface".[26]ETSIETS300396-6(Edition1,1998):"TerrestrialTrunkedRadio(TETRA);DirectModeOperation(DMO);Part6:Security".[27]ETSITS100396-7(V1.2.1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part7:Type2repeaterairinterface".[28]ETSIETS300396-8-1(Edition1,2001):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part1:MobileStationtoMobileStation(MS-MS)AirInterface(AI)".[29]ETSITS100396-8-2(V1.2.1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part2:Type1repeaterAirInterface(AI)".SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)12[30]ETSIETS300396-8-3(Edition1,1999):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part3:GatewayAirInterface(AI)".[31]ETSITS100396-8-4(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part4:Type2RepeaterAirInterface(AI)".[32]ETSITS100396-10(V1.1.1,2000):"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part10:ManagedDirectModeOperation(M-DMO)".[33]CEPTERC/DEC/(96)01:"ERCDecisionof7March1996ontheharmonizedfrequencybandtobedesignatedfortheintroductionoftheDigitalLandMobileSystemfortheEmergencyServices".[34]CEPTERC/DEC/(96)04:"ERCDecisionof7March1996onthefrequencybandsfortheintroductionoftheTransEuropeanTrunkedRadioSystem(TETRA)".[35]ETSIETR028(Edition2,1994):"RadioEquipmentandSystems(RES);Uncertaintiesinthemeasurementofmobileradioequipmentcharacteristics".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgivenintheR&TTEDirective[1],andthefollowingapply.acknowledgeddatatransfer:serviceprovidedbythelayerbelowwhichgivesanacknowledgementbackovertheairinterfacefromthelowerlayerpeerentity.Thisserviceisusedbythelayer3entitiestogetasecuretransmissionincludingre-transmissionschangeover:withinacall,theprocessofeffectingatransferofthemasterrole(andhencetransmittingMS)attheendofonecalltransactionsothatanothercancommenceDirectMode(DM):modeofsimplexoperationwheremobilesubscriberradiounitsmaycommunicateusingradiofrequencieswhichmaybemonitoredby,butwhichareoutsidethecontrolof,theTETRAV+Dnetwork.DMisperformedwithoutinterventionofanybasestationDirectModeCallControl(DMCC):Layer3entityresponsibleforsettingupandmaintainingacallinDMODirectModechannel:specificgroupingoftimeslotsintheDMmultiplexstructurerelatedtoaparticularDMRFcarrieri.e.DMfrequency(ortoapairofduplex-spacedRFcarriersforoperationwithatype1Bortype2DM-REP).Thegroupingmaynotalwaysbefixed,butinDMOwhenoperatinginfrequencyefficientmodeasanexample,therearetwoDMchannels,identifiedbythelettersAandBDirectModeGATEway(DM-GATE):devicewhichprovidesgatewayconnectivitybetweenaDM-MSandtheTETRAV+Dnetwork.ThegatewayprovidestheinterfacebetweenTETRADMOandTETRAV+DmodeDirectModeMobilityManagement(DMMM):Layer3entityresponsibleforregistrationtoagatewayinDMODirectModeMobileStation(DM-MS):physicalgroupingthatcontainsallofthemobileequipmentthatisusedtoobtainTETRADMservicesDirectModeREPeater(DM-REP):devicethatoperatesinTETRADMOandprovidesarepeaterfunctiontoenabletwoormoreDM-MSstoextendtheircoveragerange.ItmaybeeitheraDM-REPtype1,supportingasinglecallontheairinterface,oraDM-REPtype2,supportingtwocallsontheairinterface.ADM-REPtype1mayoperateoneitherasingleRFcarrier(DM-REPtype1A)orapairofduplex-spacedRFcarriers(DM-REPtype1B).ADM-REPtype2operatesonapairofduplex-spacedRFcarriersDM-REPpresencesignal:messagetransmittedbyaDM-REPinordertoindicateitspresenceonanRFcarrierSIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)13DM-REPtype1:DMORepeaterthatsupportsasinglecallontheairinterface.Therearetwovarietiesoftype1DM-REP:-DM-REPtype1A:whichoperatesonasingleRFcarrier;-DM-REPtype1B:whichoperatesonapairofduplex-spacedRFcarriers,oneusedasthe"uplink"fromDM-MSstotheDM-REPandtheotherusedasthe"downlink"fromtheDM-REPtoDM-MSsDM-REPtype2:DMORepeaterthatiscapableofsupportingtwosimultaneoustype2callsontheairinterface.Atype2DM-REPoperatesonapairofduplex-spacedRFcarriers,oneusedasthe"uplink"fromDM-MSstotheDM-REPandtheotherusedasthe"downlink"fromtheDM-REPtoDM-MSs.Theprotocolfortype2callsthroughatype2DM-REPisbasedontheprotocolforfrequencyefficientmodeinETS300396-3[23].(ADM-REPtype2mayalsooptionallyoffertype1BcallsusingtheprotocoldefinedinETSITS100396-4[24])environmentalprofile:rangeofenvironmentalconditionsunderwhichequipmentwithinthescopeofthepresentdocumentisrequiredtocomplywiththeprovisionsofthepresentdocumentIndividualTETRASubscriberIdentity(ITSI):identityusedtospecifyanindividualTETRAuser.AnITSIcannotbesharedbymultipleusersLinearizationCHannel(LCH):channel,whichmaybeusedbytheequipmenttolinearizeitstransmitter.Thelinearizationburstcontainsnousefulbitslogicalchannel:generictermforanydistinctdatapath.LogicalchannelsareconsideredtooperatebetweenlogicalendpointsManagedDMO(M-DMO):directinterworkingbetweentwoDMOMobileStationsundercontrolofanetworkbyamanagementmechanismtoavoidinterferencemaster:DirectModeequipmentthatiseitheractiveinacalltransactiontransmittingtrafficorcontroldata,orisreservingthechannelbymeansofchannelreservationsignallingandhenceisprovidingsynchronizationinformationtothechannelpresencesignal:messagetransmittedbyaDM-REPoragatewayinordertoindicateitspresenceonanRFcarrierRandomChallenge(RAND1,RAND2):randomvaluegeneratedbytheinfrastructuretoauthenticateauserorinanMStoauthenticatetheinfrastructure,respectivelyRandomSeed(RS):randomvalueusedtoderiveasessionauthenticationkeyfromtheauthenticationkeyResponse(RES1,RES2):valuecalculatedintheMSfromRAND1andasessionkeytoprovetheauthenticityofausertotheinfrastructureorbytheinfrastructurefromRAND2andasessionkeytoproveitsauthenticitytoauser,respectivelyslave:DirectModeequipmentthatisreceivingtrafficand/orsignallingandhenceisderivingsynchronizationinformationfromthechannelsolicitedregistration:registrationrequestwhichismadebyaDM-MSduringaregistrationphaseinitiatedbyagatewaysurveillance:processofdeterminingthecurrentstateoftheDMRFcarrierforDMOTETRAEquipmentIdentity(TEI):electronicserialnumberthatispermanentlyembeddedintheTETRAequipmentunacknowledgeddatatransfer:serviceprovidedbythelayerbelowwhichdoesnotgiveanyacknowledgementbacktoovertheairinterfacefromthelowerlayerpeerentityusefulpartoftheburst:modulationsymboltimesSN0toSNmaxofaburstunsolicitedregistration:registrationrequest,whichismadebyaDM-MSatanytimeotherthanwithinaregistrationphaseSIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)143.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATSAbstractTestSuiteBIBehaviourInvalidBSBaseStationBVBehaviourValidCACApabilitytestCMCircuitModeCTControlofTransmissionCUChannelUsageDMDirectModeDM-GATEDirectModeGATEwayDM-MSDirectModeMobileStationDM-REPDirectModeREPeaterDM-REP1DirectModeREPeatertype1DM-REP2DirectModeREPeatertype2DMCCDirectModeCallControlDMMMDirectModeMobilityManagementDMODirectModeOperationEMCElectro-MagneticCompatibilityENEuropeanNormeEN-RTENRequirementTableETSEuropeanTelecommunicationStandardFCSFrameCheckSequenceGWGateWayIDIDlechannelIMPIMPlicitITSIIndividualTETRASubscriberIdentityIUTImplementationUnderTestL3Layer3LCHLinearizationCHannelLVLowVoltageM-DMOManagedDMOMACMediumAccessControlMNIMobileNetworkIdentityMSMobileStationMS-GWMobileStationtoGateWayoperationMS-MSMobileStationtoMobileStationoperationMS-REP1MobileStationtoREPeatertype1operationMS-REP2MobileStationtoREPeatertype2operationMSMSMobileStationtoMobileStationNWKNetWorKlayerPDPermanentDisablePDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingR&TTERadioandTelecommunicationsTerminalEquipmentRAND1RANDomchallenge1RERadioEquipmentRES2RESponse2RFRadioFrequencyROReceiveOccupationRRReceiveReservationRSRandomSeedRTRequirementsTablessecondsSCHSignallingCHannelSIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)15SCH/FSignallingCHannel,Full-slotSCH/HSignallingCHannel,Half-slotSCH/SSignallingCHannel,SynchronizationSDSShortDataServicesSDUServiceDataUnitSecSecuritySEDSecureEnable/DisableSMSignallingMessagesSSIShortSubscriberIdentitySTCHSTealingCHannelSwMISwitchingandManagementInfrastructureTARTARgetTCHTrafficCHannelTEITETRAEquipmentIdentityTETRATErrestrialTrunkedRAdioTITImerTSSTestSuiteStructureTPTestPurposeTRTransmitReservationTTCNTreeandTabularCombinedNotationTXOTransmitOccupationV+DVoiceandData4Technicalrequirementsspecifications4.1EnvironmentalprofileThetechnicalrequirementsofthepresentdocumentapplyundertheenvironmentalprofileforoperationoftheequipment,whichshallbedeclaredbythesupplier.Toavoidunnecessaryinterferenceintheradiospectrum,theequipmentshallcomplywithallthetechnicalrequirementsofthepresentdocumentatalltimeswhenoperatingwithintheboundarylimitsofthedeclaredoperationalenvironmentalprofile.4.2ConformancerequirementsThisclausereferencestheconformancerequirementsbycross-referencetotherequirementsinthestandardsspecifyingTETRA.Italsocontainsareferencetotherelevanttesttoverifycompliancewiththerequirement.NOTE:Thisclausedoesnotspecifytheexactstatus(e.g.mandatoryoroptional)ofthelistedfeatures,servicesandrequirements.ThisisspecifiedintheENRequirementsTables(EN-RT)inannexA.Thefollowingtableheadingsareapplicabletothetablesinthisclause:Requirementreference:Referencefortherequirementwithinthepresentdocument.Standardreference:Referencetoclause(s)inthereferencestandardspecification.Description:Ashortdescriptionoftherequirement.Technicalphenomena:Associatedtechnicalphenomena,asdefinedinannexAofEG201399(seeannexF).Testcaselimitvalue:Forradiolayertables;Referencetotestcaselimitvaluestobeappliedforcomplianceverification.Testmethodreference:Forradiolayertables;Referencetorelevanttestmethodtoperformcomplianceverificationfortherequirement.SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)16Testpurposereference:Fornon-radiolayertables;Referencetotestpurposetoassesscompliancewiththerequirement.Testcasereference:Fornon-radiolayertables;Referencetorelevanttestcasetoperformcomplianceverificationfortherequirement.SIST EN 303 035-2:2001

ETSIETSIEN303035-2V1.1.1(2001-06)174.2.1RequirementsassociatedwithfrequencyandchannelallocationTable2:GeneralrequirementsassociatedwithfrequencybandallocationRequirementreferenceStandardreferenceDescriptionTechnicalphenomenaTestcaselimitvalueTestmethodreference4.2.1/1ERC/DEC/(96)01[33]HarmonizedfrequencybandfortheDigitalLandMobileSystemfortheEmergencyServices.Frequencyerror/stability-Implicitbyotherradiolayertesting4.2.1/2ERC/DEC/(96)04[34]FrequencybandsfortheTransEuropeanTrunkedRadioSystem(TETRA).Frequencyerror/stability-ImplicitbyotherradiolayertestingTable3:RequirementsassociatedwithfrequencyandchannelallocationforDM-MSRequirementreferenceStandardreference(note1)DescriptionTechnicalphenomenaTestcaselimitvalue(note2)Testmethodreference(note3)4.2.1/36.2Frequencybandsandchannelarrangements.Frequencyerror/stability-ImplicitbyF.6.4.34.2.1/47.2DM-MSsynchronizationrequirement.Frequencyerror/stability-ImplicitbyMAClayertestin
...