SIST EN IEC 61753-111-07:2021
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 111-07: Sealed closures - Category A - Aerial (IEC 61753-111-07:2021)
Fibre optic interconnecting devices and passive components - Performance standard - Part 111-07: Sealed closures - Category A - Aerial (IEC 61753-111-07:2021)
This part of IEC 61753 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category A - Aerial, as defined in Table A.13 of IEC 61753-1:2018.
Free breathing closures are not covered in this document.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 111-07: Druckdichte Muffen für die Kategorie A - Luftverlegung (IEC 61753-111-07:2021)
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 111-07: Boîtiers étanches pour la catégorie A - Aériens (IEC 61753-111-07:2021)
IEC 61753-111-07:2021 contient les essais minimaux, ainsi que les sévérités d’essai et les exigences de mesure minimales auxquels il est nécessaire qu’un boîtier à fibres optiques étanche satisfasse afin de pouvoir être classé comme satisfaisant à la norme IEC pour la catégorie A – Aériens, telle qu’elle est définie dans le Tableau A.13 de l’IEC 61753‑1:2018. Les boîtiers à ventilation libre ne sont pas couverts par le présent document. Cette première édition annule et remplace l’IEC 61753-111-7 parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 61753‑111‑7:
a. mise à jour des termes et définitions conformément à l’IEC 61753-1:2018 et à l’IEC 61756‑1:2019;
b. ajout des sévérités détaillées pour les essais de résistance des matériaux à la lumière UV et aux moisissures;
c. mise à jour des sévérités d’essai selon la nouvelle édition de l’IEC 61753-1:2018;
d. modification à 20 kPa de la surpression d’essai pour les essais d’étanchéité;
e. ajout du critère d’acceptation/de rejet de la perte de pression en cours d’essai aux essais d’étanchéité mécanique;
f. harmonisation des conditions d’essai en laboratoire avec l’IEC 61300-1 à une température de +23 °C ± 5 °C, sauf spécification contraire;
g. ajout des fibres de type B-657. rayon de courbure minimal des fibres stockées conformément à l’IEC 61756-1:2019;
h. modification de l’essai d’étanchéité aux vibrations (fréquence de 10 Hz, amplitude de 3 mm et 1 000 000 cycles);
i. ajout de charges réduites dans l’essai de rétention du câble pour les câbles et les tubes de petit diamètre;
j. ajout de charges réduites pour l’essai de compression axiale du câble pour les câbles et les tubes de petit diamètre;
k. ajout de la durée des cycles dans l’essai de torsion et de courbure;
l. suppression de l’essai de chute libre (couvert désormais par l'essai de choc optique);
m. réduction à 5 cycles de la durée d’essai de montage et de démontage;
n. réduction à 12 cycles de la durée de variations de température.
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 111-07. del: Zatesnjene spojnice - Kategorija A - Nadzemna uporaba (IEC 61753-111-07:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61753-111-07:2021
01-december-2021
Nadomešča:
SIST EN 61753-111-7:2010
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 111-07. del:
Zatesnjene spojnice - Kategorija A - Nadzemna uporaba (IEC 61753-111-07:2021)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 111-07: Sealed closures - Category A - Aerial (IEC 61753-111-07:2021)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
111-07: Druckdichte Muffen für die Kategorie A - Luftverlegung (IEC 61753-111-07:2021)
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance -
Partie 111-07: Boîtiers étanches pour la catégorie A - Aériens (IEC 61753-111-07:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-111-07:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-111-07:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61753-111-07:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-111-07:2021
EUROPEAN STANDARD EN IEC 61753-111-07
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 33.180.20 Supersedes EN 61753-111-7:2010 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 111-07: Sealed closures - Category
A - Aerial
(IEC 61753-111-07:2021)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 111-07: Bauteile - Betriebsverhalten - Teil 111-07: Druckdichte
Boîtiers étanches pour la catégorie A - Aériens Muffen für die Kategorie A - Luftverlegung
(IEC 61753-111-07:2021) (IEC 61753-111-07:2021)
This European Standard was approved by CENELEC on 2021-10-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-111-07:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-111-07:2021
EN IEC 61753-111-07:2021 (E)
European foreword
The text of document 86B/4493/FDIS, future edition 1 of IEC 61753-111-07, prepared by SC 86B
“Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61753-111-07:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–07–08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022–10–08
document have to be withdrawn
This document supersedes EN 61753-111-7:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-111-07:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-1 NOTE Harmonized as EN 60068-1
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC 60721-3-2 NOTE Harmonized as EN IEC 60721-3-2
IEC 60793-2 NOTE Harmonized as EN IEC 60793-2
IEC 60794-1-2 NOTE Harmonized as EN IEC 60794-1-2
IEC 60794-2 NOTE Harmonized as EN 60794-2
IEC 60794-3 NOTE Harmonized as EN 60794-3
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 62005 (series) NOTE Harmonized as EN IEC 62005 (series)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61753-111-07:2021
EN IEC 61753-111-07:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-10 - Environmental testing - Part 2–10: Tests - EN 60068-2-10 -
Test J and guidance: Mould growth
IEC 60793-2-50 - Optical fibres - Part 2–50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2–1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2–5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2–9: Tests
- Shock
IEC 61300-2-11 - Fibre optic interconnecting devices and EN 61300-2-11 -
passive components - Basic test and
measurement procedures - Part 2–11:
Tests - Axial compression
IEC 61300-2-12 - Fibre optic interconnecting devices and EN 61300-2-12 -
passive components - Basic test and
measurement procedures - Part 2–12:
Tests - Impact
3
---------------------- Page: 5 ----------------------
SIST EN IEC 61753-111-07:2021
EN IEC 61753-111-07:2021 (E)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures - Part 2–26:
Tests - Salt mist
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 -
passive components - Basic test and
measurement procedures - Part 2–33:
Tests - Assembly and disassembly of fibre
optic mechanical splices, fibre
management systems and closures
IEC 61300-2-34 - Fibre optic interconnecting devices and EN 61300-2-34 -
passive components - Basic test and
measurement procedures - Part 2–34:
Tests - Resistance to solvents and
contaminating fluids of interconnecting
components and closures
IEC 61300-2-37 - Fibre optic interconnecting devices and EN 61300-2-37 -
passive components - Basic test and
measurement procedures - Part 2–37:
Tests - Cable bending for fibre optic
closures
IEC 61300-2-38 - Fibre optic interconnecting devices and EN 61300-2-38 -
passive components - Basic test and
measurement procedures - Part 2–38:
Tests - Sealing for pressurized fibre optic
closures
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures - Part 3–1:
Examinations and measurements - Visual
examination
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3–3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3–28:
Examinations and measurements -
Transient loss
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
IEC 61756-1 2019 Fibre optic interconnecting devices and EN IEC 61756-1 2020
passive components - Interface standard
for fibre management systems - Part 1:
General and guidance
4
---------------------- Page: 6 ----------------------
SIST EN IEC 61753-111-07:2021
EN IEC 61753-111-07:2021 (E)
ISO 4892-3 - Plastics - Methods of exposure to EN ISO 4892-3 -
laboratory light sources - Part 3:
Fluorescent UV lamps
5
---------------------- Page: 7 ----------------------
SIST EN IEC 61753-111-07:2021
---------------------- Page: 8 ----------------------
SIST EN IEC 61753-111-07:2021
IEC 61753-111-07
®
Edition 1.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 111-07: Sealed closures – Category A – Aerial
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 111-07: Boîtiers étanches pour la catégorie A – Aériens
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-1023-3
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61753-111-07:2021
– 2 – IEC 61753-111-07:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Abbreviated terms . 11
5 General requirements . 11
5.1 Storage, transportation and packaging . 11
5.2 Installation and intervention . 11
5.3 Marking and identification . 12
5.4 Materials . 12
5.5 Safety . 12
6 Test . 13
6.1 General . 13
6.2 Test sample preparation . 13
6.3 Test and measurement methods . 13
6.4 Sample size . 13
6.5 Pass/fail criteria . 14
6.6 Test report . 14
7 Performance requirements. 14
7.1 Sealing, optical and visual examination pass/fail criteria . 14
7.2 Sealing performance requirements . 16
7.3 Optical performance requirements . 18
Annex A (normative) Sample definition . 21
A.1 Fibre type for test sample . 21
A.2 Closure optical test sample configuration . 22
Annex B (normative) Intervention and reconfiguration/resplicing . 25
B.1 Handling of the closure . 25
B.2 Movements of splice trays to gain access to the actual fibre circuits . 25
B.3 Addition and connection of drop cables . 25
B.4 Rearranging splices . 25
B.5 Rearranging optical connector sets, patchcords or pigtails (when applicable) . 26
B.6 Addition and connection of extra FMS elements . 26
B.7 Handling of the closure . 26
Bibliography . 27
Figure A.1 – Track/spur joint configuration sample . 22
Figure A.2 – Optical circuits in track/spur joint closure . 23
Figure A.3 – Distribution joint configuration sample. 23
Figure A.4 – Optical circuits in the distribution joint closure . 24
Table 1 – Sealing, optical and visual examination pass/fail criteria . 15
Table 2 – Sealing performance requirements . 16
Table 3 – Optical performance requirements . 19
---------------------- Page: 10 ----------------------
SIST EN IEC 61753-111-07:2021
IEC 61753-111-07:2021 © IEC 2021 – 3 –
Table A.1 – Fibre references for IEC 60793-2-50, sub-category B-652.D . 21
Table A.2 – Fibre references for IEC 60793-2-50, sub-category B-657.A1. 21
Table A.3 – Fibre references for IEC 60793-2-50, sub-category B-657.A2. 22
---------------------- Page: 11 ----------------------
SIST EN IEC 61753-111-07:2021
– 4 – IEC 61753-111-07:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 111-07: Sealed closures – Category A – Aerial
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61753-111-07 has been prepared by subcommittee 86B: Fibre optic interconnecting
devices and passive components, of IEC technical committee 86: Fibre optics. It is an
International Standard.
This first edition cancels and replaces IEC 61753-111-7 published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to
IEC 61753-111-7:
a) terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019;
b) detailed test severities added for UV light and fungus resistance tests of materials;
c) test severities updated according to IEC 61753-1:2018;
d) test overpressure for sealing tests changed to 20 kPa;
e) pass-fail criterion of pressure loss during test added to mechanical sealing tests;
---------------------- Page: 12 ----------------------
SIST EN IEC 61753-111-07:2021
IEC 61753-111-07:2021 © IEC 2021 – 5 –
f) laboratory test conditions harmonized with IEC 61300-1 to +23 °C ± 5 °C, unless otherwise
specified;
g) addition of B-657 fibre types with minimum bending radius of stored fibres according to
IEC 61756-1:2019;
h) vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles;
i) reduced loads added in cable retention test for small diameter cables and tubes;
j) reduced loads for cable axial compression test for small diameter cables and tubes;
k) duration of the cycles in torsion and bending test added;
l) free fall test removed (is covered now by the optical shock test);
m) duration of the assembly and disassembly test reduced to 5 cycles;
n) duration of the change of temperature reduced to 12 cycles.
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4493/FDIS 86B/4512/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts of IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on the
IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
---------------------- Page: 13 ----------------------
SIST EN IEC 61753-111-07:2021
– 6 – IEC 61753-111-07:2021 © IEC 2021
INTRODUCTION
Performance standards for sealed closures define the requirements for standard optical
performance under a set of specified conditions. This subpart of the IEC 61753-111 series
contains a series or a set of tests and measurements with clearly stated conditions, severities
and pass/fail criteria. The set of tests is intended to be a basis to prove the product’s ability to
satisfy the requirements of a specific application, market sector or user group.
A product that has been shown to meet all the requirements of this performance standard may
be declared as complying with this performance standard. Products having the same
classification from one manufacturer that satisfy this performance standard will operate within
the boundaries set by the performance standard. There is no guarantee that products from
different manufacturers, having the same classification and which conform to the same
performance standard, will provide an equivalent level of performance when they are used
together.
Conformance with IEC environmental policy according to IEC Guide 109 and concerning the
need to reduce the impacts on the natural environment of fibre optic closures during all phases
of their life – from acquiring materials to manufacturing, distribution, use, and end-of-life
treatment (i.e. re-use, recycling – recovery and disposal) – is not part of this document, but will
be covered in the generic specification.
Conformance to a performance standard demonstrates that a product has passed a design
verification test. It is not a guarantee of lifetime assured performance or reliability. Reliability
testing is the subject of a separate test schedule, where the tests and severities selected are
such that they are truly representative of the requirements of this reliability test programme.
Consistency of manufacture should be maintained using a recognised quality assurance
programme whilst the reliability of product should be evaluated using the procedures
recommended in IEC 62005 (all parts).
---------------------- Page: 14 ----------------------
SIST EN IEC 61753-111-07:2021
IEC 61753-111-07:2021 © IEC 2021 – 7 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 111-07: Sealed closures – Category A – Aerial
1 Scope
This part of IEC 61753 contains the minimum tests, test severities and measurement
requirements which a sealed fibre optic closure need to meet in order to be categorised as
meeting the IEC standard for category A – Aerial, as defined in Table A.13 of IEC 61753-1:2018.
Free breathing closures are not covered in this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60068-2-10, Environmental testing – Part 2-10: Tests – Test J and guidance: Mould growth
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 1: General and guidance
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre or cable retention
IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-5: Tests – Torsion
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-11, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-11: Tests – Axial compression
IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-12: Tests – Impact
IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-22: Tests – Change of temperature
IEC 61300-2-26, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-26: Tests – Salt mist
---------------------- Page: 15 ----------------------
SIST EN IEC 61753-111-07:2021
– 8 – IEC 61753-111-07:2021 © IEC 2021
IEC 61300-2-33, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-33: Tests – Assembly and disassembly of fibre optic
mechanical splices, fibre management systems and closures
IEC 61300-2-34, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-34: Tests – Resistance to solvents and contaminating fluids
of interconnecting components and closures
IEC 61300-2-37, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-37: Tests – Cable bending for fibre optic closures
IEC 61300-2-38, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-38: Tests – Sealing for pressurized fibre optic closures
IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-1: Examinations and measurements – Visual examination
IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
changes in attenuation and return loss
IEC 61300-3-28, Fibre optic interconnecting
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.