iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13090:2002

(Main)

Means for resealing threaded joints of gas pipework in buildings

Means for resealing threaded joints of gas pipework in buildings

This European Standard specifies the properties and the test methods of sealants used to reseal threaded joints of metallic gas pipework in buildings operated at a maximum allowed operating pressure of 100 mbar (such sealants hereafter are referred to as "sealants").   Note Gas pipework in buildings is in accord ance with EN 1775 the pipework between the point  of delivery and the inlet connection to the gas appliance.

Mittel zum nachträglichen Abdichten von Gewindeverbindungen in Gas-Leitungsinstallationen in Gebäuden

Diese Europäische Norm legt die Eigenschaften und Prüfverfahren von Mitteln fest, die zum nachträglichen Abdichten von Verbindungen in Gas-Leitungsinstallationen in Gebäuden mit einem maximalen Betriebsdruck von 100mbar dienen (derartige Dichtmittel werden im folgenden als "Dichtmittel" bezeichnet).  Anmerkung: Gas-Leitungsinstallationen in Gebäuden sind in Übereinstimmung mit prEN1775 die Leitungsinstallationen zwischen der Gas-Übergabestelle und der Geräteeingangsverbindung.

Matériaux pour la réétanchéité des raccords filetés des tuyauteries de gaz dans les bâtiments

La présente norme européenne spécifie les propriétés et méthodes d'essai des produits d'étanchéité utilisés pour refaire l'étanchéité des raccords filetés des tuyauteries métallique de gaz dans les bâtiments soumis a une pression de service maximale admise de 100 mbar (ces produits d'étanchéité sont désignés ci-apressous le terme de "produits d'étanchéité").   Note: Conformément a l'EN 1775, unetuyauterie de gaz dans les bâtiments est une tuyauterie reliant le point de livraison et le raccord d'arrivée de l'appareil a gaz.

Sredstva za pretesnitev navojnih spojev pri plinski napeljavi v stavbah

General Information

Status
Published
Publication Date
31-Mar-2002
ICS
91.140.40 - Gas supply systems
Technical Committee
PLN - Gas appliances for domestic use
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2002
Due Date
01-Apr-2002
Completion Date
01-Apr-2002
Ref Project
EN 13090:2000 - Means for resealing threaded joints of gas pipework in buildings

Buy Standard

EN 13090:2002EN 13090:2002
PreviousNext
Standard
EN 13090:2002
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sredstva za pretesnitev navojnih spojev pri plinski napeljavi v stavbahMittel zum nachträglichen Abdichten von Gewindeverbindungen in Gas-Leitungsinstallationen in GebäudenMatériaux pour la réétanchéité des raccords filetés des tuyauteries de gaz dans les bâtimentsMeans for resealing threaded joints of gas pipework in buildings91.140.40Sistemi za osk
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16830:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
EN 16830:2022

This European Standard specifies the safety, design, construction and performance requirements for Temperature Control Function (TCF) and Combustion Product Discharge Safety Device (TTB) intended for use with burners and appliances using gaseous or liquid fuels.
It also describes the test procedures for checking compliance with these requirements.
This European Standard is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks, see Annex I).
This European Standard is applicable to electronically based TTB and TCF only.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14459:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
EN 14459:2021

This European Standard specifies methods for the classification and assessment of function blocks designed to operate burners and appliances burning gaseous or liquid fuels with particular regards to their fault behaviour and preventative measures.
This European Standard is applicable to new control function blocks, not covered by dedicated control standards.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 437:2021(Main)
Test gases - Test pressures - Appliance categories
EN 437:2021

This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families. It serves as a reference document in the specific standards for appliances that fall within the scope of the Council Directive on the approximation of the laws of Member States concerning gas appliances 2009/142/EC.
The standard makes recommendations for the use of the gases and pressures to be applied for the tests. The full procedure will be given in the corresponding appliance standards.
NOTE   The test gases and the test pressures specified in this standard are in principle intended to be used with all the appliances in order to establish conformity with the corresponding standards.
However, the use of some test gases and test pressures may not be appropriate in the following cases:
-   appliances with nominal heat input greater than 300 kW;
-   appliances constructed on site;
-   appliances in which the final design is influenced by the user;
-   appliances constructed for use with high supply pressures (notably direct use of the saturated vapour pressure).
In these cases, the specific appliance standards may specify other test conditions in order to establish compliance with their requirements.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN Guide 18:2021(Main)
Gas Appliances and Fittings - Guidelines for the implementation of Essential Requirements of Gas Appliances Regulation 2016/426/EU in European standards
CEN Guide 18:2021

This document presents guidelines for the implementation of Essential Requirements of Gas Appliances Regulation (EU) 2016/426 into hEN candidates for citation in the OJEU.
This document gives guidance that is additional to the CEN/CENELEC Internal Regulations, Part 3:2019, when this is necessary owing to the special requirements of gas appliances and fittings.
This document is intended for the drafting of gas appliances and fittings standards.

  • Guide
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1749:2020(Main)
Classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
EN 1749:2020

This European Standard gives details for the classification of gas  appliances according to the method of supplying combustion air  and of evacuating the products of combustion. […]  This European Standard is a guide for the harmonization of  products standards, for the preparation of installation standards  and for the common understanding of the types of gas Appliances.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14291:2005(Main)
Foam producing solutions for leak detection on gas installations
EN 14291:2004

This document specifies requirements and test methods of foam producing solutions for leak detection (hereafter called leak detection solution) used for leak detection of combustible gases of the 1st family (town gas), 2nd family (natural gas), and 3rd family (liquefied petroleum gases (LPG)) (see EN 437) within the temperature range of -15 °C or 0 °C to 50 °C. It is applicable for leak detection solutions, which are delivered as ready to use solutions, e.g. in spray cans.
Note   The leak detection solution covered by this document may also be used for other compressed gases. In this case the producer has to be consulted.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-1:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
EN 751-1:1996

This European Standard specifies requirements and test methods for anaerobic jointing compounds (hereafter referred to as "jointing compounds") suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems.  [The scope of the complete standard includes a table.]

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 751-2:1997(Main)
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 751-2:1996

This European Standard specifies requirements and test methods for non-hardening sealing materials (hereafter referred to as jointing compounds) suitable for sealing threaded metallic joints such as those specified in ISO 7-1. These jointing compounds are for use in contact with 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG) not including LPG in the liquid form) and hot water of heating systems (Class A), in gas appliances and their auxiliary equipment (Class B) as well as in LPG storage (Class C) according to table 1.  Anaerobic jointing compounds are covered by EN 751-1, non-hardening sealing materials in the form of PTFE-tapes are covered by EN 751-3.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 437:2005/kprA1:2008(Amendment)
Test gases - Test pressures - Appliance categories - Amendment A1
EN 437:2003/prA1

This standard specifies the test gases, test pressures and categories of appliances relative to use of combustible gases of the first, second and third families. It serves as a reference document in the specific standards for appliances that fall within the scope of the Council Directive on the approximation of the laws of Member States concerning gas appliances.
The standard makes recommendations for the use of the gases and pressures to be applied for the tests. The full procedure will be given the corresponding appliance standards.
NOTE The test gases and the test pressures specified in this standard are in principle intended to be used with all the appliances in order to establish conformity with the corresponding standards.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1594:2024(Main)
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 1594:2024

This EU standard is applicable for transporting gas via onshore high pressure steel pipeline infrastructures where:
-   onshore: from the point where the pipeline first crosses what is normally accepted as battery limit between onshore and offshore and not located within commercial or industrial premises as an integral part of the industrial process on these premises except for any pipelines and facilities supplying such premises. This European Standard also applies to a pipeline system with a starting point onshore, also when parts of the pipeline system on the mainland subsequently cross fjords, lakes etc.
-   high pressure: gas with a maximum operating pressure over 16 bar and a design temperature between −40 °C and 120 °C
-   steel pipeline infrastructure: a steel pipeline infrastructure consists of pipeline components such as pipes, valves, couplings and other equipment. Pipeline components in scope are restricted to components made of unalloyed or low alloyed carbon steel and joined by welds, flanges or mechanical couplings.
-   gas: non-toxic and non-corrosive natural gas, biomethane gas, hydrogen gas and mixtures of these gasses where technical evaluation has ensured that operating conditions or constituents or properties of the gas do not affect the safe operation of the pipeline.
Gas infrastructures covered by this European Standard begin after the gas producer's metering station. The functional demarcation of the pipeline system within a plant area will be determined from case to case. Generally speaking, this will be directly after the first isolating valve of the metering installation.
This European Standard also describes the mechanical requirements for pipework in stations with a maximum operating pressure greater than 16 bar.
Welding requirements are described in EN 12732. Functional requirements for stations are given in EN 1776, EN 1918-5, EN 12186, and EN 12583. Requirements for safety management and pipeline integrity management are given in EN 17649.
This European Standard specifies common basic principles for gas infrastructures. Users of this European Standard should be aware that there may exist more detailed national standards and codes of practice in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above mentioned principles.
This European Standard does not apply to existing pipelines, in use prior to the publication of this European Standard, nor to modifications to existing pipelines, except for the adaptation of the pipelines for the use of hydrogen and admixtures with hydrogen.
In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
Reference is made in this European Standard to relevant European and other recognised standards for products used to construct and operate gas infrastructures.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day