Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

This standard specifies the requirements relating to:
Steel FE-PM2701 (X2NiCoMo18-8-5)
Vacuum induction melted and vacuum arc remelted
Solution treated and precipitation treated
Plate
6 mm ≤ a ≤ 40 mm
1 750 MPa ≤ Rm ≤ 2 000 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM2701 (X2NiCoMo18-8-5) - Vakuuminduktionserschmolzen und vakuumlichtbogenumgeschmolzen - Lösungsgeglüht und ausgehärtet - Platten - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

Diese Norm legt die Anforderungen an
Stahl FE PM2701 (X2NiCoMo18-8-5)
Vakuuminduktionserschmolzen und
vakuumlichtbogenumgeschmolzen
Lösungsgeglüht und ausgehärtet
Platten
6 mm < a ≤ 40 mm
1 750 MPa ≤ Rm ≤ 2 000 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM2701 (X2NiCoMo18-8-5) - Élaboré sous vide et refondu par arc sous vide - Mis en solution et vieilli - Plaques - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

Aeronavtika - Jeklo FE-PM2701 (X2NiCoMo18-8-5) - Taljeno z vakuumsko indukcijo in vakuumsko obločno pretaljeno - Žarjeno v topilu in utrjeno - Plošča - 6 mm < a ≤ 40 mm - 1750 MPa ≤ Rm ≤ 2000 MPa

General Information

Status
Published
Publication Date
06-Apr-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Apr-2009
Due Date
08-Jun-2009
Completion Date
07-Apr-2009

Buy Standard

Standard
EN 3532:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.|VXQJVJHJOKW49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3532:2007SIST EN 3532:2009en,de01-maj-2009SIST EN 3532:2009SLOVENSKI
STANDARD



SIST EN 3532:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3532
March 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
Série aérospatiale - Acier FE-PM2701 (X2NiCoMo18-8-5) -Élaboré sous vide et refondu par arc sous vide - Mis en solution et vieilli - Plaques - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
Luft- und Raumfahrt - Stahl FE-PM2701 (X2NiCoMo18-8-5) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode im Vakuum umgeschmolzen - Lösungsgeglüht und ausgelagert - Platten - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa This European Standard was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3532:2007: ESIST EN 3532:2009



EN 3532:2007 (E) 2 Foreword This document (EN 3532:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3532
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.