SIST EN 60811-607:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene

This Part 607 of IEC 60811 specifies test methods for carbon black dispersion that are applicable specifically to PE and PP compounds, including cellular compounds and foam skin for insulation.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 607: Physikalische Prüfungen - Prüfung für die Bewertung der Russverteilung in Polyethylen und in Polypropylen

Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 607: Essais physiques - Essai pour l'évaluation de la dispersion du noir de carbone dans le polyéthylène et le polypropylène

La CEI 60811-607:2012 précise les méthodes d'essai à employer pour déterminer la dispersion du noir de carbone, spécifiquement applicables aux mélanges PE et PP, y compris les mélanges d'isolation cellulaire avec ou sans peau. La CEI 60811-607:2012 annule et remplace l'Article 13 de la CEI 60811-4-1:2004, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012.   Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 607. del: Fizični preskusi - Preskus za ocenitev disperzije saj v polietilenu in polipropilenu

607. del standarda IEC 60811 določa preskusne metode za disperzije saj, ki veljajo za polietilenske in polipropilenske zmesi, vključno s celičnimi zmesmi in penastim plaščem za izolacijo.

General Information

• Status: Published
• Publication Date: 08-Jul-2012
• ICS: 29.035.20 - Plastics and rubber insulating materials
• ICS: 29.060.20 - Cables
• Technical Committee: IEKA - Electric cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Jun-2012
• Due Date: 24-Aug-2012
• Completion Date: 09-Jul-2012
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60811-607:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene

Relations

• Replaces: SIST EN 60811-4-1:2005 - Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
• Effective Date: 29-Jan-2023
• Revised: SIST EN 60811-4-1:2005 - Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
• Effective Date: 23-Jul-2014
• Revised: SIST EN 60811-4-1:2005 - Insulating and sheathing materials of electric and optical cables - Common test methods -- Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60811-607:2012
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO)L]LþQLSUHVNXVL3UHVNXV]DRFHQLWHYGLVSHU]LMHVDMYSROLHWLOHQXLQ
SROLSURSLOHQX
Electric and optical fibre cables - Test methods for non-metallic materials - Part 607:
Physical tests - Test for the assessment of carbon black dispersion in polyethylene and
polypropylene
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 607: Physikalische Prüfungen - Prüfung für die Bewertung der
Russverteilung in Polyethylen und in Polypropylen
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 607: Essais physiques - Essai pour l'évaluation de la dispersion du
noir de carbone dans le polyéthylène et le polypropylène
Ta slovenski standard je istoveten z: EN 60811-607:2012
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
29.060.20 Kabli Cables
SIST EN 60811-607:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60811-607:2012

---------------------- Page: 2 ----------------------

SIST EN 60811-607:2012

EUROPEAN STANDARD
EN 60811-607

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 29.035.01; 29.060.20 Supersedes EN 60811-4-1:2004 (partially)


English version


Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 607: Physical tests -
Test for the assessment of carbon black dispersion in polyethylene and
polypropylene
(IEC 60811-607:2012)


Câbles électriques et à fibres optiques -  Kabel, isolierte Leitungen und
Méthodes d'essai pour les matériaux non- Glasfaserkabel -
métalliques - Prüfverfahren für nichtmetallene
Partie 607: Essais physiques - Werkstoffe -
Essai pour l'évaluation de la dispersion du Teil 607: Physikalische Prüfungen -
noir de carbone dans le polyéthylène et le Prüfung für die Bewertung der
polypropylène Russverteilung in Polyethylen und in
(CEI 60811-607:2012) Polypropylen
(IEC 60811-607:2012)


This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-607:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60811-607:2012
EN 60811-607:2012 - 2 -

Foreword
The text of document 20/1316/FDIS, future edition 1 of IEC 60811-607, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60811-607:2012.

The following dates are fixed:
(dop) 2013-01-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-04-17

standards conflicting with the
document have to be withdrawn

This document supersedes Clause 13 of EN 60811-4-1:2004 (partially). Full details of the replacements are
shown in Annex A of EN 60811-100:2012.
There are no technical changes with respect to EN 60811-4-1:2004, but see the Foreword to EN 60811-
100:2012.
This standard is to be read in conjunction with EN 60811-100.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC)
Endorsement notice
The text of the International Standard IEC 60811-607:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60811-607:2012
- 3 - EN 60811-607:2012

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60811-100 2012 Electric and optical fibre cables - Test EN 60811-100 2012
methods for non-metallic materials -
Part 100: General


ISO 18553 2002 Method for the assessment of the degree of - -
pigment or carbon black dispersion in
polyolefin pipes, fittings and compounds

---------------------- Page: 5 ----------------------

SIST EN 60811-607:2012

---------------------- Page: 6 ----------------------

SIST EN 60811-607:2012



IEC 60811-607

®

Edition 1.0 2012-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Electric and optical fibre cables – Test methods for non-metallic materials –

Part 607: Physical tests – Test for the assessment of carbon black dispersion

in polyethylene and polypropylene




Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –


Partie 607: Essais physiques – Essai pour l’évaluation de la dispersion du noir

de carbone dans le polyéthylène et le polypropylène












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

H
CODE PRIX


ICS 29.035.01; 29.060.20 ISBN 978-2-8322-0039-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60811-607:2012
– 2 – 60811-607  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Procedure . 6
4.3 Expression of results . 7
4.4 Requirements . 7
5 Test report. 7
Bibliography . 8

---------------------- Page: 8 ----------------------

SIST EN 60811-607:2012
60811-607  IEC:2012 – 3 –
INTERNATIONAL E
...