Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube

This EN describes a method for determining the shock-wave velocity of the shock tube of a non-electric detonator. NOTE This determination can be carried out at the same time as the determination of the delay accuracy, as described in prEN (WI 321037).

Explosivestoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 23: Bestimmung der Stoßwellengeschwindigkeit in Zündschläuchen

Diese europäische Norm beschreibt ein Verfahren zur Bestimmung der Stoßwellengeschwindigkeit der Zündschläuchen von nicht-elektrischen Zündern. ANMERKUNG Diese Bestimmung kann zusammen mit der Bestimmung der Genauigkeit der Verzögerung, die in prEN ... Teil 16 (WI 0321037) beschrieben ist, ausgeführt werden.

Explosifs a usage civil - Détonateurs et relais - Partie 23: Détermination de la vitesse d'ondes de choc du tube conducteur d'ondes de choc

La présente Norme européenne spécifie une méthode de détermination de la vitesse d'onde de choc des tubes a transmission d'ondes de choc utilisés avec les détonateurs non-électriques.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 23. del: Ugotavljanje hitrosti udarnega vala detonacijskih cevk

General Information

Status
Published
Publication Date
30-Nov-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2002
Due Date
01-Dec-2002
Completion Date
01-Dec-2002

Relations

Buy Standard

Standard
EN 13763-23:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 23. del: Ugotavljanje hitrosti udarnega vala detonacijskih cevkExplosivestoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 23: Bestimmung der Stoßwellengeschwindigkeit in ZündschläuchenExplosifs a usage civil - Détonateurs et relais - Partie 23: Détermination de la vitesse d'ondes de choc du tube conducteur d'ondes de chocExplosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-23:2002SIST EN 13763-23:2002en01-december-2002SIST EN 13763-23:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-23September 2002ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 23:Determination of the shock-wave velocity of shock tubeExplosifs à usage civil - Détonateurs et relais - Partie 23:Détermination de la vitesse d'ondes de choc du tubeconducteur d'ondes de chocExplosivestoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 23: Bestimmung derStoßwellengeschwindigkeit in ZündschläuchenThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-23:2002 E



EN 13763-23:2002 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Apparatus.55Test pieces.56Procedure.57Test report.6Annex A (informative)
Range of applicability ot the test method.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.8



EN 13763-23:2002 (E)3ForewordThis document (EN 13763-23:2002) has been prepared by the Technical Committee CEN/TC 321 “Explosives forcivil uses”, the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of the EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards with the generic title Explosives for civil uses - Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1Part 1: Requirements.EN 13763-2Part 2: Determination of thermal stability.EN 13763-3Part 3: Determination of sensitiveness to impact.prEN 13763-4Part 4: Determination of resistance to abrasion of leading wires and shock tubes.prEN 13763-5Part 5: Determination of resistance to cutting damage of leading wires and shock tubes.prEN 13763-6Part 6: Determination of resistance to cracking in low temperatures of leading wires.prEN 13763-7Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections,crimps and closures.prEN 13763-8Part 8: Determination of resistance to vibration of plain detonators.prEN 13763-9Part 9: Determination of resistance to bending of detonators.prEN 13763-10Part 10: Determination of resistanc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.