Children's high chairs - Part 1: Safety requirements

2009-12-14 EMA: Tolerance of 9 months before ENQ requested through resolution 1/2009 taken on 2009-11-13.

Kinderhochstühle - Teil 1: Sicherheitstechnische Anforderungen

Chaises hautes pour enfants - Partie 1: Exigences de sécurité

Otroški visoki stoli - 1. del: Varnostne zahteve - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
19-Mar-2011
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
20-Sep-2017
Due Date
25-Sep-2017
Completion Date
20-Sep-2017

Relations

Buy Standard

Draft
EN 14988-1:2006/oprA1:2011
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14988-1:2006/oprA1:2011
01-februar-2011
Otroški visoki stoli - 1. del: Varnostne zahteve - Dopolnilo A1
Children's high chairs - Part 1: Safety requirements
Kinderhochstühle - Teil 1: Sicherheitstechnische Anforderungen
Chaises hautes pour enfants - Partie 1: Exigences de sécurité
Ta slovenski standard je istoveten z: EN 14988-1:2006/prA1
ICS:
97.140 Pohištvo Furniture
SIST EN 14988-1:2006/oprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14988-1:2006/oprA1:2011

---------------------- Page: 2 ----------------------

SIST EN 14988-1:2006/oprA1:2011


EUROPEAN STANDARD
DRAFT
EN 14988-1:2006
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
December 2010
ICS 97.140; 97.190
English Version
Children's high chairs - Part 1: Safety requirements
Chaises hautes pour enfants - Partie 1: Exigences de Kinderhochstühle - Teil 1: Sicherheitstechnische
sécurité Anforderungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 364.

This draft amendment A1, if approved, will modify the European Standard EN 14988-1:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14988-1:2006/prA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14988-1:2006/oprA1:2011
EN 14988-1:2006/prA1:2010 (E)
Contents Page
Foreword .3
1 Modification to Clause 2, Normative references .3
2 Modification to Clause 3, Terms and definitions .3
3 Modification to Clause 5, Construction .4
5.6.3 Requirements for high chairs with passive restraint system .5
5.7 Lateral protection.6
5.7.1 General .6
5.7.2 Lateral protection height .6
5.7.3 Lateral protection length for high chairs fitted with active restraint system .6
5.7.4 Lateral protection length for high chairs with passive restraint system .6

2

---------------------- Page: 4 ----------------------

SIST EN 14988-1:2006/oprA1:2011
EN 14988-1:2006/prA1:2010 (E)
Foreword
This document (EN 14988-1:2006/prA1:2010) has been prepared by Technical Committee CEN/TC 364
“Project Committee - High Chairs”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
1 Modification to Clause 2, Normative references
Add the following references:
EN 13210:2004 Child use and care articles- Children's harnesses, reins and similar type articles- Safety
requirements and test methods
EN 14988-2/prA1:2010 Children's high chairs – Part 2: Test methods
2 Modification to Clause 3, Terms and definitions
Replace the definitions of 3.3 and 3.4 with the following:
3.3
integral harness
an assembly intended to retain the child in the high chair comprising either a crotch restraint, waist strap and
shoulder straps, or comprising straps that pass over the child's shoulders and between the child's legs.
3.4
waist belt
a strap, which when fastened, fully surrounds the child's waist.
Add a new 3.5 as follows:
3.5
waist strap
a strap, which when fastened, goes from one side of the child to the other passing in front of the child’s waist
Replace the numbering of the subsequent terms as follows:
"3.5 opening" becomes "3.6 opening"
"3.6 shear and squeeze points" becomes "3.7 shear and squeeze points"
"3.7 locking device" becomes "3.8 locking device"
"3.8 locking mechanism" becomes "3.9 locking mechanism"
Add new term 3.10 as follows:
3.10
junction line
the intersection of the seat and the backrest (see Figure 1).
3

---------------------- Page: 5 ----------------------

SIST EN 14988-1:2006/oprA1:2011
EN 14988-1:2006/prA1:2010 (E)
Note The method to determine the junction line can be found in cl. 4.2 of EN 14988-2/prA1:2010

Figure 1 - Junction line

3 Modification to Clause 5, Construction
Replace title and body of 5.4.3 as follows:
5.4.3 Unintentional folding of the high chair
Unintentional folding of the high chair shall be avoided.
This requirement is fulfilled if:
a) at least one
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.