SIST EN IEC 61987-32:2024
(Main)Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange
IEC 61987-32:2024 This part of IEC 61987 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for I/O modules and a device list of properties (DLOP) for the description of a range of I/O module types.
The structures of the OLOP and the DLOPs correspond to the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.
Aspects other than the OLOP, needed in different electronic data exchange processes and described in IEC 61987-10 and IEC 61987-11, are published in IEC 61987-92.
The locations of the libraries of properties and of blocks used in the LOPs concerned are listed in Annex C and Annex D.
Industrielle Automatisierungs- und Leittechnik – Datenstrukturen und -elemente in Katalogen der Prozessleittechnik – Teil 32: Eigenschaftslisten (LOP) für E/A-Module für den elektronischen Datenaustausch
Mesure et commande des processus industriels - Structures de données et éléments dans les catalogues d’équipement de processus - Partie 32: Listes des propriétés (LOP) pour les modules d'E/S pour l'échange électronique des données
IEC 61987-32:2024 Cette partie de l'IEC 61987 fournit une liste des propriétés fonctionnelles (OLOP) pour la description des paramètres fonctionnels et la collecte des exigences pour les modules d'E/S et une liste des propriétés des appareils (DLOP) pour la description d'une gamme de types de modules d'E/S.
Les structures de l'OLOP et des DLOP correspondent aux structures générales définies dans l'IEC 61987-11 et conviennent aux principes essentiels de construction des LOP définis dans l'IEC 61987-10.
Des aspects autres que l'OLOP, nécessaires dans différents processus d'échange électronique des données et décrits dans l'IEC 61987-10 et l'IEC 61987-11, sont publiés dans l'IEC 61987-92.
Les emplacements des bibliothèques de propriétés et des blocs utilisés dans les LOP concernées sont répertoriés dans l’Annexe C et l’Annexe D.
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 32. del: Seznam lastnosti za module I/O za elektronsko izmenjavo podatkov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 32. del: Seznam lastnosti za module I/O za
elektronsko izmenjavo podatkov
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic
data exchange
Industrielle Automatisierungs- und Leittechnik – Datenstrukturen und -elemente in
Katalogen der Prozessleittechnik – Teil 32: Eigenschaftslisten (LOP) für E/A-Module für
den elektronischen Datenaustausch
Mesure et commande des processus industriels - Structures de données et éléments
dans les catalogues d’équipement de processus - Partie 32: Listes des propriétés (LOP)
pour les modules d'E/S pour l'échange électronique des données
Ta slovenski standard je istoveten z: EN IEC 61987-32:2024
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61987-32
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2024
ICS 25.040.40
English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 32: Lists of
properties (LOP) for I/O modules for electronic data exchange
(IEC 61987-32:2024)
Mesure et commande des processus industriels - Industrielle Automatisierungs- und Leittechnik -
Structures de données et éléments dans les catalogues Datenstrukturen und -elemente in Katalogen der
d'équipement de processus - Partie 32: Listes des Prozessleittechnik - Teil 32: Eigenschaftslisten (LOP) für
propriétés (LOP) pour les modules d'E/S pour l'échange E/A-Module für den elektronischen Datenaustausch
électronique des données (IEC 61987-32:2024)
(IEC 61987-32:2024)
This European Standard was approved by CENELEC on 2024-07-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61987-32:2024 E
European foreword
The text of document 65E/934/CDV, future edition 1 of IEC 61987-32, prepared by SC 65E "Devices
and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-12
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61987-32:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60079-0 NOTE Approved as EN IEC 60079-0
IEC 60947-5-6:1999 NOTE Approved as EN 60947-5-6:2000 (not modified)
IEC 61298-1:2008 NOTE Approved as EN 61298-1:2008 (not modified)
IEC 61298-2:2008 NOTE Approved as EN 61298-2:2008 (not modified)
IEC 61298-3:2008 NOTE Approved as EN 61298-3:2008 (not modified)
IEC 61360 series NOTE Approved as EN 61360 series
IEC 61360-1 NOTE Approved as EN 61360-1
IEC 61360-2 NOTE Approved as EN 61360-2
IEC 61784-1 series NOTE Approved as EN IEC 61784-1 series
IEC 61987 series NOTE Approved as EN IEC 61987 series
IEC 61987-1 NOTE Approved as EN 61987-1
IEC 61987-31:2022 NOTE Approved as EN IEC 61987-31:2023 (not modified)
IEC 61987-92 NOTE Approved as EN IEC 61987-92
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues - Part 10:
List of Properties (LOPs) for Industrial-
Process Measurement and Control for
Electronic Data Exchange - Fundamentals
- — + AC 2011
IEC 61987-11 — Industrial-process measurement and EN 61987-11 —
control - Data structures and elements in
process equipment catalogues - Part 11:
List of properties (LOPs) of measuring
equipment for electronic data exchange -
Generic structures
IEC 61987-32 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial- process measurement and control – Data structures and elements in
process equipment catalogues –
Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange
Mesure et commande des processus industriels – Structures de données et
éléments dans les catalogues d’équipement de processus –
Partie 32: Listes des propriétés (LOP) pour les modules d'E/S pour l'échange
électronique des données
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40 ISBN 978-2-8322-8935-8
– 2 – IEC 61987-32:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General . 7
4.1 Overview. 7
4.2 Examples of DLOP block usage . 7
4.2.1 DLOP for I/O modules . 7
Annex A (normative) Operating list of properties for I/O modules . 10
Annex B (normative) Device lists of properties for I/O modules . 11
B.1 I/O module . 11
Annex C (normative) Property library . 12
Annex D (normative) Block library for considered device types . 13
Bibliography . 14
Figure 1 – Four-channel binary input module . 9
Table 1 – DLOP Example of I/O module with binary inputs . 7
IEC 61987-32:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
DATA STRUCTURES AND ELEMENTS
IN PROCESS EQUIPMENT CATALOGUES –
Part 32: Lists of properties (LOP) for I/O modules
for electronic data exchange
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 61987-32 has been prepared by subcommittee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.