SIST EN 3294:2008

Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C

This standard specifies the dimensions of uncoated T-head bolts, close tolerance, with MJ-thread, thread length for increased height nuts, in heat resistant nickel base alloy NI-P101HT for aerospace applications.
Maximum test temperature of the parts is 730 °C.
These bolts are to be used in aerospace fastening systems mainly stressed in shearing force.

Luft- und Raumfahrt - T-Kopf-Passschrauben, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), blank für hohe Muttern - Klasse: 1 210 MPa/730 °C

Diese Norm legt die Maße von blanken T Kopf Passschrauben mit MJ Gewinde, Gewindelänge für hohe Muttern, aus hochwarmfester Nickelbasislegierung NI P101HT für die Verwendung in der Luft- und Raumfahrt fest.
Die maximale Prüftemperatur der Teile beträgt 730 °C.
Diese Schrauben sind in Verbindungssystemen der Luft- und Raumfahrt zu verwenden, die hauptsächlich auf Scherkraft beansprucht werden.

Série aérospatiale - Vis de précision à tête anti-rotation T en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), non revêtu pour écrou renforcé - Classification: 1 210 MPa/730 °C

Aeronavtika - Sorniki, glava T, ozka toleranca, iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (Waspaloy), brez prevleke, za visoke matice - Klasifikacija: 1 210 MPa/730 °C

General Information

• Status: Published
• Publication Date: 05-May-2008
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Apr-2008
• Due Date: 19-Jun-2008
• Completion Date: 06-May-2008
• Ref Project: EN 3294:2008 - Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °CAeronavtika - Sorniki, glava T, ozka toleranca, iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (Waspaloy), brez prevleke, za visoke matice - Klasifikacija: 1 210 MPa/730 °CSérie aérospatiale - Vis de précision à tête anti-rotation T en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), non revêtu pour écrou renforcé - Classification: 1 210 MPa/730 °CLuft- und Raumfahrt - T-Kopf-Passschrauben, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), blank für hohe Muttern - Klasse: 1 210 MPa/730 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:SIST EN 3294:2008enTa slovenski standard je istoveten z:EN 3294:200801-julij-2008SIST EN 3294:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3294
April 2008 ICS 49.030.20 English Version
Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C
Série aérospatiale - Vis de précision à tête anti-rotation T en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), non revêtu pour écrou renforcé - Classification: 1 210 MPa/730 °C
Luft- und Raumfahrt - T-Kopf-Passschrauben, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), blank für hohe Muttern - Klasse: 1 210 MPa/730 °C This European Standard was approved by CEN on 3 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3294:2008: E



EN 3294:2008 (E) 2 Contents Page 1 Scope.4 2 Normative references.4 3 Required characteristics.4 3.1 Configuration, dimensions, tolerances, masses.4 3.2 Material.4 3.3 Surface treatment.4 3.4 Thread surface.4 4 Designation.8 5 Marking.8 6 Technical specification.8
Figures Figure 1 — Configuration.5
Tables Table 1 — Dimensions.5 Table 2 — Lengths and masses.6



EN 3294:2008 (E) 3 Foreword This document (EN 3294:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3294:2008 (E) 4 1 Scope This standard specifies the dimensions of uncoated T-head bolts, close tolerance, with MJ-thread, thread length for increased height nuts, in heat resistant nickel base alloy NI-P101HT for aerospace applications. Maximum test temperature of the parts is 730 °C. These bolts are to be used in aerospace fastening systems mainly stressed in shearing force.
2 Normative
...