SIST EN 62375:2006
(Main)Video systems (625/50 progressive) - Video and accompanied data using the vertical blanking interval - Analogue interface
Video systems (625/50 progressive) - Video and accompanied data using the vertical blanking interval - Analogue interface
This International Standard specifies the method of transfer of aspect ratio information code, copy control information code and other codes in the vertical blanking interval of the luminance signal. This International Standard is applicable to the transfer of video related information with the video signal through the baseband analogue signal of 625-line/50-frame progressive scan video system between digital and analogue video equipments.
Videosysteme (625/50 ohne Zeilensprung) - Video und Zusatzdaten in der vertikalen Austastlücke - Analoges Interface
Systèmes vidéo (625/50 progressif) - Données vidéo et associées utilisant l'intervalle de suppression de trame - Interface analogique
specifies the method of transfer of aspect ratio information code, copy control information code and other codes in the vertical blanking interval of the luminance signal. is applicable to the transfer of video related information with the video signal through the baseband analogue signal of 625-line/50-frame progressive scan video system between digital and analogue video equipments.
Video sistemi (625/50 progresivno) – Video in spremljajoči podatki, ki uporabljajo navpični zatemnilni interval – Analogni vmesnik (IEC 62375:2004)
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 62375:2006
STANDARD
januar 2006
Video sistemi (625/50 progresivno) – Video in spremljajoči podatki, ki
uporabljajo navpični zatemnilni interval – Analogni vmesnik (IEC 62375:2004)
(istoveten EN 62375:2004)
Video systems (625/50 progressive) – Video and accompanied data using the
vertical blanking interval – Analogue interface (IEC 62375:2004)
ICS 33.160.40 Referenčna številka
SIST EN 62375:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 62375
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2004
ICS 33.160.40
English version
Video systems (625/50 progressive) –
Video and accompanied data using the vertical blanking interval -
Analogue interface
(IEC 62375:2004)
Systèmes vidéo (625/50 progressif) - Videosysteme (625/50 ohne
Données vidéo et associées utilisant Zeilensprung) –
l'intervalle de suppression de trame - Video und Zusatzdaten in der vertikalen
Interface analogique Austastlücke –
(CEI 62375:2004) Analoges Interface
(IEC 62375:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62375:2004 E
---------------------- Page: 2 ----------------------
EN 62375:2004 - 2 -
Foreword
The text of the International Standard IEC 62375:2004, prepared by IEC TC 100, Audio, video and
multimedia systems and equipment, was submitted to the formal vote and was approved by
CENELEC as EN 62375 on 2004-09-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62375:2004 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62375:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
ITU-R BT.1358 1998 Studio parameters of 625 and 525 line - -
progressive scan television systems
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD 62375
First edition
2004-02
Video systems (625/50 progressive) –
Video and accompanied data using
the vertical blanking interval –
Analogue interface
IEC 2004 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale P
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 5 ----------------------
– 2 – 62375 IEC:2004(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references.5
3 Terms, definitions, symbols and abbreviated terms.5
3.1 Terms and definitions .5
3.2 Symbols and abbreviated terms.5
4 Defined signal.6
5 Construction of identification signal .6
5.1 Position.6
5.2 Clock frequency .6
5.3 Signal amplitude.7
5.4 Modulation coding .7
5.5 Preamble.7
5.6 Data bits.7
6 Information content of data bits .9
6.1 Data group 1, Aspect ratio.9
6.2 Data group 2, Reserved .10
6.3 Data group 3, Subtitles.10
6.4 Data group 4, Surround sound and CGMS-A .11
Annex A (informative) Rules of operation .12
Annex B (informative) Recommendation .13
Annex C (informative) Guideline .14
Bibliography.15
---------------------- Page: 6 ----------------------
62375 IEC:2004(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
VIDEO SYSTEMS (625/50 PROGRESSIVE) –
VIDEO AND ACCOMPANIED DATA USING THE VERTICAL
BLANKING INTERVAL – ANALOGUE INTERFACE
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
with this document may involve the use of patents.
The IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable
and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of
the holder of this patent right is registered with IEC. Information may be obtained from:
Sony Corporation
6-7-35 Kita-shinagawa, Shinagawa-ku, 141-0001 Tokyo, Japan
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. The IEC shall not be held responsible for identifying any or all such patent rights.
---------------------- Page: 7 ----------------------
– 4 – 62375 IEC:2004(E)
International Standard IEC 62375 has been prepared by IEC technical committee 100: Audio,
video and multimedia systems and equipment.
The text of this standard is based on the following documents:
CDV Report on voting
100/689/CDV 100/754/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publica
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.