SIST EN 300 444 V2.4.1:2013

Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP)

The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support of the Generic Access Profile (GAP). The GAP is applicable to all DECT Portable radio Terminations (PT) and Fixed radio Terminations (FT) which under the scope of EN 300 176-2 [10] (i.e. 3,1 kHz telephony teleservice) and specifies the minimum functionality that is supported by all other 3,1 kHz voice profiles. The objective of the present document is to ensure the Air Interface (AI) inter-operability of DECT equipment capable of 3,1 kHz telephony applications, in such a way that any DECT PT conforming to the procedures described in the present document is inter-operable with any DECT FT conforming to the procedures described in the present document. The profile consists of the minimum mandatory requirements that allow a 3,1 kHz teleservice connection to be established, maintained and released between a FT and a PT with the appropriate access rights, irrespective of whether the FP provides residential, business or public access services. In addition, the present document defines the features, services, procedures etc. for both the FT and the PT, which are provision mandatory either in the PT or in the FT, as well as some elements that are provision optional but still process mandatory. Mobility Management (MM) procedures at the DECT AI to support incoming calls and outgoing calls are included. Inter-working between the FT and the attached network is outside the scope of the present document.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Profil generičnega dostopa (GAP)

V tem dokumentu je določen nabor tehničnih zahtev za fiksni in prenosni del (FP in PP) za digitalne izboljšane brezvrvične telekomunikacije (DECT), ki podpirata generični dostopovni profil (GAP). GAP velja za vse prenosne radijske postaje (PT) in fiksne radijske postaje (FT), ki spadajo v okvir standarda EN 300 176-2 [10] (npr. telefonska storitev na frekvenci 3,1 kHz), in določa minimalno funkcionalnost, ki jo podpirajo vsi drugi glasovni profili na frekvenci 3,1 kHZ. Cilj trenutnega dokumenta je zagotoviti inteoperabilnost radijskega vmesnika (AI) za opremo DECT, ki omogoča telefonske storitve na frekvenci 3,1 kHz, in sicer na način, pri katerem so vse DECT PT, ki so skladne s postopki, opisanimi v tem dokumentu, interoperabilne z vsemi DECT FT, ki so skladne s postopki, opisanimi v tem dokumentu. Profil vsebuje minimalne obvezne zahteve za vzpostavitev povezave telefonskih storitev na frekvenci 3,1 kHz, pri čemer se takšne storitve vzpostavijo, vzdržujejo in sprostijo med FT in PT z ustreznimi pravicami za dostop, ne glede na to, ali FP zagotavlja stanovanjske, poslovne ali javne storitve dostopa. Poleg tega so v tem dokumentu določene funkcije, storitve, postopki itd. za FT in PT, pri čemer so ti obvezni za PT ali FT, ter tudi nekatere elemente, ki so obvezni le za postopek. Vključeni so tudi postopki upravljanja mobilnosti (MM) pri DECT AI, ki podpirajo dohodne in odhodne klice. Medsebojno delovanje med FT-jem in priključenim omrežjem je zunaj obsega trenutnega dokumenta.

General Information

• Status: Published
• Public Enquiry End Date: 31-May-2013
• Publication Date: 23-Sep-2013
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Jul-2013
• Due Date: 03-Oct-2013
• Completion Date: 24-Sep-2013
• Ref Project: ETSI EN 300 444 V2.4.1 (2013-07) - Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 444 Version 2.4.1SIST EN 300 444 V2.4.1:2013en01-oktober-2013SIST EN 300 444 V2.4.1:2013SLOVENSKI
STANDARD



SIST EN 300 444 V2.4.1:2013



ETSI EN 300 444 V2.4.1 (2013-07) Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP)
European Standard SIST EN 300 444 V2.4.1:2013



ETSI ETSI EN 300 444 V2.4.1 (2013-07) 2
Reference REN/DECT-000299 Keywords access, DECT, generic, IMT-2000, mobility, profile, radio, synchronization, TDD, TDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 444 V2.4.1:2013



ETSI ETSI EN 300 444 V2.4.1 (2013-07) 3 Contents Intellectual Property Rights . 10 Foreword . 10 1 Scope . 11 2 References . 11 2.1 Normative references . 11 2.2 Informative references . 12 3 Definitions, symbols and abbreviations . 12 3.1 Definitions . 12 3.2 Symbols . 15 3.3 Abbreviations . 15 4 Feature definitions . 17 4.1 NetWorK (NWK) features . 17 4.2 Speech coding and audio features . 19 4.3 Application features . 20 5 Service definitions . 20 5.1 DLC service definitions . 20 5.2 MAC service definitions . 21 6 Inter-operability requirements . 22 6.1 General . 22 6.2 NWK features . 22 6.3 DLC services . 23 6.4 MAC services . 24 6.5 PHysical Layer (PHL) services . 24 6.6 Application features . 24 6.7 Speech coding and audio features . 25 6.8 Feature/service to procedure mapping . 25 6.8.1 NWK feature to procedure mapping . 25 6.8.2 DLC service to procedure mapping . 28 6.8.3 MAC service to procedure mapping . 29 6.8.4 Application feature to procedure mapping . 30 6.8.5 Speech coding and audio feature to procedure mapping. 30 6.9 General requirements . 30 6.9.1 NWK layer message contents . 30 6.9.2 Transaction identifier . 30 6.9.3 Length of a NWK layer message . 30 6.9.4 Handling of error and exception conditions . 30 6.9.5 GAP default setup attributes . 31 6.9.6 Coexistence of MM and CC procedures . 31 6.9.7 Coding rules for information elements . 31 7 Procedure description . 32 8 NWK layer procedures . 32 8.1 Summary of outgoing call messages, normal cases . 32 8.2 Outgoing call request . 34 8.2.1 Associated procedures . 34 8.2.1.1 Timer P- management . 34 8.2.2 Exceptional cases . 35 8.2.2.1 Timer P- expiry . 35 8.2.2.2 PT releases the outgoing call request . 35 8.2.2.3 FT rejects the outgoing call request . 36 8.3 Overlap sending . 36 8.3.1 Associated procedure . 37 SIST EN 300 444 V2.4.1:2013



ETSI ETSI EN 300 444 V2.4.1 (2013-07) 4 8.3.1.1 Timer F- management . 37 8.3.2 Exceptional cases . 37 8.3.2.1 PT releases the outgoing call request . 37 8.3.2.2 FT rejects the outgoing call request . 37 8.3.2.3 Timer F- expiry . 38 8.3.2.4 FT releases the outgoing call request . 38 8.4 Outgoing call proceeding . 38 8.4.1 Exceptional cases . 39 8.4.1.1 PT releases the outgoing call request . 39 8.4.1.2 FT releases the outgoing call request . 39 8.5 Outgoing call confirmation. 40 8.5.1 Exceptional cases . 40 8.5.1.1 PT releases the outgoing call request . 40 8.5.1.2 FT releases the outgoing call request . 41 8.6 Outgoing call connection . 41 8.7 Normal call release . 42 8.7.1 Associated procedures . 42 8.7.1.1 Timer P- management . 42 8.7.1.2 Timer F- management . 43 8.7.2 Exceptional cases . 43 8.7.2.1 Release collisions . 43 8.7.2.2 Timer F- expiry . 44 8.7.2.3 Timer P- expiry . 44 8.8 Abnormal call release . 44 8.9 Partial release . 45 8.10 Sending keypad information. 46 8.11 Summary of incoming call related messages, normal cases . 47 8.12 Incoming call request . 48 8.12.1 Associated procedure . 49 8.12.1.1 Timer F- management . 49 8.12.2 Exceptional cases . 50 8.12.2.1 FT releases the incoming call request . 50 8.12.2.2 PT rejects the incoming call request . 50 8.12.2.3 Timer F- expiry . 51 8.12.3 Collective and group ringing . 51 8.13 Incoming call confirmation . 51 8.13.1 Exceptional cases . 52 8.13.1.1 FT releases the incoming call transaction . 52 8.13.1.2 PT releases the incoming call transaction . 52 8.14 PT alerting . 53 8.15 Incoming call connection . 53 8.15.1 Associated procedure . 54 8.15.1.1 Timer P- management . 54 8.15.2 Exceptional cases . 54 8.15.2.1 FT releases the incoming call transaction . 54 8.15.2.2 PT releases the incoming call transaction . 55 8.15.2.3 Timer P- expiry . 55 8.16 Display . 56 8.17 Terminal capability indication . 56 8.18 Internal call setup . 57 8.19 Internal call keypad . 58 8.20 Service call setup . 58 8.21 Service call keypad . 58 8.22 Identification of PP . 58 8.22.1 Associated procedure . 60 8.22.1.1 Timer F- management . 60 8.22.2 Exceptional cases . 60 8.22.2.1 Identity not existing in the PT . 60 8.22.2.2 Timer F- expiry . 60 8.23 Authentication of FT using DSAA . 60 8.23.1 Associated procedure . 61 8.23.1.1 Timer P- management . 61 SIST EN 300 444 V2.4.1:2013



ETSI ETSI EN 300 444 V2.4.1 (2013-07) 5 8.23.2 Exceptional cases . 61 8.23.2.1 Authentication algorithm/key not supported . 61 8.23.2.2 FT Authentication failure (authentication challenge RES2 has wrong value) . 62 8.23.2.3 Timer P- expiry . 62 8.24 Authentication of PP using DSAA . 62 8.24.1 Associated procedure . 64 8.24.1.1 Timer F- management . 64 8.24.2 Exceptional cases . 64 8.24.2.1 Authentication algorithm/key not supported . 64 8.24.2.2 Timer F- expiry . 64 8.23.2.3 PP Authentication failure (authentication challenge RES1 has wrong value) . 64 8.25 Authentication of user using DSAA . 65 8.25.1 Associated procedure . 65 8.25.1.1 Timer F- management . 65 8.25.2 Exceptional cases . 66 8.25.2.1 Authentication algorithm/key not supported . 66 8.25.2.2 Timer F- expiry . 66 8.26 Incrementing the ZAP value . 66 8.27 Storing the DCK . 67 8.28 Location registration. 67 8.28.1 Associated procedures . 69 8.28.1.1 Timer P- management . 69 8.28.1.2 Timer F- management . 69 8.28.2 Exceptional cases . 69 8.28.2.1 FT rejects the location registration procedure . 69 8.28.2.2 Failure of location registration procedure . 70 8.28.2.3 PT rejects the identity assignment . 70 8.28.2.4 Timer F- expiry. 70 8.29 Location update . 70 8.30 Obtaining access rights . 71 8.30.1 Associated procedure . 73 8.30.1.1 Timer P- management . 73 8.30.2 Exceptional cases . 73 8.30.2.1 FT rejects the access rights . 73 8.30.2.2 Timer P- expiry. 74 8.31 FT terminating access rights . 74 8.31.1 Associated procedure . 75 8.31.1.1 Timer F- management . 75 8.31.2 Exceptional cases . 75 8.31.2.1 PT rejects the termination request . 75 8.31.2.2 Timer F- expiry. 75 8.32 Key allocation . 76 8.32.1 Associated procedures . 77 8.32.1.1 Timer F- management . 77 8.32.1.2 Timer P- management . 78 8.32.2 Exceptional cases . 78 8.32.2.1 Timer F- expiry . 78 8.32.2.2 Timer P- expiry . 78 8.32.2.3 Allocation-type element is unacceptable . 78 8.32.2.4 Authentication of PT fails . 79 8.32.2.5 Authentication of FT fails . 79 8.33 Cipher-switching initiated by FT using DSC . 79 8.33.1 Associated procedure . 81 8.33.1.1 Timer F- management . 81 8.33.2 Exceptional cases . 81 8.33.2.1 PT rejects the cipher request . 81 8.33.2.2 Timer F- expiry . 81 8.34 Cipher-switching initiated by PT using DSC . 82 8.34.1 Associated procedure . 83 8.34.1.1 Timer P- management . 83 8.34.2 Exceptional cases . 83 8.34.2.1 FT rejects the cipher request .
...

ETSI EN 300 444 V2.4.1 (2013-07)






European Standard
Digital Enhanced Cordless Telecommunications (DECT);
Generic Access Profile (GAP)

---------------------- Page: 1 ----------------------
2 ETSI EN 300 444 V2.4.1 (2013-07)



Reference
REN/DECT-000299
Keywords
access, DECT, generic, IMT-2000, mobility,
profile, radio, synchronization, TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2013.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 300 444 V2.4.1 (2013-07)
Contents
Intellectual Property Rights . 10
Foreword . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 15
3.3 Abbreviations . 15
4 Feature definitions . 17
4.1 NetWorK (NWK) features . 17
4.2 Speech coding and audio features . 19
4.3 Application features . 20
5 Service definitions . 20
5.1 DLC service definitions . 20
5.2 MAC service definitions . 21
6 Inter-operability requirements . 22
6.1 General . 22
6.2 NWK features . 22
6.3 DLC services . 23
6.4 MAC services . 24
6.5 PHysical Layer (PHL) services . 24
6.6 Application features . 24
6.7 Speech coding and audio features . 25
6.8 Feature/service to procedure mapping . 25
6.8.1 NWK feature to procedure mapping . 25
6.8.2 DLC service to procedure mapping . 28
6.8.3 MAC service to procedure mapping . 29
6.8.4 Application feature to procedure mapping . 30
6.8.5 Speech coding and audio feature to procedure mapping. 30
6.9 General requirements . 30
6.9.1 NWK layer message contents . 30
6.9.2 Transaction identifier . 30
6.9.3 Length of a NWK layer message . 30
6.9.4 Handling of error and exception conditions . 30
6.9.5 GAP default setup attributes . 31
6.9.6 Coexistence of MM and CC procedures . 31
6.9.7 Coding rules for information elements . 31
7 Procedure description . 32
8 NWK layer procedures . 32
8.1 Summary of outgoing call messages, normal cases . 32
8.2 Outgoing call request . 34
8.2.1 Associated procedures . 34
8.2.1.1 Timer P- management . 34
8.2.2 Exceptional cases . 35
8.2.2.1 Timer P- expiry . 35
8.2.2.2 PT releases the outgoing call request . 35
8.2.2.3 FT rejects the outgoing call request . 36
8.3 Overlap sending . 36
8.3.1 Associated procedure . 37
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 300 444 V2.4.1 (2013-07)
8.3.1.1 Timer F- management . 37
8.3.2 Exceptional cases . 37
8.3.2.1 PT releases the outgoing call request . 37
8.3.2.2 FT rejects the outgoing call request . 37
8.3.2.3 Timer F- expiry . 38
8.3.2.4 FT releases the outgoing call request . 38
8.4 Outgoing call proceeding . 38
8.4.1 Exceptional cases . 39
8.4.1.1 PT releases the outgoing call request . 39
8.4.1.2 FT releases the outgoing call request . 39
8.5 Outgoing call confirmation. 40
8.5.1 Exceptional cases . 40
8.5.1.1 PT releases the outgoing call request . 40
8.5.1.2 FT releases the outgoing call request . 41
8.6 Outgoing call connection . 41
8.7 Normal call release . 42
8.7.1 Associated procedures . 42
8.7.1.1 Timer P- management . 42
8.7.1.2 Timer F- management . 43
8.7.2 Exceptional cases . 43
8.7.2.1 Release collisions . 43
8.7.2.2 Timer F- expiry . 44
8.7.2.3 Timer P- expiry . 44
8.8 Abnormal call release . 44
8.9 Partial release . 45
8.10 Sending keypad information. 46
8.11 Summary of incoming call related messages, normal cases . 47
8.12 Incoming call request . 48
8.12.1 Associated procedure . 49
8.12.1.1 Timer F- management . 49
8.12.2 Exceptional cases . 50
8.12.2.1 FT releases the incoming call request . 50
8.12.2.2 PT rejects the incoming call request . 50
8.12.2.3 Timer F- expiry . 51
8.12.3 Collective and group ringing . 51
8.13 Incoming call confirmation . 51
8.13.1 Exceptional cases . 52
8.13.1.1 FT releases the incoming call transaction . 52
8.13.1.2 PT releases the incoming call transaction . 52
8.14 PT alerting . 53
8.15 Incoming call connection . 53
8.15.1 Associated procedure . 54
8.15.1.1 Timer P- management . 54
8.15.2 Exceptional cases . 54
8.15.2.1 FT releases the incoming call transaction . 54
8.15.2.2 PT releases the incoming call transaction . 55
8.15.2.3 Timer P- expiry . 55
8.16 Display . 56
8.17 Terminal capability indication . 56
8.18 Internal call setup . 57
8.19 Internal call keypad . 58
8.20 Service call setup . 58
8.21 Service call keypad . 58
8.22 Identification of PP . 58
8.22.1 Associated procedure . 60
8.22.1.1 Timer F- management . 60
8.22.2 Exceptional cases . 60
8.22.2.1 Identity not existing in the PT . 60
8.22.2.2 Timer F- expiry . 60
8.23 Authentication of FT using DSAA . 60
8.23.1 Associated procedure . 61
8.23.1.1 Timer P- management . 61
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 300 444 V2.4.1 (2013-07)
8.23.2 Exceptional cases . 61
8.23.2.1 Authentication algorithm/key not supported . 61
8.23.2.2 FT Authentication failure (authentication challenge RES2 has wrong value) . 62
8.23.2.3 Timer P- expiry . 62
8.24 Authentication of PP using DSAA . 62
8.24.1 Associated procedure . 64
8.24.1.1 Timer F- management . 64
8.24.2 Exceptional cases . 64
8.24.2.1 Authentication algorithm/key not supported . 64
8.24.2.2 Timer F- expiry . 64
8.23.2.3 PP Authentication failure (authentication challenge RES1 has wrong value) . 64
8.25 Authentication of user using DSAA . 65
8.25.1 Associated procedure . 65
8.25.1.1 Timer F- management . 65
8.25.2 Exceptional cases . 66
8.25.2.1 Authentication algorithm/key not supported . 66
8.25.2.2 Timer F- expiry . 66
8.26 Incrementing the ZAP value . 66
8.27 Storing the DCK . 67
8.28 Location registration. 67
8.28.1 Associated procedures . 69
8.28.1.1 Timer P- management . 69
8.28.1.2 Timer F- management . 69
8.28.2 Exceptional cases . 69
8.28.2.1 FT rejects the location registration procedure . 69
8.28.2.2 Failure of location registration procedure . 70
8.28.2.3 PT rejects the identity assignment . 70
8.28.2.4 Timer F- expiry. 70
8.29 Location update . 70
8.30 Obtaining access rights . 71
8.30.1 Associated procedure . 73
8.30.1.1 Timer P- management . 73
8.30.2 Exceptional cases . 73
8.30.2.1 FT rejects the access rights . 73
8.30.2.2 Timer P- expiry. 74
8.31 FT terminating access rights . 74
8.31.1 Associated procedure . 75
8.31.1.1 Timer F- management . 75
8.31.2 Exceptional cases . 75
8.31.2.1 PT rejects the termination request . 75
8.31.2.2 Timer F- expiry. 75
8.32 Key allocation . 76
8.32.1 Associated procedures . 77
8.32.1.1 Timer F- management . 77
8.32.1.2 Timer P- management . 78
8.32.2 Exceptional cases . 78
8.32.2.1 Timer F- expiry . 78
8.32.2.2 Timer P- expiry . 78
8.32.2.3 Allocation-type element is unacceptable . 78
8.32.2.4 Authentication of PT fails . 79
8.32.2.5 Authentication of FT fails . 79
8.33 Cipher-switching initiated by FT using DSC . 79
8.33.1 Associated procedure . 81
8.33.1.1 Timer F- management . 81
8.33.2 Exceptional cases . 81
8.33.2.1 PT rejects the cipher request . 81
8.33.2.2 Timer F- expiry . 81
8.34 Cipher-switching initiated by PT using DSC . 82
8.34.1 Associated procedure . 83
8.34.1.1 Timer P- management . 83
8.34.2 Exceptional cases . 83
8.34.2.1 FT rejects the cipher request . 83
ETSI

----
...