SIST ISO 2873:1996
(Main)Packaging -- Complete, filled transport packages -- Low pressure test
Packaging -- Complete, filled transport packages -- Low pressure test
Emballages -- Emballages d'expédition complets et pleins -- Essai de basse pression
Embalaža - Celovita, napolnjena transportna embalaža - Preskus z nizkim atmosferskim tlakom
General Information
Relations
Standards Content (Sample)
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEXAYHAPOfiHAR OPl-AHM3AlJMR I-IO CTAH~APTM3AL(MM.ORGANISATlON INTERNATIONALE DE NORMALlSATlON
Complete, filled transport packages - Low
Packaging -
pressure test
Emballages - Emballages d’exphdition complets et pleins - Essai de basse Pression
Second edition - 1985-12-15
Ref. No. ISO 28734985 (E)
UDC 621.796.1 : 620.165.7
w
-
Descriptors : packing, transport packing, complete-and filled packages, tests, low pressure tests.
0
Price based on 2 pages
sc
---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 2873 was prepared by Technical Committee ISO/TC 122,
Packaging.
This second edition cancels and replaces the first edition (ISO 287349731, which has
been technically revised as follows:
a new clause on “Package preparation” has been added;
-
pressure values in kilopascals have been added to the table.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1985 0
Printed in Switzerland
---------------------- Page: 2 ----------------------
INTERNATIONAL STANDARD ISO 28734985 (El
Packaging - Complete, filled transport packages -
Low pressure test
1 Scope and field of application 4 Apparatus
Pressure vessel, of sufficient size to accommodate the test
This International Standard specifies a method for subjecting
package, and with pressure and temperature controls to meet
complete, filled transport packages to conditions of low air
the requirements of the procedure in clause 7.
pressure encountered in aircraft.
This method is applicable to complete, filled transport
5 Package preparation
packages which are transported by unpressurized aircraft flying
at 3 500 m or less and pressurized aircraft flying at any higher
The test package shall normally be filled with its intended con-
altitude.
tents. However, simulated or dummy contents may be used,
on condition that the dimensions and physical proper-Ges of
...
SLOVENSKI STANDARD
SIST ISO 2873:1996
01-marec-1996
Embalaža - Celovita, napolnjena transportna embalaža - Preskus z nizkim
atmosferskim tlakom
Packaging -- Complete, filled transport packages -- Low pressure test
Emballages -- Emballages d'expédition complets et pleins -- Essai de basse pression
Ta slovenski standard je istoveten z: ISO 2873:1985
ICS:
55.180.40 Celovita, napolnjena Complete, filled transport
transportna embalaža packages
SIST ISO 2873:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 2873:1996
---------------------- Page: 2 ----------------------
SIST ISO 2873:1996
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEXAYHAPOfiHAR OPl-AHM3AlJMR I-IO CTAH~APTM3AL(MM.ORGANISATlON INTERNATIONALE DE NORMALlSATlON
Complete, filled transport packages - Low
Packaging -
pressure test
Emballages - Emballages d’exphdition complets et pleins - Essai de basse Pression
Second edition - 1985-12-15
Ref. No. ISO 28734985 (E)
UDC 621.796.1 : 620.165.7
w
-
Descriptors : packing, transport packing, complete-and filled packages, tests, low pressure tests.
0
Price based on 2 pages
sc
---------------------- Page: 3 ----------------------
SIST ISO 2873:1996
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 2873 was prepared by Technical Committee ISO/TC 122,
Packaging.
This second edition cancels and replaces the first edition (ISO 287349731, which has
been technically revised as follows:
a new clause on “Package preparation” has been added;
-
pressure values in kilopascals have been added to the table.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organkation for Standardkation, 1985 0
Printed in Switzerland
---------------------- Page: 4 ----------------------
SIST ISO 2873:1996
INTERNATIONAL STANDARD ISO 28734985 (El
Packaging - Complete, filled transport packages -
Low pressure test
1 Scope and field of application 4 Apparatus
Pressure vessel, of sufficient size to accommodate the test
This International Standard specifies a method for subjecting
package, and with pressure and temperature controls to meet
complete, filled transport packages to conditions of low air
the requirements of the procedure in clause 7.
pressure encountered in aircraft.
This method is applicable to c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.