SIST EN 14358:2007
(Main)Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
This document specifies a method for the determination of characteristic 5-percentile values from test results for fasteners and wood-based products.
This document also gives corresponding acceptance criteria for a sample.
Structural timber is not covered by this document but by EN 384.
Sampling is not covered by this document, but reference is made to the relevant product standards.
Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für Proben
Diese Europäische Norm gilt für Kohlenstoffdioxid zur Aufbereitung von Wasser für den menschlichen
Gebrauch. Sie beschreibt die Eigenschaften von Kohlenstoffdioxid und legt die Anforderungen sowie die
entsprechenden Analysenverfahren für Kohlenstoffdioxid fest. Des Weiteren gibt sie Informationen für die
Anwendung von Kohlenstoffdioxid in der Wasseraufbereitung.
Structures en bois - Détermination des valeurs correspondant au fractile a 5 % d'exclusion inférieure et criteres d'acceptation pour un échantillon
Le présent document indique une méthode de détermination des valeurs caractéristiques correspondant au
fractile a 5 % d’exclusion inférieure a partir de résultats d’essai, pour les assembleurs et les produits a base
de bois.
Le présent document donne également les criteres d’acceptation correspondant pour un échantillon.
Le bois de structure n’est pas couvert par le présent document mais par l’EN 384.
L’échantillonnage n’est pas couvert par le présent document, mais il est fait référence aux normes de produits
utiles.
Lesene konstrukcije - Računske lastnosti 5-percentilne vrednosti in privzemni kriteriji za vzorce
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für ProbenStructures en bois - Détermination des valeurs correspondant au fractile a 5 % d'exclusion inférieure et criteres d'acceptation pour un échantillonTimber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample91.080.20Lesene konstrukcijeTimber structuresICS:Ta slovenski standard je istoveten z:EN 14358:2006SIST EN 14358:2007en,fr,de01-julij-2007SIST EN 14358:2007SLOVENSKI
STANDARD
SIST EN 14358:2007
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14358
December 2006 ICS 79.040; 91.080.20 English Version
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
Structures en bois - Détermination des valeurs correspondant au fractile à 5 % d'exclusion inférieure et critères d'acceptation pour un échantillon
Holzbauwerke - Berechnung der 5%-Quantile für charakteristische Werte und Annahmekriterien für ProbenThis European Standard was approved by CEN on 25 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14358:2006: ESIST EN 14358:2007
EN 14358:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Symbols.4 4 Calculation of characteristic values from test results.5 5 Acceptance criteria for a sample.6 Bibliography.8 SIST EN 14358:2007
EN 14358:2006 (E) 3 Foreword This document (EN 14358:2006) has been prepared by Technical Committee CEN/TC 124 "Timber Structures", the secretariat of which is held by SFS. This document (EN 14358:2006) is based on Annex D of EN 1990:2002, Eurocode – Basis of structural design. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. It is anticipated that the standard will replace the corresponding parts of EN 1058: Wood-based panels – Determination of characteristics values of mechanical properties and density. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN/CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerlan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.