SIST EN 62264-3:2007
Enterprise-control system integration -- Part 3: Activity models of manufacturing operations management
Enterprise-control system integration -- Part 3: Activity models of manufacturing operations management
This part of IEC 62264 defines activity models of manufacturing operations management that enable enterprise system to control system integration. The activities defined in this standard are consistent with the object models definitions given in IEC 62264-1. The modelled activities operate between business planning and logistics functions, defined as the Level 4 functions and the process control functions, defined as the Level 2 functions of IEC 62264-1. The scope of this standard is limited to - a model of the activities associated with manufacturing operations management, Level 3 functions; - an identification of some of the data exchanged between Level 3 activities.
Integration von Unternehmens-EDV und Leitsystemen -- Teil 3: Aktivitätsmodelle für das operative Produktionsmanagement
Intégration du système de commande d'entreprise -- Partie 3: Modèles d'activités pour la gestion des opérations de fabrication
Expose les modèles d'activité et les flux de données pour les informations de fabrication permettant l'intégration des systèmes de commande d'entreprise. Les activités modélisées agissent entre les fonctions de planification et de logistique d'entreprises de Niveau 4 et les fonctions de contrôle de processus manuels et automatiques de Niveau 2. Les modèles sont cohérents avec les modèles d'objets de la CEI 62264-1 et avec les définitions (commande et opérations de fabrication) du Niveau 3. L'objectif de la présente norme est de réduire le risque, le coût et les erreurs associés à la mise en uvre des systèmes d'entreprise et des systèmes de gestion des opérations de fabrication de telle sorte qu'ils interagissent et s'intègrent facilement. La norme peut aussi être utilisée pour réduire l'effort associé à la mise en place de nouveaux produits proposés.
Integracija sistemov za upravljanje podjetij - 3. del: Model aktivnosti vodenja proizvodnje (IEC 62264-3:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62264-3:2007
01-december-2007
Integracija sistemov za upravljanje podjetij - 3. del: Model aktivnosti vodenja
proizvodnje (IEC 62264-3:2007)
Enterprise-control system integration - Part 3: Activity models of manufacturing
operations management
Integration von Unternehmens-EDV und Leitsystemen - Teil 3: Aktivitätsmodelle für das
operative Produktionsmanagement
Intégration du systeme de commande d'entreprise - Partie 3: Modeles d'activités pour la
gestion des opérations de fabrication
Ta slovenski standard je istoveten z: EN 62264-3:2007
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62264-3:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62264-3
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 25.040.01; 35.240.50
English version
Enterprise-control system integration -
Part 3: Activity models of manufacturing operations management
(IEC 62264-3:2007)
Intégration du système Integration von Unternehmens-EDV
de commande d'entreprise - und Leitsystemen -
Partie 3: Modèles d'activités Teil 3: Aktivitätsmodelle
pour la gestion des opérations für das operative
Produktionsmanagement
de fabrication
(CEI 62264-3:2007) (IEC 62264-3:2007)
This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62264-3:2007 E
---------------------- Page: 2 ----------------------
EN 62264-3:2007 - 2 -
Foreword
The text of document 65A/476/CDV, future edition 1 of IEC 62264-3 prepared by SC 65A, System
aspects, of IEC TC 65, Industrial-process measurement and control, and SC 5, JWG 15, of ISO TC 184,
Enterprise-control system integration, was submitted to the IEC-CENELEC parallel Unique Acceptance
Procedure and was approved by CENELEC as EN 62264-3 on 2007-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62264-3:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62264-3:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61512-1 1997 Batch control - EN 61512-1 1999
Part 1: Models and terminology
1)
IEC 62264-1 - Enterprise-control system integration - - -
Part 1: Models and terminology
1)
IEC 62264-2 - Enterprise-control system integration - - -
Part 2: Object model attributes
ISO 15704 2000 Industrial automation systems - Requirements- -
for enterprise-reference architectures and
methodologies
1)
Undated reference.
---------------------- Page: 4 ----------------------
INTERNATIONAL IEC
STANDARD
CEI
62264-3
NORME
First edition
INTERNATIONALE
Première édition
2007-06
Enterprise-control system integration –
Part 3:
Activity models of manufacturing
operations management
Intégration du système
de commande d’entreprise –
Partie 3:
Modèles d’activités pour la gestion
des opérations de fabrication
PRICE CODE
XE
CODE PRIX
For price, see current catalogue
Pour prix, voir catalogue en vigueur
---------------------- Page: 5 ----------------------
– 2 – 62264-3 © IEC:2007
CONTENTS
FOREWORD.6
INTRODUCTION.8
1 Scope.9
2 Normative references .9
3 Terms, definitions and abbreviations .9
3.1 Terms and definitions .9
3.2 Abbreviations .11
4 Structuring models .12
4.1 Manufacturing operations management .12
4.2 Functional hierarchy.13
4.3 Manufacturing operations management elements .15
4.4 Criterion for defining activities below Level 4.15
4.5 Categories of production information .15
4.6 Manufacturing operations information.16
5 Structuring models .17
5.1 Generic template for categories of manufacturing operations management .17
5.2 Interaction among generic activity models .18
5.3 Expanded equipment hierarchy model .20
5.4 Expanded decision hierarchy model .22
5.5 Hierarchy of planning and scheduling .25
5.6 Resource definition for scheduling activities .26
6 Production operations management.27
6.1 General activities in production operations management .27
6.2 Production operations management activity model .27
6.3 Information exchange in production operations management.28
6.4 Product definition management .29
6.5 Production resource management .31
6.6 Detailed production scheduling.34
6.7 Production dispatching .37
6.8 Production execution management.41
6.9 Production data collection .42
6.10 Production tracking .43
6.11 Production performance analysis.45
7 Maintenance operations management .50
7.1 General activities in maintenance operations management.50
7.2 Maintenance operations management activity model .50
7.3 Information exchanged in maintenance operations management .51
7.4 Maintenance definition management .53
7.5 Maintenance resource management .54
7.6 Detailed maintenance scheduling .54
7.7 Maintenance dispatching .55
7.8 Maintenance execution management.55
---------------------- Page: 6 ----------------------
62264-3 © IEC:2007 – 3 –
7.9 Maintenance data collection .55
7.10 Maintenance tracking .55
7.11 Maintenance analysis .56
8 Quality operations management .57
8.1 General activities in quality operations management .57
8.2 Quality test operations activity model .59
8.3 Information exchanged in quality test operations management .60
8.4 Quality test definition management.62
8.5 Quality test resource management .62
8.6 Detailed quality test scheduling .63
8.7 Quality test dispatching .64
8.8 Quality test execution management.64
8.9 Quality test data collection .65
8.10 Quality test tracking .65
8.11 Quality performance analysis .65
8.12 Supported activities.66
9 Inventory operations management.67
9.1 General activities in inventory operations management .67
9.2 Inventory operations management activity model .68
9.3 Information exchanged in inventory operations management.69
9.4 Inventory definition management.70
9.5 Inventory resource management .70
9.6 Detailed inventory scheduling.71
9.7 Inventory dispatching .72
9.8 Inventory execution management .72
9.9 Inventory tracking.73
9.10 Inventory analysis .74
10 Completeness, compliance and conformance .75
10.1 Completeness .75
10.2 Compliance .75
10.3 Conformance.75
Annex A (informative) Other enterprise activities affecting manufacturing operations .76
Annex B (informative) Technical and responsibility boundaries .81
Annex C (informative) Scheduling hierarchy.86
Annex D (informative) Associated standards.88
Annex E (informative) Frequently asked questions.92
Annex F (informative) Applying the decision hierarchy model to manufacturing
operations management.95
Annex G (informative) Mapping PSLX ontology to manufacturing operations management. 100
Annex H (informative) Advanced planning and scheduling concepts for manufacturing
operations management.105
Bibliography.109
Figure 1 – Manufacturing operations management model .13
---------------------- Page: 7 ----------------------
– 4 – 62264-3 © IEC:2007
Figure 2 – Multi-level functional hierarchy of activities .14
Figure 3 – Activity relationships .14
Figure 4 – Categories of information exchange .16
Figure 5 – Manufacturing operations information.17
Figure 6 – Generic activity model of manufacturing operations management .18
Figure 7 – Detailed scheduling interactions.20
Figure 8 – Typical expanded equipment hierarchy .21
Figure 9 – Work centres and work units .22
Figure 10 – Decision hierarchy model framework for Level 3.23
Figure 11 – Decision-making with two variables .24
Figure 12 – Schematic relationship of planning and scheduling.25
Figure 13 – Projected inventory for a consumable resource .26
Figure 14 – Activity model of production operations management .28
Figure 15 – Product definition management activity model interfaces.29
Figure 16 – Production resource management activity model interfaces.31
Figure 17 – Resource management capacity reporting.33
Figure 18 – Detailed production scheduling activity model interfaces .35
Figure 19 – Splitting and merging production schedules to detailed production schedules .36
Figure 20 – Detailed production schedule .37
Figure 21 – Production dispatching activity model interfaces .38
Figure 22 – Sample production dispatch list.39
Figure 23 – Work dispatching for mixed process facility .40
Figure 24 – Production execution management activity model interfaces .41
Figure 25 – Production data collection activity model interfaces.43
Figure 26 – Production tracking activity model interfaces.44
Figure 27 – Merging and splitting production tracking information .45
Figure 28 – Production performance analysis activity model interfaces .46
Figure 29 – Activity model of maintenance operations management.51
Figure 30 – Activity model of quality test operations management .60
Figure 31 – Activity model of inventory operations management .68
Figure 32 – Inventory data collection activity model .73
Figure A.1 – Other enterprise activities affecting manufacturing operations .76
Figure A.2 – Functions in management of regulatory compliance .79
Figure B.1 – Different boundaries of responsibility .82
Figure B.2 – Lines of technical integration .84
Figure C.1 – Sample hierarchy of schedules and scheduling activities. .87
Figure E.1 – PRM scope and standard focus .93
Figure F.1 – Decision hierarchy within an operational category.96
Figure F.2 – Decision hierarchy within an activity.96
Figure F.3 – Examples of decision hierarchies for resource management .97
Figure G.1 – PSLX ontology, part 1.103
Figure G.2 – PSLX ontology, part 2.103
Figure G.3 – PSLX ontology, part 3.104
Figure H.1 – Levels of decision-making for production . 107
---------------------- Page: 8 ----------------------
62264-3 © IEC:2007 – 5 –
Table 1 – Storage zone and storage unit examples.21
Table G.1 – IEC 62264 relationship to PSLX.101
---------------------- Page: 9 ----------------------
– 6 – 62264-3 © IEC:2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENTERPRISE-CONTROL SYSTEM INTEGRATION –
Part 3: Activity models of manufacturing operations management
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62264-1 has been prepared by subcommittee 65A: System
aspects, of IEC technical committee 65: Industrial-process measurement and control and
ISO SC5, JWG 15, of ISO technical committee 184: Enterprise-control system integration.
It is published as a double logo standard.
The text of this standard is based on the following documents:
CDV Report on voting
65A/476/CDV 65A/495/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table. In ISO, the standard has been approved by 10 P-members
out of 10 hving cast a vote.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 10 ----------------------
62264-3 © IEC:2007 – 7 –
The list of all the parts of the IEC 62264 series, under the general title Enterprise-control
system integration, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
– 8 – 62264-3 © IEC:2007
INTRODUCTION
This part of IEC 62264 shows activity models and data flows for manufacturing information
that enables enterprise-control system integration. The modelled activities operate between
Level 4 logistics and planning functions and Level 2 manual and automated process control
functions. The models are consistent with the object models given in IEC 62264-1 and the
Level 3 (manufacturing operations and control) definitions.
The goal of the standard is to reduce the risk, cost and errors associated with implementing
enterprise systems and manufacturing operations systems in such a way that they inter-
operate and easily integrate. The standard may also be used to reduce the effort associated
with implementing new product offerings.
This standard provides models and terminology for defining the activities of manufacturing
operations management. The models and terminology defined in this standard are:
– to emphasize the good practices of manufacturing operations;
– to be used to improve existing manufacturing operations systems;
– to be applied regardless of the degree of automation.
Some potential benefits produced when applying the standard may include
– reducing the time to reach full production levels for new products;
– enabling vendors to supply appropriate tools for manufacturing operations;
– enabling more uniform and consistent identification of manufacturing needs;
– reducing the cost of automating manufacturing processes;
– optimizing supply chains;
– improving efficiency in life-cycle engineering efforts.
It is not the intent of this part of the standard to
– suggest that there is only one way of implementing manufacturing operations;
– force users to abandon their current way of handling manufacturing operations;
– restrict development in the area of manufacturing operations;
– restrict use only to manufacturing industries.
---------------------- Page: 12 ----------------------
62264-3 © IEC:2007 – 9 –
ENTERPRISE-CONTROL SYSTEM INTEGRATION –
Part 3: Activity models of manufacturing operations management
1 Scope
This part of IEC 62264 defines activity models of manufacturing operations management that
enable enterprise system to control system integration. The activities defined in this standard
are consistent with the object models definitions given in IEC 62264-1. The modelled activities
operate between business planning and logistics functions, defined as the Level 4 functions
and the process control functions, defined as the Level 2 functions of IEC 62264-1. The
scope of this standard is limited to
– a model of the activities associated with manufacturing operations management, Level 3
functions;
– an identification of some of the data exchanged between Level 3 activities.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61512-1:1997, Batch control – Part 1: Models and terminology
IEC 62264-1, Enterprise-control system integration – Part 1: Models and terminology
IEC 62264-2, Enterprise-control system integration – Part 2: Object model attributes
ISO 15704:2000, Industrial automation systems – Requirements for enterprise-reference
architecture and methodologies
3 Terms, definitions and abbreviations
For the purposes of this document, the following terms and definitions apply.
3.1 Terms and definitions
3.1.1
detailed production schedule
organized and structured collection of production work orders and sequencing involved in the
production of one or more products
3.1.2
finite capacity scheduling
scheduling methodology where work is scheduled for production equipment, in such a way
that no production equipment capacity requirement exceeds the capacity available to the
production equipment
3.1.3
inventory operations management
activities within Level 3 of a manufacturing facility which coo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.