SIST EN 3997:2016

Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm

This standard specifies the requirements relating to:
Aluminium alloy AL-P2024- Al Cu4Mg1
T3
Sheet and strip
0,4 mm ≤ a ≤ 6 mm
for aerospace applications.

Luft- und Raumfahrt - Aluminiumlegierung AL-P2024- Al Cu4Mg1 - T3 - Bleche und Bänder - 0,4 mm ≤ a ≤ 6 mm

Diese Norm legt die Anforderungen an
Aluminiumlegierung AL-P2024- Al Cu4Mg1
T3
Bleche und Bänder
0,4 mm ≤ a ≤ 6 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage d'aluminium AL-P2024- Al Cu4Mg1 - T3 - Tôles et bandes - 0,4 mm ≤ a ≤ 6 mm

Aeronavtika - Aluminijeva zlitina AL-P2024-Al Cu4Mg1 - T3 - Pločevina in trakovi - 0,4 mm ≤ a ≤ 6 mm

Ta standard določa zahteve glede:
aluminijeve zlitine AL-P2024- Al Cu4Mg1,
T3
pločevine in trakov
0,4 mm < a ≤ 6 mm,
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 13-Dec-2015
• ICS: 49.025.20 - Aluminium
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Dec-2015
• Due Date: 11-Feb-2016
• Completion Date: 14-Dec-2015
• Ref Project: EN 3997:2015 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm

Relations

• Replaces: SIST EN 3997:2009 - Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm
• Effective Date: 01-Jan-2016
• Replaces: SIST EN 3997:2009 - Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3997:2016
01-januar-2016
1DGRPHãþD
SIST EN 3997:2009
$HURQDYWLND$OXPLQLMHYD]OLWLQD$/3$O&X0J73ORþHYLQDLQWUDNRYL
PP”D”PP
$HURVSDFHVHULHV$OXPLQLXPDOOR\$/3$O&X0J76KHHWDQGVWULS
PP”D”PP
/XIWXQG5DXPIDKUW$OXPLQLXPOHJLHUXQJ$/3$O&X0J7%OHFKHXQG
%lQGHUPP”D”PP
6pULHDpURVSDWLDOH$OOLDJHG
DOXPLQLXP$/3$O&X0J77{OHVHWEDQGHV
PP”D”PP
Ta slovenski standard je istoveten z: EN 3997:2015
ICS:
49.025.20 Aluminij Aluminium
SIST EN 3997:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3997:2016

---------------------- Page: 2 ----------------------

SIST EN 3997:2016


EN 3997
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 49.025.20 Supersedes EN 3997:2007
English Version

Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1
- T3 - Sheet and strip - 0,4 mm  a  6 mm
Série aérospatiale - Alliage d'aluminium AL-P2024- Al Luft- und Raumfahrt - Aluminiumlegierung AL-P2024-
Cu4Mg1 - T3 - Tôles et bandes - 0,4 mm  a  6 mm Al Cu4Mg1 - T3 - Bleche und Bänder - 0,4 mm  a  6
mm
This European Standard was approved by CEN on 14 March 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3997:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3997:2016
EN 3997:2015 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5

2

---------------------- Page: 4 ----------------------

SIST EN 3997:2016
EN 3997:2015 (E)
European foreword
This document (EN 3997:2015) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 3997:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria
...