SIST EN 16291-1:2013

Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish

This document specifies the dimensions of the screw finish for glass containers designated MCA 2 for returnable glass.

Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 2-Mundstück

Dieses Dokument legt die Maße des Schraubmundstückes für Mehrweg-Behältnisse aus Glas, bezeichnet mit MCA 2, fest.

Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 2 pour verre consigné

Le présent document spécifie les dimensions de la bague à vis pour récipients en verre consigné, désignée sous l'appellation bague MCA 2.

Steklena embalaža - Grla z navojem za steklenice pod tlakom - 1. del: Vračljiva steklenica z grlom MCA 2

Ta dokument določa mere za grla z navojem za steklene posode MCA 2 za vračljive steklenice.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 31-Aug-2011
• Publication Date: 03-Apr-2013
• Withdrawal Date: 15-Aug-2023
• ICS: 55.100 - Bottles. Pots. Jars
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 04-Aug-2023
• Due Date: 27-Aug-2023
• Completion Date: 16-Aug-2023
• Ref Project: EN 16291-1:2013 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish

Relations

• Replaced By: SIST EN 17829:2023 - Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
• Effective Date: 01-Sep-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 2-MundstückEmballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 2 pour verre consignéGlass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16291-1:2013SIST EN 16291-1:2013en,fr,de01-maj-2013SIST EN 16291-1:2013SLOVENSKI
STANDARD



SIST EN 16291-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16291-1
March 2013 ICS 55.100 English Version
Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 2 pour verre consigné
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 2-Mundstück This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16291-1:2013: ESIST EN 16291-1:2013



EN 16291-1:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Dimensions. 5 Bibliography. 10
SIST EN 16291-1:2013



EN 16291-1:2013 (E) 3 Foreword This document (EN 16291-1:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is d
...

SLOVENSKI STANDARD
oSIST prEN 16291-1:2011
01-julij-2011
6WHNOHQDHPEDODåD*UOD]QDYRMHP]DVWHNOHQLFHSRGWODNRPGHO9UDþOMLYD
VWHNOHQDJUOD0&$
Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA
2 finish
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 1:
Mehrweg-MCA 2-Mundstück
Emballage en verre - Bagues à vis pour capsules à pression - Partie 1: Bague MCA 2
pour verre consigné
Ta slovenski standard je istoveten z: prEN 16291-1
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
oSIST prEN 16291-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16291-1:2011

---------------------- Page: 2 ----------------------
oSIST prEN 16291-1:2011


EUROPEAN STANDARD
DRAFT
prEN 16291-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2011
ICS 55.100
English Version
Glass packaging - Screw finishes for pressure capsules - Part 1:
Returnable glass MCA 2 finish
Emballage en verre - Bagues à vis pour capsules à Verpackungen aus Glas - Schraubmundstücke für
pression - Partie 1: Bague MCA 2 pour verre consigné Flaschen mit Innendruck - Teil 1: Mehrweg-MCA 2-
Mundstück
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 261.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16291-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16291-1:2011
prEN 16291-1:2011 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Definitions .5
3 Dimensions .
...